New MOD

[KenP]

Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif)

[KenP]

Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif)

[Spike]

Ken,
I actually almost bought that one. That is the cobra right? I wound up buying a cobra handheld so I wouldn't have to deal with an antenna. If there is any "drilling" involved, make sure you measure at least twice!! I'd like to see some pictures of the unit and the antenna mount after it is installed.

[Racer-X]

Oh goody! Maybe mine will come today to!! If it does, I'll post pics! http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_cool.gif

[CO Hummer]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
I have the same setup, and you can install everything without drilling if you use enough duct tape and cable ties http://www.elcova.com/infopop/emoticons/icon_biggrin.gifhttp://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>

Ditto. Have that one too. No drilling required.

[h2co-pilot]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
Nice work Ken. You should take a breather and smoke a cigarette before attempting phase two http://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>
http://www.elcova.com/infopop/emoticons/icon_biggrin.gifhttp://www.elcova.com/infopop/emoticons/icon_biggrin.gif

ps-

WRONG SECTION

http://upload.wikimedia.org/wikipedia/en/0/0f/Nerd.jpg

[MovinH2]

Make sure to post some pics once you get it installed.

[WORKIN]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif) </div></BLOCKQUOTE>
nice kit. you may want to consider loosing the spring mount for that firestick. they are so thick the wind will blow them at a back angle, causing you to loose valuable distance in how far you can send and recieve.....

[KenP]

DAMN!!! I just got home and realized I have to turn the page. CRAP and thanks alot!!!

Ok, I think I'll have to actually put the CB in the truck to make it work. Crapdamn...

As to the spring, well hell, everything else is screwed up now. http://www.elcova.com/infopop/emoticons/icon_mad.gif

I'll never get this junk to work... http://www.elcova.com/infopop/emoticons/icon_mad.gif

[rodster]

Just remember Ken, in spite of what some may say, you really do need to tear out the center console and dash to install two wires and a coax. http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif

[TootsSUT]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif) </div></BLOCKQUOTE>

That's exactly what I got and it is fabulous!!!

[TootsSUT]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by rodster:
Just remember Ken, in spite of what some may say, you really do need to tear out the center console and dash to install two wires and a coax. http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif </div></BLOCKQUOTE>

I installed mine with out creating any new screw marks. Definitely install under the center console but also you can put the cable under the seat then place it under the easily removed plastic piece at the bottom of the rear door entry (lots of space), then run wire in to the rubber seal along the back door, bring up to roof and attach to antenna(s). Works fabulously and is very clean.

The hand held is placed to the right of the steering wheel where the original screw is in the dash!!j Haha!!

I'll get pics if you want them!!

[KenP]

I hate wiring through the front marker lights.

[TootsSUT]

I never touched the front market lights but I'm not certain where your antennas are going to be? Best place for them, from what I've been told, are in the rear of the vehicle. Could be wrong though! http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

You'll see with the pics.

[rodster]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TootsSUT:
... then run wire in to the rubber seal along the back door, bring up to roof and attach to antenna(s). </div></BLOCKQUOTE>

Does the door close on the coax?

[DRTYFN]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by h2co-pilot:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
Nice work Ken. You should take a breather and smoke a cigarette before attempting phase two http://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>
http://www.elcova.com/infopop/emoticons/icon_biggrin.gifhttp://www.elcova.com/infopop/emoticons/icon_biggrin.gif

ps-

WRONG SECTION

</div></BLOCKQUOTE>

[DRTYFN]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
I hate wiring through the front marker lights. </div></BLOCKQUOTE>

It's easy. Make sure to fill it up with silicone sealant.
BTW, I've got the same set up. I think you might have an issue with the antenna mount, though.

[KenP]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by DRTYFN:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
I hate wiring through the front marker lights. </div></BLOCKQUOTE>
BTW, I've got the same set up. I think you might have an issue with the antenna mount, though. </div></BLOCKQUOTE>Me too. May have to go a different route. http://www.elcova.com/infopop/emoticons/icon_mad.gif

[ree]

Ken, mine's better since it doesn't have any red on it. It's all black and sliver/pewter. Plus from the sounds of it, I got mine done faster than you...I used a knife.

[Bondage]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by rodster:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TootsSUT:
... then run wire in to the rubber seal along the back door, bring up to roof and attach to antenna(s). </div></BLOCKQUOTE>

Does the door close on the coax? </div></BLOCKQUOTE>

NO there is an odd little gap http://www.elcova.com/infopop/emoticons/icon_smile.gif - mine is run the same way. It's clean, easy, and works! I'll post some pics in a little bit...

