PDA

View Full Version : K&N installed! With pics!


FLYINGBADGER2006
09-28-2005, 03:49 AM
I purchased my K&N on ebay for $216.00. Install was no problem. Took it out for a spin after I did the install and all went fine. No rattling, no abnormal engine noise. I hope to see a slight improvent on performance and gas milage.
I am looking into Magnaflows or Borlas for a cat-back exhaust in the near future.

FLYINGBADGER2006
09-28-2005, 03:49 AM
I purchased my K&N on ebay for $216.00. Install was no problem. Took it out for a spin after I did the install and all went fine. No rattling, no abnormal engine noise. I hope to see a slight improvent on performance and gas milage.
I am looking into Magnaflows or Borlas for a cat-back exhaust in the near future.

FLYINGBADGER2006
09-28-2005, 03:49 AM
another pic.

FLYINGBADGER2006
09-28-2005, 03:50 AM
and heres another.

boulderhummer
09-28-2005, 08:14 AM
engine light come on yet??

FLYINGBADGER2006
09-28-2005, 10:18 AM
no. I was expecting a engine light to come on after reading other posts about this subject. But I had no engine light.

MyxH3
09-28-2005, 12:25 PM
Looks like a clean fitment. Let us know how it goes

JohnB.GWU.
09-28-2005, 06:21 PM
why does the tube's diameter decrease at the filter.

according to the commericals, is that really a precision engineered tube or bottle neck restriction to increase velocity or some bs?

Kid Shyleen
09-28-2005, 07:54 PM
Per http://www.kandn.com

"Next we attach the filter to a rotationally molded tube made from interlaced High Density Polyethylene. This process allows us to precisely shape the tube to reduce turbulence and accelerate airflow into the engine. This is why some of our tubes have unique shapes or indentations that are specifically engineered for each application."

FYI...

ChevyHighPerformance
09-28-2005, 09:39 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by JohnB.GWU.:
why does the tube's diameter decrease at the filter.

according to the commericals, is that really a precision engineered tube or bottle neck restriction to increase velocity or some bs? </div></BLOCKQUOTE>

This is where the mass air sensor is transplanted from the stock air box base to this area. The internal cross sectional areas have to be the same for proper air flow rate measurements.

First Hummer
10-05-2005, 03:52 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by FLYINGBADGER2006:
and heres another. </div></BLOCKQUOTE>

Nice Install Fly looks so sweet that mine will be here Thursday.

Ely
10-05-2005, 11:06 PM
To be honest, I tried on a Magna-flow, Flowmaster, and, Dynaflow on my car before I chose Remus. The Remus gave me a quality deep sound while the others sounded kind of trashy. I would definately look into remus before installing anything else.

I can actually help you get a good deal on any sort of exhaust system on your truck though. Let me know if you're interested.

Captain Steve
10-05-2005, 11:18 PM
I installed the AirRaid system...179 bucks. Great sound and great acceleration. No engine light problem. Did finnally get it up to 105 on a long strait away. I thought there was a governor

kacyk
10-06-2005, 04:07 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Captain Steve:
I installed the AirRaid system...179 bucks. Great sound and great acceleration. No engine light problem. Did finnally get it up to 105 on a long strait away. I thought there was a governor </div></BLOCKQUOTE>

Complete Airaid or Airaid Junior? I went to Airaid and did not find an application for the H3.

First Hummer
10-06-2005, 05:37 PM
I just got done installing mine last night.Pretty easy install didnt take me long maybe 1 hour.I didnt get any check engine light when I started it up so thats good.I did get the gaskets backwards at first,but then Brain started to function again.I have the SMA exhaust already so maybe ill see a little more giddy up.

FLYINGBADGER2006
10-07-2005, 02:48 PM
How much did you pay for the SMA exhaust?

First Hummer
10-07-2005, 04:17 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by FLYINGBADGER2006:
How much did you pay for the SMA exhaust? </div></BLOCKQUOTE>

$699

FLYINGBADGER2006
10-07-2005, 08:07 PM
THATS A GOOD PRICE.

IS IT POSSIBLE TO PURCHASE FOR THAT SAME PRICE? WHERE DID YOU GET IT?

First Hummer
10-08-2005, 12:51 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by FLYINGBADGER2006:
THATS A GOOD PRICE.

