2003 H2 door height

[Rosetti21]

Does anyone know the exact specs on the factory door height. I had a lift put on and want to make sur I pass the NJ state inspection.

[Rosetti21]

Does anyone know the exact specs on the factory door height. I had a lift put on and want to make sur I pass the NJ state inspection.

[PARAGON]

First, can't you measure it and second, it's a little too late to be worrying about that now.

[Frank2005]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by PARAGON:
First, can't you measure it and second, it's a little too late to be worrying about that now. </div></BLOCKQUOTE>

http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
Well Smarty Jones no I cant measure it now because its lifted, and I do not have another H2 in my driveway. And second its not to late because I can put the stock tires on if I need to. I could also just buy a sticker, but I wanted to pass the High Rise vehicle inspection in NJ.

Oh and Paragon I joined this forum to exchange ideas and infromation. Why do you have to be so arrogant, if you don't know the answer, then dont respond, if you do then share the info. Isn't that one of the purposes of a forum. It is ignorant people like yourself who ruin these sites. I just joined today, thanks for the warm welcome. Looks like i met my first *******! </div></BLOCKQUOTE>Take a look at your post and try again dumbass.

[Rosetti21]

Yea I looked at it, I dont know what your problem is.

John@HGW I just saw you were on here, if you read this, email me the door height if you know it. I met some jerk on here, you probably know him but he is pretty rude and uninformative.
I cant wait til my Super Charger comes in next week. I never got your email last night on the arms and the cross drilled intalled. I will give you a call on your cell today to remind you, I know your swamped. If I dont, call me when that stabilizer comes in. RR

[DDWH]

Nice rig Rosetti....How much did you snag it for off of ebay?

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
Yea I looked at it, I dont know what your problem is.

</div></BLOCKQUOTE>
Your lazy question. What exactly does the "factory door height" have to do with state inspection? Did you chop your top and lower the roof line?

If you wanted to know what the distance from the ground the door sill is for a factory H2, you should have asked for that. Instead you asked for the "factory door height." Get it now, Smarty Jones. http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif

[Rosetti21]

Lets start over Paragon, I am sorry for the "Lazy Question" but when I called DMVNJ special inspections this morning, thats what they asked me? Being a new H2 owner and not wanting to bother Shumacher at HGW for another question, I just figured one of you guys could help me out. They told me not more than 4 inches over. I think I am way over that. Do you have any suggestions on what to do for inspection?
Again sorry for not stating my ???? correctly, but give me a day or two i am new to this site. Thanks in advance for any help you could offer. Ryan

I grabbed it for 42k, do you think thats about right?

[DDWH]

I don't remember the exact specs and mods. Just remember seeing it on ebay a few times and thinking it was pretty nice and had some nice mods!

[PARAGON]

Excuse me for being a wee bit skeptical but you said "I had a lift put on" and you don't have any Hummer H2 purchases on your Ebay account. A lot of shoe sales, but no H2s.

[Rosetti21]

the lift wasnt purchased on ebay, shumacher at hgw did the lift, why are looking at my ebay account? What is your deal thats creepy

[HummerNewbie]

You can't be more than 4"s above stock? Man, that sucks. Your lift looks like blows that spec away by a couple of inches, then add the increased height due to the tires. Sorry, don't have an answer to your questions, but couldn't you figure the numbers by adding a few numbers. First, measure the height of the new tires. Don't know what they are but lets say it is 37"s versus the 35"s that come stock. Take that one inch of vehicle height increase then add the size of the lift. Looks like a 6" lift plus the 1" increase from the tires gives you 7"s over stock. Someone correct me if I am wrong here. Looks good though.

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
the lift wasnt purchased on ebay, shumacher at hgw did the lift, why are looking at my ebay account? What is your deal thats creepy </div></BLOCKQUOTE>Why did you remove the picture that was from Ebay and had the lift?

[Rosetti21]

because i dont want people like you looking into my business

[Rosetti21]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by HummerNewbie:
You can't be more than 4"s above stock? Man, that sucks. Your lift looks like blows that spec away by a couple of inches, then add the increased height due to the tires. Sorry, don't have an answer to your questions, but couldn't you figure the numbers by adding a few numbers. First, measure the height of the new tires. Don't know what they are but lets say it is 37"s versus the 35"s that come stock. Take that one inch of vehicle height increase then add the size of the lift. Looks like a 6" lift plus the 1" increase from the tires gives you 7"s over stock. Someone correct me if I am wrong here. Looks good though. </div></BLOCKQUOTE>


Thanks I will do that!!!

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
because i dont want people like you looking into my business </div></BLOCKQUOTE>You don't want people seeing that you are lying.

Don't worry, I got your back.