Sean

[Bondage]

Ken - FWIW, this is how I ran mine. Of course, through the marker light would be a bit more professional and be totally invisible, but I agree - it's a PITA!!!
http://www.elcova.com/infopop/emoticons/icon_wink.gif
Sean

[Dan]

Hmm, that looks like http://stuff2do.systs.net/yabbfiles/Smilies/poop.gif

http://www.elcova.com/infopop/emoticons/icon_wink.gif

[La.Swamp Lobster]

Hey Ken,
I have the same set-up with duel mounted 4 ft. sticks, easy to install, and drilled no holes, mounted the duels to the tail light guards, and looks sweet, works great!...good luck with yours!<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif) </div></BLOCKQUOTE>

[ree]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Bondage:
Ken - FWIW, this is how I ran mine. Of course, through the marker light would be a bit more professional and be totally invisible, but I agree - it's a PITA!!!
http://www.elcova.com/infopop/emoticons/icon_wink.gif
Sean </div></BLOCKQUOTE>
Bondage,
Wouldn't gorilla glue look a little foamy brown??? Thats the way it always looks when I use it?

If you think it needs more securing I think it'd look better with a well cut strip of roofing rubber.

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Dan:
Hmm, that looks like http://stuff2do.systs.net/yabbfiles/Smilies/poop.gif

http://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>
x2 </div></BLOCKQUOTE>x3

My coax just runs out the top of the door over the black trim. No need to try to stuff if down in a crack. http://www.elcova.com/infopop/emoticons/icon_wink.gif

[PARAGON]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
Might as well put a WallMart $14 magmount up there and run the coax through a gap in the window http://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>Well mine is a $80 Wilson 1000 magmount and I thought about the window but it would bug me when I opened the door. http://www.elcova.com/infopop/emoticons/icon_wink.gif

[Fubar]

any pics of the install process/route or the finished install?

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by La.Swamp Lobster:
Hey Ken,
I have the same set-up with duel mounted 4 ft. sticks, easy to install, and drilled no holes, mounted the duels to the tail light guards, and looks sweet, works great!...good luck with yours!<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif) </div></BLOCKQUOTE> </div></BLOCKQUOTE>

[ssgharkness020147]

Ha. Tough install Ken http://www.elcova.com/infopop/emoticons/icon_wink.gif. I wish I were in your shoes right now. I'm installing GPS, here's some pics. Ever wonder whats under the dog house of the H1?

[ssgharkness020147]

Alot of ****...

[ssgharkness020147]

Here's a pic of my CB, as far as I'm concerned it doesnt get much better. The switches above are for my lights and DVD system.

[h2co-pilot]

Harky, I love that interior. Did you do that yourself?http://www.elcova.com/infopop/emoticons/icon_smile.gif

That's a lot of wires. It looks like your dash threw up. No wonder you little monkeys take so long doing stuff.http://www.elcova.com/infopop/emoticons/icon_wink.gifhttp://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[WORKIN]

Here is how i mounted my antenna. i use a 4' firestix o-ground plane.........i can send and recieve up to about 25 miles.......

[ssgharkness020147]

No. Most of the work was done by the previous owner. I cant afford to add all that stuff, the wood trim alone is about 2700.00. I've added sattelite radio and now the GPS to the inside, there's really not much that can be done to the interior, its already so modified. I dont know who your wheeling with, but it doesnt take that long. Thats only about 45 minutes of work for me. http://www.elcova.com/infopop/emoticons/icon_smile.gif Now, that alternator problem is another story... http://www.elcova.com/infopop/emoticons/icon_mad.gif

[KenP]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Fubar:
any pics of the install process/route or the finished install?

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by La.Swamp Lobster:
Hey Ken,
I have the same set-up with duel mounted 4 ft. sticks, easy to install, and drilled no holes, mounted the duels to the tail light guards, and looks sweet, works great!...good luck with yours!<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif) </div></BLOCKQUOTE> </div></BLOCKQUOTE> </div></BLOCKQUOTE>Here you are Fubar:
http://elcova.com/groupee/forums/a/tpc/f/6706011751/m/7411047451

Carey, what's that little green wire for? http://www.elcova.com/infopop/emoticons/icon_wink.gif

[Fubar]

KenP, Thanks.