IS IT POSSIBLE TO PURCHASE FOR THAT SAME PRICE? WHERE DID YOU GET IT? </div></BLOCKQUOTE>

Got it rite here from Jason,check H3 accesories.

hmrlvr
10-21-2005, 10:43 PM
flyingbadger, is there a cover for the K&N aircharger you installed? I saw a Volant on another thread with a cover. Apparently the cover will force the system to pull cool air from outside the vehicle instead of warm air from under the hood. I know you have a K&N but will the cooler air increase the HP more than the warmer air? Anyone have any feedback please let me know. I'm ready to order one of them and am trying to decide. Thanks

FLYINGBADGER2006
10-22-2005, 01:56 AM
Well I know this much. K&N has been around for a long, long time and their products are race and road tested proven. I think the K&N allows alot more air intake, which some of that air is cold air could include engine radiant heat. When the hood comes down the "L" shaped wall that separates the air filter from the engine makes a box like compartment. The K&N also allows forced air from the front, and through the grille. I never seen a Volant up close and personal. But right off it looks cool and looks very enhancing to the performance to the air intake. Then I say, It looks just as restricting as the stock air intake. The stock intake is in a confind box like shape, as does the Volant. Grant it the stock air intake has baffles or a a resinator which distrupts the normal air flow to the intake manifold. I know the K&N and Volant are both better products than the stock intake. I know the Volant is more expensive and looks more astheticly better than just the K&N tube and a K&N filter. But its my opinon that the Volant looks like it makes the air harder to injest in that tight space and though it may block out hot engine air, it probably would restrict the cold air too. Versus the K&N which would allow more and all air to flow more easily. Which thats what we want is more colder unrestricting air.
I hope this helps.

WhiteH3
10-22-2005, 02:01 PM
K&N Dyno charts, pics, etc.
http://elcova.com/groupee/forums/a/tpc/f/4871031121/m/7...751044831#7751044831 (http://elcova.com/groupee/forums/a/tpc/f/4871031121/m/7001061831/r/7751044831#7751044831)

First Hummer
10-22-2005, 02:06 PM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by FLYINGBADGER2006:
Well I know this much. K&N has been around for a long, long time and their products are race and road tested proven. I think the K&N allows alot more air intake, which some of that air is cold air could include engine radiant heat. When the hood comes down the "L" shaped wall that separates the air filter from the engine makes a box like compartment. The K&N also allows forced air from the front, and through the grille. I never seen a Volant up close and personal. But right off it looks cool and looks very enhancing to the performance to the air intake. Then I say, It looks just as restricting as the stock air intake. The stock intake is in a confind box like shape, as does the Volant. Grant it the stock air intake has baffles or a a resinator which distrupts the normal air flow to the intake manifold. I know the K&N and Volant are both better products than the stock intake. I know the Volant is more expensive and looks more astheticly better than just the K&N tube and a K&N filter. But its my opinon that the Volant looks like it makes the air harder to injest in that tight space and though it may block out hot engine air, it probably would restrict the cold air too. Versus the K&N which would allow more and all air to flow more easily. Which thats what we want is more colder unrestricting air.
I hope this helps. </div></BLOCKQUOTE>

Hey Fly,just a FYI check the bolt that holds the bracket in place on the intake.Mine fell off somehow must have loosened up somewhere along the way.

hmrlvr
10-22-2005, 03:04 PM
Thanks for the info, much appreciated.

FLYINGBADGER2006
10-22-2005, 03:11 PM
Thanks for the heads up "1st Hummer" I will give the K&N a once over to see if anything is loose.

Klint
10-22-2005, 03:16 PM
I really wish I could hear it before I buy. I do not want my Tuff H3 to sound like a little Honda Civic I had a Z71 truck before this and I had Borla on it sounded VERY good.. I am just scared of what a 5 banger is going to sound like

Bling
10-25-2005, 12:45 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Captain Steve:
I installed the AirRaid system...179 bucks. Great sound and great acceleration. No engine light problem. Did finnally get it up to 105 on a long strait away. I thought there was a governor </div></BLOCKQUOTE>

I got a freak'n ticket (warning) today and have to remove my K&N and get police officer to sign off. Guess these are illegal in CA.

DDWH
10-25-2005, 01:02 AM
How the heck did they know you had it? Did they make you open the hood? Ya, its a screwed deal here in Cali, you can run the filter, but can't run the complete kit. What a crock if you ask me. I think you would have to put the stock crap on when you get it smogged aswell....unless you have someone that takes a bag of pistachios to overlook those kind of modshttp://www.elcova.com/infopop/emoticons/icon_biggrin.gif

H3.007
05-15-2006, 02:53 AM
I purchased my K&N on ebay for $216.00. Install was no problem. Took it out for a spin after I did the install and all went fine. No rattling, no abnormal engine noise. I hope to see a slight improvent on performance and gas milage.
I am looking into Magnaflows or Borlas for a cat-back exhaust in the near future.

