37" COOPER STT's Installed!!!!

[Alan06SUT]

These tires are cool. No issues so far. On the highway they make a slight hum, but its noting that a little radio volume wont take care of, they dont wander any more than the BFG's do. Only rubbing is when I turn 100% to the left. It is a very slight rub though and I probably wouldnt have noticed it if I didnt hear they rubber on here. It lifted my truck a full 2" and I had to adjust my mirrors. Awsome....Now, I have to test them offraod...
http://www.imageviper.com/displayimage/54779/0/DSC02351_(Medium).JPG
http://www.imageviper.com/displayimage/54780/0/DSC02357_(Medium).JPG
http://www.imageviper.com/displayimage/54781/0/DSC02359_(Medium).JPG
http://www.imageviper.com/displayimage/54782/0/DSC02362_(Medium).JPG

[Alan06SUT]

The last one shows the clearance in the rear. I dont see how it will break the sensor??? I'll get a better pic later, showing the sensor.
Here's one more from the front:

http://www.imageviper.com/displayimage/54783/0/DSC02356_(Medium).JPG

[lotus4s]

Looks great Alan, you will be pleased when you get them offroad.:perfect10s:


Btw, are you at the mall? :jump:

[GLBLWARMR]

I had Cooper tires on some of my other trucks and I loved 'em. Truck looks great.

[MarineHawk]

Alan, you'll love them, especially off road. At about 50 psi, they are also great on the highway.

[HummBob]

Very SWEET!!!:perfect10s: :perfect10s: :perfect10s:

[Alan06SUT]

Thanks. I do love them. Make the hummer feel "right". Cant wait to get them dirty.

[zeros]

i love the tires.. how much did you pay for them? also did you paint your wheels yourself or have them powder coated? truck looks great!

[Alan06SUT]

i love the tires.. how much did you pay for them? also did you paint your wheels yourself or have them powder coated? truck looks great!

Thanks. I believe they were around $1600 out the door with full replacement on all five tires no questions asked until 1/2 tread. I belive this was an additional $40/tire. I think the per tire price was about $269 or so. Only negative is added road noise above 60 mph.

I had the wheels powder coated for around $60.00 ea. The tires on the wheels have to be removewd as the powder coating is baked on and this would melt the tires.

[Alan06SUT]

I dont know what happened over there at image viper. Here they are again...

http://i68.photobucket.com/albums/i16/acablik/DSC02362Medium.jpg
http://i68.photobucket.com/albums/i16/acablik/DSC02374Medium.jpg
http://i68.photobucket.com/albums/i16/acablik/DSC02356Medium-1.jpg
http://i68.photobucket.com/albums/i16/acablik/DSC02351Medium.jpg

[frenzy1]

Lookin' good man !:beerchug: :cool:

[KenP]

Alan... uh.... is that ArmourAll....???

[zeros]

i love these tires would these still work if i ended up getting a 6" suspension lift later? i was thinking of getting a fabtech lift and going with these tires and wheels would that work ok? thanks

[Alan06SUT]

Alan... uh.... is that ArmourAll....???

Nope. Just the Natural Sheen!:D Its purpose is to shed mud!:D

[Alan06SUT]

i love these tires would these still work if i ended up getting a 6" suspension lift later? i was thinking of getting a fabtech lift and going with these tires and wheels would that work ok? thanks

I dont have a lift but I'm sure that a tire that will work on a stock height vehicle will work on a lifted truck. I belive most of the guys w/ 6" Fabtech run 38's.

[zeros]

hi i was interested in getting the same tires. what are the exact numbers for the tire that would work on the stock wheels. for the 37 " thanks!

[timgco]

hi i was interested in getting the same tires. what are the exact numbers for the tire that would work on the stock wheels. for the 37 " thanks!

should be 37 12.50 17

[zeros]

thanks what i thought thanks!

[Alan06SUT]

Yep 37 x 12.50 x 17 Cooper STT.

[MarineHawk]

The last one shows the clearance in the rear. I dont see how it will break the sensor??? I'll get a better pic later, showing the sensor.

Promises, promises. ;)

[zeros]

i was trying to find these tires. it looks like yours dont have the white lettering on either side.? the only ones i could find have white letting on one side. or did you just paint the letters? thanks

[Alan06SUT]

i was trying to find these tires. it looks like yours dont have the white lettering on either side.? the only ones i could find have white letting on one side. or did you just paint the letters? thanks

Minem have the white on the inside. They get dirty quick and they appear black. They are fine if you put them on the inside. You wont see any white.

[Mr. I - Man]

i was trying to find these tires. it looks like yours dont have the white lettering on either side.? the only ones i could find have white letting on one side. or did you just paint the letters? thanks

Dremel tool works to take off white lettering just dont go too deep.

[zeros]

[quote=Alan06SUT]Minem have the white on the inside. They get dirty quick and they appear black. They are fine if you put them on the inside. You wont see any white.[/

ok cool... did you ever get a picture showing how close they come to your air ride sensor? have you had any problems with that?

[Alan06SUT]

[quote=Alan06SUT]Minem have the white on the inside. They get dirty quick and they appear black. They are fine if you put them on the inside. You wont see any white.[/

ok cool... did you ever get a picture showing how close they come to your air ride sensor? have you had any problems with that?

No and No, I'll try to remember to get a pick. I have not done seroius rocks yet with the new tires though.

[wpage]

Nice overall look. Great job!:perfect10s: