Stone Guards on my Fogs

[StarsnBars]

Did alittle mod on my fog lights. They are 6 inch slimlight guards I cut down to fit. Cant believe the fit ,,they wedged in between the bumper and light lens. Be interesting to see if they stay, but there real tight in there. Thinking about moving the square bumper guard lights up to my roof rack and getting round 6 inch slim lites on the guard. Square and round together in the same area kinda brings da suk.:cool: Now I guess Ill wait and see if they melt.:rolleyes: Notice the crowning on the tires due to the 35's. Want new rims bad.Must have,, need now !!

[HummerNewbie]

Lookin good :cool:

[Sewie]

That look sweet! Good job. :cool:

[The Green Lantern]

Hey, I wanna do that, looks nice! I have to find something similar without the big "KC" logo, not a big fan of advertizing logos. :D

[StarsnBars]

Hey GL Here's some logo free guards. I had to cut almost all of mine to fit. They pretty much looked like these before I started.. http://www.teakatoys.com/Hummer_H1_600H_Series_Stone_Guards_by_Delta_p/del-04-6029-08.htm

[The Green Lantern]

Sweet, thanks!

[StarsnBars]

I just inserted them thru the front. When I was snipping the plastic I did just alittle at a time so I would have enough of the bars to wedge between bumper and lens. i ended up just leaveing a couple of them just alittle long so they could have more to bite , if that makes any since. I drove it and one of the two is alittle loose, so Im going to take them back out (easy) and put a couple of little pieces of 3M tape on a couple of key areas to hold them down alittle better. See ya Nascar, By the way, your rig looks GREAT :)

[Rick]

Cool idea! I ordered the 40 mil plastic film that adheres to the front of the headlights, turn-signals and fog lights. I have the same thing on my other cars and it works great. Rocks, brush and trail debris won't crack your lenses.

[DDWH]

Did alittle mod on my fog lights. They are 6 inch slimlight guards I cut down to fit. Cant believe the fit ,,they wedged in between the bumper and light lens. Be interesting to see if they stay, but there real tight in there. Thinking about moving the square bumper guard lights up to my roof rack and getting round 6 inch slim lites on the guard. Square and round together in the same area kinda brings da suk.:cool: Now I guess Ill wait and see if they melt.:rolleyes: Notice the crowning on the tires due to the 35's. Want new rims bad.Must have,, need now !!

That looks great! Sweet mod:cool:

[ictH3]

Did alittle mod on my fog lights. They are 6 inch slimlight guards I cut down to fit. Cant believe the fit ,,they wedged in between the bumper and light lens. Be interesting to see if they stay, but there real tight in there. Thinking about moving the square bumper guard lights up to my roof rack and getting round 6 inch slim lites on the guard. Square and round together in the same area kinda brings da suk.:cool: Now I guess Ill wait and see if they melt.:rolleyes: Notice the crowning on the tires due to the 35's. Want new rims bad.Must have,, need now !!

Hey.... that's the tag I was going to get for my H3!
WOW... Small world!

Nice guards too!

[fourfourto]

I just got in some PIAA covers for the 540 lights.
Going to do the same thing S&B did with the KC's.
Hopefull I will install by the weekend.:D

[StarsnBars]

There holding up well, Take your time trimming them and they will stay in place rather nicely. Post a pic or two Four when you get them in. See ya:)

[fourfourto]

I cut the grill off the cover I used a dremel (light duty one) took about a hour.It would have been easyer and quicker if I had a more powerfull dremel.

I used 4 small pieces of outdoor 3M tape on corners to make sure it doesnt move.
(it snaps in there tight.)

[fourfourto]

Front view

[fourfourto]

Close up.
Thanks for the GR8 idea S&B :D :excited:

[HummerNewbie]

Those look great :perfect10s:

[DDWH]

Those look great :perfect10s:

:iagree: very nice!

[fourfourto]

I wanted a different look without spending $250.00 on new lights.
Very happy with the look of the guards.:jump:

I like the PIAA logo ,I did buy carbon fiber silicone wiper blades made by PIAA for the front wipers(2 -17 inch fit fine no issues) there
not available in carbon fiber for the back, i used regular PIAA's 12 inch.


My option B was no logo using a speaker cover and cutting it down.
Might be a good Idea for the green lantern or others who dont want the logo.
Link below.

http://cgi.ebay.com/2-8-SUBWOOFER-SPEAKER-GRILL-COVER-Brackets-Screws_W0QQitemZ330022251139QQihZ014QQcategoryZ677 73QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Klint]

I love it Looks great guys! :jump:

[wpage]

You got to be kidding me:lame:

[wpage]

You could buy better and more economically oem. Why advertise PIAA? Status.

[fourfourto]

You could buy better and more economically oem. Why advertise PIAA? Status.


Oem covers are close to $200.00. Hows that more economical :confused:



status ...:twak:

[JohPol]

Where did you find the grills?

[fourfourto]

Where did you find the grills?

I got them on ebay for $26.00 for the set.Ebay sometimes have them listed keep checking(the guy I bought them from only had the one set).
Make sure there for the 540 they cutdown just right and fit tight. :D

Local stores have them for about $20.00 each Keep a eye out on ebay for a deal.

I looked around for a 5 inch cover to fit there are none.(just oem chrome ones )
You can probobly customize any 6 inch cover.

[JohPol]

Thanks. I have a set of 540s I took off my last truck. Just didn't want to cut them up.