Hey Badger,

On the front of your K&N install, to the left of the MAS, you have a black tube coming out of a white nozzle from the intake tube. I believe the instructions mentioned that this was something to do with a fuel sensor. When I installed the FIPK, I didn't see where mine had a connection for this port sso I plugged it with the plastic bolt that K&N provided. Now that i see yours, I wonder, does the 3.5 have this sensor? Mine seems to run fine without it... BUT when it kicks in to the passing gear, it is very loud and I notice a resonance vibration of sorts. Is this normal?

Thanks,
Chris

ChevyHighPerformance
05-15-2006, 10:47 PM
Hey Badger,

On the front of your K&N install, to the left of the MAS, you have a black tube coming out of a white nozzle from the intake tube. I believe the instructions mentioned that this was something to do with a fuel sensor. When I installed the FIPK, I didn't see where mine had a connection for this port sso I plugged it with the plastic bolt that K&N provided. Now that i see yours, I wonder, does the 3.5 have this sensor? Mine seems to run fine without it... BUT when it kicks in to the passing gear, it is very loud and I notice a resonance vibration of sorts. Is this normal?

Thanks,
Chris

Chris,

Your setup is fine. The noise is normal. The stock air box along with the resonators kept the noise in pretty well.

H3.007
05-16-2006, 03:07 AM
Hi Badger,

Thanks for the confirmation on my install. How about that tube sticking out of the front of yours. Is it plugged or did you have to hook it up?

Also, does anyone have any home remedies to decrease the resonance?

Thanks,
Chris

RubHer Yellow Ducky
05-16-2006, 09:55 AM
http://www.elcovaforums.com/forums/images/avatars/23.jpg (http://www.elcovaforums.com/forums/member.php?u=3036)hmrlvr (http://www.elcovaforums.com/forums/member.php?u=3036) http://www.elcovaforums.com/forums/images/statusicon/user_offline.gif vbmenu_register("postmenu_107117", true);
Hummer Expert
Join Date: Aug 2005
Location: Redondo Beach CA
Posts: 656
http://www.elcovaforums.com/forums/images/reputation/reputation_balance.gif


http://www.elcovaforums.com/forums/images/icons/icon1.gif
flyingbadger, is there a cover for the K&N aircharger you installed? I saw a Volant on another thread with a cover. Apparently the cover will force the system to pull cool air from outside the vehicle instead of warm air from under the hood. I know you have a K&N but will the cooler air increase the HP more than the warmer air? Anyone have any feedback please let me know. I'm ready to order one of them and am trying to decide. Thanks

PLEASE answer a question for me (this is to all who converted air intake systems)
The factory system that comes with the H-3 already draws cool air from the right fender area, NOT FROM UNDER THE HOOD. In what way, how, explain, is the effect of the other systems besides leaving your wallet $150 to $350 dollars thinner? I'm not interested in the sound that it makes but do you get a HP gain? If you do , HOW?

RYD

H3.007
05-16-2006, 01:23 PM
Hey Ducky,

There isn't a cover for the K&N that I am aware of. I think the principle is that it allows more air flow as opposed to the more restrictive factory setup. I am not sur ehow the Volant system works but it appears to feed from the factory air inlet. if this is the case, the Volant is still a restircted airflow - but I could be wrong as I have the K&N.

I did have some concern about the amount of hot air that could get into the filter over the K&N shield wall. However, it only make sense that when the vehicle is moving, the majority of the hot air will be pushed backward, away from the filter and out of the engine compartment through void venting and the such. However, I did take the precaution of buying pipe insulation (used in home plumbing applications- about $4 for a large package) and I lined the entire shield with it. The insulation is presplit and I used strips of black duck tape for further insurance against the insulation coming loose and landing on something hot or getting caught in a pully. I also figure that this will further dampen the resonance and any vibrations that may occurr.

Also, I can not tell you the specific horsepower increase but damn does it get to 80 MPH a lot quicker than it did. Mid range response is also quicker and it certainly has more power in the high end. The only downer is, again, the resonance noise when you hit the upper end. I am workign on some ideas to reduce that without ending up back to square one so I will post the results if my idea(s) are succesful. It also appears that my GPM has increased but I won't know until I hit the half-tank mark.

Hope this helps!
Chris

BB
05-16-2006, 02:32 PM
flyingbadger, it looks like coolant is leaking from the radiator pressure cap. Recently, I noticed the same thing with my H3, but not that much. Does anyone have the same trouble ? and does anyone know what's wrong with ?


http://www.paw.hi-ho.ne.jp/hummerh3/p_013.jpg

ChevyHighPerformance
05-16-2006, 08:57 PM
flyingbadger, it looks like coolant is leaking from the radiator pressure cap. Recently, I noticed the same thing with my H3, but not that much. Does anyone have the same trouble ? and does anyone know what's wrong with ?


http://www.paw.hi-ho.ne.jp/hummerh3/p_013.jpg

I just noticed mine, yesterday. There wasn't much though.

ChevyHighPerformance
05-16-2006, 09:05 PM
Hey Ducky,

There isn't a cover for the K&N that I am aware of. I think the principle is that it allows more air flow as opposed to the more restrictive factory setup. I am not sur ehow the Volant system works but it appears to feed from the factory air inlet. if this is the case, the Volant is still a restircted airflow - but I could be wrong as I have the K&N.

I did have some concern about the amount of hot air that could get into the filter over the K&N shield wall. However, it only make sense that when the vehicle is moving, the majority of the hot air will be pushed backward, away from the filter and out of the engine compartment through void venting and the such. However, I did take the precaution of buying pipe insulation (used in home plumbing applications- about $4 for a large package) and I lined the entire shield with it. The insulation is presplit and I used strips of black duck tape for further insurance against the insulation coming loose and landing on something hot or getting caught in a pully. I also figure that this will further dampen the resonance and any vibrations that may occurr.

Also, I can not tell you the specific horsepower increase but damn does it get to 80 MPH a lot quicker than it did. Mid range response is also quicker and it certainly has more power in the high end. The only downer is, again, the resonance noise when you hit the upper end. I am workign on some ideas to reduce that without ending up back to square one so I will post the results if my idea(s) are succesful. It also appears that my GPM has increased but I won't know until I hit the half-tank mark.

Hope this helps!
Chris

WhiteH3 posted some dyno sheets a while ago for his K&N. I think his was one of the first and was tested by K&N. From memory, his increase was about 18ish HP in 3rd gear at the wheels. The only mod was an exhaust (Magnaflow perhaps).

RubHer Yellow Ducky
05-16-2006, 11:02 PM
WhiteH3 posted some dyno sheets a while ago for his K&N. I think his was one of the first and was tested by K&N. From memory, his increase was about 18ish HP in 3rd gear at the wheels. The only mod was an exhaust (Magnaflow perhaps).

THE ONLY MOD WAS A PERFORMANCE EXHAUST...

AH! that only mod is a BIG mod.
as i read over this posts you all are assuming the aftermarket (k&n, others) increase HP by possibly vortexing the air, and / or cooling the air, YES???

As I read the lit on the k&n and others they take about the cooler air they are allowing into the system, unlike the factory system. Again the H-3 uses cooler air so please inform me again what i am missing...
THANKS

RYD

Wisha Haddan H3
05-17-2006, 08:03 PM
Ducky. You’re right about the H3. It already pulls in cool air from the outside. But the K&N and Volant intake systems don’t provide a swirling effect and don’t actively cool the air. They only provide these benefits.

1. The oiled cotton filter element is less restrictive than the OEM dry paper element. The element is also shaped as a 360 degree conical filter for smoother and more uniform airflow into the intake tube (square intake filters can create eddies).

2. The intake tubes are optimized for maximum airflow. They are mandrel bent to maintain uniform tube diameter. This helps prevent unintended pressure waves that could impede airflow. Also, based on extensive testing, the diameter and length of the intake tube is designed to optimize air velocity and pressure waves.

3. The filter elements are enclosed to separate them from engine heat. The stock airbox already does this, but many aftermarket systems omit the enclosure to save money.

4. The filters are washable and reusable (when properly re-oiled)

Stay away from cheap shiny systems with open elements. They can actually rob you of power.

Wisha Haddan H3
05-17-2006, 08:23 PM
There are also disadvantages to using an oiled cotton filter element.

1. They don't filter as well as a dry paper element until they collect a little dirt ... even then, they allow more fine particles into your engine than paper.
2. They must be cleaned gently before reuse, or you can damage the filter material.
3. When re-oiling the filter, adding too little oil compromises filtration. Adding too much oil can damage your MAF sensor.
4. They're noisier than the stock system.

Although it's a fact that wet filters allow greater airflow, there's some debate about how much air a non-turbo, non-s/c engine needs, as well as the location in the powerband where the advantage occurs compared to where the power is needed.

Here's a technical report comparing wet and dry air filters http://home.usadatanet.net/~jbplock/ISO5011/SPICER.htm (http://home.usadatanet.net/%7Ejbplock/ISO5011/SPICER.htm)

Here's a link to a high-flow dry filter system that I'm researching. Supposedly it has all the advantages of the oiled filter and fewer of the disadvantages. http://trucks.aempower.com/