[Rosetti21]

lying about what? Are you ****in crazy

[DRTYFN]

http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[Rosetti21]

Thats a good lookin h2 paradick oh thats mine

[Rosetti21]

8,500 posts for you paradick, wow you have no life

[Rosetti21]

Lying about what paradick?????????????????????????????????????????? ????????????????????????????????????????????

[Rosetti21]

where you at paradick????????
Lying about what

[Rosetti21]

You are a tool

[ZigsRig]

Damn Paragon, you have a troll sniffin nose like no other... though i dont think this one will be as fun as the last pair http://www.elcova.com/infopop/emoticons/icon_smile.gif

[Kevin B]

I don't understand why everyone is so quick to jump on people (and newbies). It was much more fun,back in the day, when they were given time and enough rope to hang themselves http://www.elcova.com/infopop/emoticons/icon_wink.gif.

[Rosetti21]

Would you like me to take a picture of it for you ?????

[Kevin B]

Roseetti, don't take this wrong, just take it as good advice. You might wan't to back away from the post button for a while.

[ZigsRig]

Let me help ya...

LINK TO ROSETTI'S TRUCK (http://www.oprah.com)

Better?

[Rosetti21]

I will, I wont ever post again, but this started because I asked a simple question. I hate when the know it alls get satisfaction out of belittling a newbie. If you dont want people to join, make it a private forum.
I thought it was public and you could exchange ideas and ask for advice.
I bought the truck two weeks ago from I guy I met online, I was introduced to John at Hummers Gone Wild who is doing my SC for me and he did the lift for the previous owner. I was at his shop last week and he wnt over my truck, the only thing we did not discuss was my inspection, so I thought I could ask one of you guys. Now I am a troll, a jerk , for what ? Why? Like I said make it a private forum if you are going to have people on here ripping newbies instead of giving them sound advise. It just doesnt make sense.

[ZigsRig]

Isnt the truth fun

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
I had a lift put on </div></BLOCKQUOTE>
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"><span class="ev_code_RED">Originally posted by PARAGON:
you said "I had a lift put on" and you don't have any Hummer H2 purchases on your Ebay account</span> </div></BLOCKQUOTE>
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
the lift wasnt purchased on ebay, shumacher at hgw did the lift </div></BLOCKQUOTE>
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
I bought the truck two weeks ago from I guy I met online, I was introduced to John at Hummers Gone Wild who is doing my SC for me and he did the lift for the previous owner </div></BLOCKQUOTE>

[Kevin B]

Rosetti, there's alot of help available here so dont give an ultimatum.

BTW those seem like pretty big tires (38x15.5). Did you, or they, upgrade the spindles?? Do they rub??

How did you get a 16.5 inch rim w/o spacing the rim out? seems like to me they would hit the caliper.

[Boss Hoss]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by ZigsRig:
Let me help ya...

LINK TO ROSETTI'S TRUCK (http://www.meatspin.com) <span class="ev_code_RED"><------***NOT WORK SAFE***</span> </div></BLOCKQUOTE>


You guys crack me up. Rosetti im sure your on the up and up but sometimes this is the initation period. Sit back and relax a bit and youll find the board quite informative and entertaining.

[Rosetti21]

I didnt feel the need to go on for my first post and say" I bought this truck and it has a lift done by the previous owner and I have a question about door height" It just seemed easier to say I put a lift on and I have a ??? Seriously what difference does it make which owner paid for the lift. If you didnt rip me on my first post ex. "too late now" then this would not be going on

[Rosetti21]

I guess I am not, I will just sit back and take it like that fag in the movie-- but seriously can anyon help me with the inspection

[Kevin B]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">I will just sit back and take it like that fag in the movie-- </div></BLOCKQUOTE>


Now that right there's funny http://www.elcova.com/infopop/emoticons/icon_biggrin.gif.

Sorry, I cant help you with the inspection. Things are different here in CA.

[Boss Hoss]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">I didnt feel the need to go on for my first post and say" I bought this truck and it has a lift done by the previous owner and I have a question about door height" It just seemed easier to say I put a lift on and I have a ??? Seriously what difference </div></BLOCKQUOTE>

It doesnt matter but i would urge you to be forth coming. If you are not it will eventually come out and will ruin credibility. As people really dont know you truth and honesty is all they have to go on. You must remember this is an internet relationship and there are many trolls(dishonest/decieving) people. Anyway, lesson learned now sit back and enjoy the forum.


<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
I guess I am not, I will just sit back and take it like that fag in the movie-- but seriously can anyon help me with the inspection </div></BLOCKQUOTE>

lol, blending in already.

