Rear Storage Box Done!!!

[SR1355]

Built a storage drawer system for the rear cargo area. Here are some pics and details. Turned out great, the trays are a tight fit allowing for them to be pulled out just like a drawer.

This is pic of empty cargo area:

[SR1355]

Here is pic of tubs that I used:

[SR1355]

Heres cut parts:

[SR1355]

Here's box partly assembled:

[SR1355]

Test fit of box:

[SR1355]

Here's box painted with center divider:

[SR1355]

Here's box top with stall mat on top:

[SR1355]

Close up of stall mat and hold down:

[SR1355]

Here's thi finished project:

[SR1355]

One more:

[SR1355]

Another:

[SR1355]

I had less than $100 into project and about three hours labor. Great storage for tools and what not. The wife saw it and said that would work great for vegetables and bread.... WTF.

One final shot from passenger compartment.

[H3PAC]

:perfect10s:

Nice job! I like it....vegetables and bread? :giggling: They just don't understand, do they.

[Desert Dan]

Nice job!
Great solution

Did you bolt it into the stock tie down locations?
Do you have the dimensions/plans of the box.
Is it pretty level with the back seat?

You can even mix some cement in the drawers if you have too:)

[Mark805]

THAT looks great!

:excited: :excited: :excited: :excited:

[SR1355]

Nice job!
Great solution

Did you bolt it into the stock tie down locations?
Do you have the dimensions/plans of the box.
Is it pretty level with the back seat?

You can even mix some cement in the drawers if you have too:)

Yes it is bolted into stock location for tie downs. I used 10mmX70mm 1.5 bolts to bolt it down.

The box is 30x40 outside dimensions, the top is 30x42 1/4 to extend all the way to rear quarter panels. I have 6" clear hgt in box for trays. I haven;t checked to see how it lines up with rear seats down.

[R6realtor]

Good job man, looks great:cool:

[garnerbiker]

I would like to see a pic with the seats folded down too.


LOOKIN GOOD!

[raptorman53]

Great Job:beerchug: Where did you get the rubber mat?

[frenzy1]

Very nice custom work man !! Congrats !!!

[SR1355]

I got the rubber mat at Tractor Supply, it was a 4x6 stall mat that I cut to size.

[wpage]

Good Craftmanship!

[Crash ?]

That's pretty cool... About the only suggestion I'd make is wrapping the end cuts with black vinyl just to make it looked more finished.. Rattlecan on plywood just looks like.. Well.. Rattle can on plywood

Not that you could tell either way when the door is closed..

Do the tubs fill the entire depth of the shelf or is there even more room behind them to hide more stuff..??

Rob

[HummBebe]

A clean tow strap.....tsk tsk.:giggling:

[Wisha Haddan H3]

very nice. clean build :perfect10s:

[SR1355]

That's pretty cool... About the only suggestion I'd make is wrapping the end cuts with black vinyl just to make it looked more finished.. Rattlecan on plywood just looks like.. Well.. Rattle can on plywood

Not that you could tell either way when the door is closed..

Do the tubs fill the entire depth of the shelf or is there even more room behind them to hide more stuff..??

Rob

I have black vinyl stair nosing on order for that exact reason.

Tubs are 28" long, box has 29 1/4" clear inside.

[SR1355]

A clean tow strap.....tsk tsk.:giggling:

I know, I know, I'll see if I can get a little mud on it this weekend. :D

[robb]

Looks great!

[fourfourto]

Looks GR8 :clapping:
I would also like to see it with the rear seats down :D

[K9sH3]

:perfect10s: Very good, and thanks for the measurments.

[jp's-h3]

AWESOME!:clapping:

[SR1355]

It's about 2-3" higher than rear seats folding down, which wouldn't make for a very large storage area if I tried to flush it with rear seats down.