Klaus
07-07-2005, 01:02 PM
This information applies to K trucks and utilities, and Hummer H2, between 1996-2005 with the 8.25 and 9.25 axle.
If the left front axle shaft is difficult to remove, follow these steps.
1. Remove the front axle assembly from the vehicle. Refer to published service procedures.
2. Position the front axle assembly straight up and down, with the left stub shaft facing upward.
3. Using a ball peen hammer, tap the left stub shaft flange down and up repeatedly until the stub shaft separates from the axle assembly. This step centers the C-clip in the retaining groove of the stub shaft.
If the left front axle shaft is difficult to remove, follow these steps.
1. Remove the front axle assembly from the vehicle. Refer to published service procedures.
2. Position the front axle assembly straight up and down, with the left stub shaft facing upward.
3. Using a ball peen hammer, tap the left stub shaft flange down and up repeatedly until the stub shaft separates from the axle assembly. This step centers the C-clip in the retaining groove of the stub shaft.