[Rosetti21]

I dont know about the spindles, HGW did the work on it. When I reverse and turn, it rubs a little but that is the only time. I dont know about the 16.5 either but I will ask John

[HummerNewbie]

Just a little observation regarding your first post. You have to understand that a lot of trolls come through here and claim to have Hummers when they don't. You come in and post a picture of your new H2 that from my understanding was on Ebay with the lift installed. Many users of this forum watch what Hummers go up for sale on Ebay. If the H2 was seen on Ebay for sale with the lift on it already yet you stated you put it on, you sound like a troll. Don't think that was your intent but hope this sheds some light on it for you.

[Rosetti21]

Alright I will advise for the future- but I feel like such a dick now- I guess thats the whole point

[Rosetti21]

I am gonna take a few of my own pics later and post, so you know I am not what you call a troll.

But I do feel better now thanks for shedding a bit of light-

[Kevin B]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">but I feel like such a dick now- </div></BLOCKQUOTE>

That most likely has something to do with the disgusting link to the porno site http://www.elcova.com/infopop/emoticons/icon_eek.gif http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif .

*BTW a GRAPHIC warning would be nice*

[Bo Bo]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
Does anyone know the exact specs on the factory door height. I had a lift put on and want to make sur I pass the NJ state inspection. </div></BLOCKQUOTE>

And peopl call me a retard? You beat me.

[Rosetti21]

guess so

[TXSUT]

As for the vehicle inspection, run out into the country and get a redneck to do it. Or, find someone who knows the owner of an inpsection station and get a "hook up." Seriously, I'm not $hitting you.

[KenP]

Just a few minutes online gave me this info:
http://members.aol.com/snowman629/truck/liftlaws.htm

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> http://members.aol.com/snowman629/truck/NJDMV.jpg

LIFT LAWS

04/13/99

An examination of your vehicle indicates that it has been raised more than 4 inches beyond its manufactured height. Under the provisions of N.J.A.C. 13:20-37.3, such a vehicle must undergo a geometric stability test.
These tests are being conducted by appointment only at specialty inspection locations. A comprehensive examination of the steering and suspension will be conducted. There is no charge for this inspection. Please call the location of your choice as soon as possible, since the test must be completed prior to the expiration date of your inspection sticker.

Conditions for the motor vehicles with elevated chassis heights are:

(1) Steering gear ratios and steering wheel left stop to right stop turns must be within 1/2 turn of the original manufacturers specifications.

(2) Headlights shall be mounted no lower than 22" nor more than 54" above the ground.

(3) Taillights shall be mounted no lower than 15" nor more than 72" above the ground.

(4) Off road lights must be covered while operating on public roads.

(5) License plates must be mounted no less than 12" nor more than 48" above the ground.

(6) Brake lines and hoses must be protected from excess heat and vibration. They must be mounted in a manner to prevent chafing, undue wear, stress, or unintentional disconnection.

(7) Vehicles originally equipped with bumpers must have them securely fastened, no less then 16" from the ground to the bottom of the bumper, and shall extend the full width of the vehicle.

(8) Maximum tire diameter allowed will be 38" or 6" over stock, whichever is less.

(9) All tires must be the same size. Maximum tire pressure as stated on tire is recommended. Front tires must be at least 60% of the thread width of the rear tires.

(10) Front fenders must extend over the full width of the tire thread. Rear tires that are not covered by the fender or other body parts must be equipped with metal protectors or flexible flaps that prevent dirt, debris and water from being thrown.

(11) Exposed fuel tanks must be encased. Side mounted tanks must have a protective bar to prevent rupture.

(12) Exposed exhaust system components and moving parts must be shielded.

(13) Ballast must be securely mounted.

(14) Releasing the steering wheel in a sharp turn shall result in an increase in turning radius.

(15) Spacers to increase track width are prohibited.

(16) Maximum lift heights for GVWR 4500 lbs and under... 7" above original vehicle height.

(17) Maximum lift heights for GVWR 4501 - 7500 lbs... 9" above original vehicle height.

(18) Maximum lift heights for GVWR 7501 - 10,000 lbs... 11" above original vehicle height.

(19) No blocks are allowed on the front suspension.

(20) All credentials are to be up to date.

(21) Please report to the Supervisor’s Office at least 10 minutes prior to your appointment. Lateness will result in cancellation of the scheduled appointment. Do not wait in the inspection line. Stability tests are not given in inclement weather. Please call the station if questionable.

Please Note: Vehicles that have been previously approved prior to October 1, 1998 are exempt from lift restrictions. However, all other regulations must be complied with by February 1, 1999 except limitations on tire diameter which must be complied with by October 1, 2000.


