Pain to wire PIAA Light s

[partsguy]

Just had a Gobi put on and had no idea the lights were 10X harder to run compared to the H2.
There is no room in the pillars for the THICK wiring so after 12 or so hours moving and rethinking it's set.I hope there is no wind noise.
Sorry just typing out loud.

[MarK M]

Hey Partsguy,

I recently did the same install. What you have to do is cut that black coating with a razor completely off so that the black and white wires only run down the a-pillar.

after you actually wire the rig up is when you want to reapply electrical tape or heat shrink. I used wire luve(sp) and zip tied the ends with black zip ties.

[HummerNewbie]

Pics? http://www.elcova.com/infopop/emoticons/icon_wink.gif

[timgco]

Man, you should have called me! 4 hour job tops! ...once you know the secrets. lol.

do you need a Snoopy bandage? http://www.elcova.com/infopop/emoticons/icon_razz.gif

[partsguy]

Originally posted by timgco:
Man, you should have called me! 4 hour job tops! ...once you know the secrets. lol.

do you need a Snoopy bandage? http://www.elcova.com/infopop/emoticons/icon_razz.gif Up yours! http://www.elcova.com/infopop/emoticons/icon_razz.gif I still have the last one you sent.