Vehicles Certified Prior to 10/1/98


All vehicles tested and approved prior to October 1, 1998 will have until October 1, 2000 to comply with the tire diameter requirements. While all vehicles approved prior to October 1, 1998 will be exempt from the maximum lift requirements, once the vehicle is retrofitted to comply with the new tire regulations, a new stability test will be required.
Effective October 1, 2000, maximum tire diameter will be no more than six (6) inches larger than the stock tire available from the manufacturer ( for that model and model year ) or thirty-eight inch diameter, whichever is LESS. </div></BLOCKQUOTE>

[HummerNewbie]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TXSUT:
As for the vehicle inspection, run out into the country and get a redneck to do it. Or, find someone who knows the owner of an inpsection station and get a "hook up." Seriously, I'm not $hitting you. </div></BLOCKQUOTE>

Very true. Used to know the owner of the shop that did inspections for us on our company vehicles in MO. He did several inspections for lifted trucks we had that would not pass due to height but we were good to go.

[KenP]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
8,500 posts for you paradick, wow you have no life </div></BLOCKQUOTE>
What a looser. Only 8,500 posts http://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>X2brazillion!

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
8,500 posts for you paradick, wow you have no life </div></BLOCKQUOTE>
What a looser. Only 8,500 posts http://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>How the hell did you get so far ahead of me?

[ZigsRig]

<font size=20> <marquee>PAD</marquee></font>

[HummBob]

[QUOTE]Originally posted by Rosetti21:
Does anyone know the exact specs on the factory door height.QUOTE]

Nope http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[KenP]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Rosetti21:
8,500 posts for you paradick, wow you have no life </div></BLOCKQUOTE>
What a looser. Only 8,500 posts http://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>X2brazillion! </div></BLOCKQUOTE>
12,700 post for you Ken, wow you have no life http://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>So.

[DDWH]

Damn I forgot what the topic was after reading through Ken's 12,755 posts http://www.elcova.com/infopop/emoticons/icon_eek.gif

[KenP]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by DDWH:
Damn I forgot what the topic was after reading through Ken's 12,755 posts http://www.elcova.com/infopop/emoticons/icon_eek.gif </div></BLOCKQUOTE>Did your brain just fall out of your head? http://www.elcova.com/infopop/emoticons/icon_eek.gif

[Spike]

originally posted by Kevin B,
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">*BTW a GRAPHIC warning would be nice* </div></BLOCKQUOTE>

That would ruin the effect. The whole idea of "the meat spin" is to shock and surprise! It's a f$ckin Elcova Classic!!! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[Spike]

originally posted by PhilD,
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">That will fail you right there, if they stick by it anyway. </div></BLOCKQUOTE>
The motor vehicle inspectors in NJ are like the Nazi's. I think they get paid commissions on every car they fail! http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif

[Kevin B]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">It's a f$ckin Elcova Classic!!! Big Grin </div></BLOCKQUOTE>


I guess I missed that but then again im kinda a newbie http://www.elcova.com/infopop/emoticons/icon_razz.gif.

[Spike]

originally posted by Kevin B,
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> I guess I missed that </div></BLOCKQUOTE>
It was filmed live in Moab last year!! http://www.elcova.com/infopop/emoticons/icon_eek.gif http://www.elcova.com/infopop/emoticons/icon_eek.gif http://www.elcova.com/infopop/emoticons/icon_eek.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[Kevin B]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">It was filmed live in Moab last year!! </div></BLOCKQUOTE>
http://www.elcova.com/infopop/emoticons/icon_eek.gif Im glad I missed that http://www.elcova.com/infopop/emoticons/icon_eek.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif.

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Kevin B:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">It was filmed live in Moab last year!! </div></BLOCKQUOTE>
http://www.elcova.com/infopop/emoticons/icon_eek.gif Im glad I missed that http://www.elcova.com/infopop/emoticons/icon_eek.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif. </div></BLOCKQUOTE>
So am I http://www.elcova.com/infopop/emoticons/icon_eek.gif

Who's room was that in? </div></BLOCKQUOTE>Is that why Adam had a broke rear end?

[NJ H2]

I had a little wheelin toy with a lift and had to run it thru the stability test in Forked River, NJ
If this passed I'm sure you will also. Although, I was freakin a little when they tilted it, http://www.elcova.com/infopop/emoticons/icon_eek.gif but it passed. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif You get a certificate and need to keep it with you to show the Coppers when they pull you over. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

http://photos.imageevent.com/benza/corvettez06/websize/scan0002.jpg

[Dan]

I knew you were an ex-redneck! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[devilsfan]

I say screw the inspection and move to a REAL state. http://www.elcova.com/infopop/emoticons/icon_wink.gif

Stacy

[NJ H2]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dan:
I knew you were an ex-redneck! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>

LMAO! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif
I can't be a redneck! I tried to join the NJ chapter but since I grew up in NYC I was banned!
Maybe I should try the CT chapter, I know I have an "in" there! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[HGW]

I just scrape my old inspection stickers off in NJ. The cops only seem to look for the expired ones and miss the fact that I have none.

I do want to try the stablitiy test though when I get a break--woould love to see if they pass.