[ssgharkness020147]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Carey, what's that little green wire for? http://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>

Which one, there are like 50 little green wires.

[OrangeCrush]

Damn I missed your original post. Now for the ultimate question, does it work? LOL.

Cause you know the rule... mounting but not hooking up doesn't count as a mod. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

Got it done yet? Show us some pics.

Mark

[WORKIN]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by WORKIN:
Here is how i mounted my antenna. i use a 4' firestix o-ground plane.........i can send and recieve up to about 25 miles....... </div></BLOCKQUOTE>
Is that a Jeep in the garage? http://www.elcova.com/infopop/emoticons/icon_rolleyes.gifhttp://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>
Yes.. its the wife's grand cherokee 06,how could you tell that, its such a dark pic.

[OrangeCrush]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by WORKIN:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Alec W:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by WORKIN:
Here is how i mounted my antenna. i use a 4' firestix o-ground plane.........i can send and recieve up to about 25 miles....... </div></BLOCKQUOTE>
Is that a Jeep in the garage? http://www.elcova.com/infopop/emoticons/icon_rolleyes.gifhttp://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>
Yes.. its the wife's grand cherokee 06,how could you tell that, its such a dark pic. </div></BLOCKQUOTE>

That's hilarious. One thing I learned about posting pics on the net is if you don't want anyone to see anything, ya better make sure there ain't nothing to see...lol. People can spot anything...

Good eye Workin'...lol.

Ken's a jeeper, Ken's a jeeper... nana ana nana

http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

Mark

[h2co-pilot]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
That's hilarious. One thing I learned about posting pics on the net is if you don't want anyone to see anything, ya better make sure there ain't nothing to see...lol. People can spot anything...

Good eye Workin'...lol.

Mark </div></BLOCKQUOTE>

What? Are you afraid we saw your butt blankets were untidy.http://www.elcova.com/infopop/emoticons/icon_wink.gif

http://elcova.com/groupee/forums/a/ga/ul/6561065741/inlineimg/Y/turpan3.jpg

[La.Swamp Lobster]

Hey Ken,
I didn't take any pictures of the install process, but it was real simple, I tied the hot wire to a rocker switch hot side that I have for my K.C. Lites, and ground the C.B. to the ground on same switch. I mounted the box part of the C.B. wiring to the underside of the firewall behind the console with self tapping screws, so that it is out of the way, and conceld very well. I installed a spliter on the coax, and ran the coax out the firewall thought the wiring harness grommet and ran the coax down both sides of the frame to also hide the coax. I used heavy duty zip ties to hold it in place, and came out at the rear bumber on both side between the bumber and the rubber seal that is flexable. (This is the only place that the coax is even visible....also I used a grey coax cable, that is so close to the pewter color of my rig that it is hardly even noticed.) Once up from the bumber, I used simple alum. ant. mounting brackets that I painted blk and bolted them to my rear tail light guards. Installed sticks, zip tied the coax up neatly at rear tail light gaurds,and the job was finished. Took all of about 1 hour to do. By running two coax to each stick, I was able to get a longer run of cable,(About 18' of cable both side)so my reception is great! The only problem with the whole install was where to install the hand-held...I have my cell phone installed where I would like to place it...So I have a new cell phone mount on order, and when it comes in, I will install the mic. in its new home!, but for now, the mic is laid over the console.
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Fubar:
any pics of the install process/route or the finished install?

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by La.Swamp Lobster:
Hey Ken,
I have the same set-up with duel mounted 4 ft. sticks, easy to install, and drilled no holes, mounted the duels to the tail light guards, and looks sweet, works great!...good luck with yours!<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif) </div></BLOCKQUOTE> </div></BLOCKQUOTE> </div></BLOCKQUOTE>

[KenP]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by ssgharkness020147:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Carey, what's that little green wire for? http://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>

Which one, there are like 50 little green wires. </div></BLOCKQUOTE>Wake up, Carey. It was a joke. http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[KenP]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by La.Swamp Lobster:
Hey Ken,
I didn't take any pictures of the install process, but it was real simple, I tied the hot wire to a rocker switch hot side that I have for my K.C. Lites, and ground the C.B. to the ground on same switch. I mounted the box part of the C.B. wiring to the underside of the firewall behind the console with self tapping screws, so that it is out of the way, and conceld very well. I installed a spliter on the coax, and ran the coax out the firewall thought the wiring harness grommet and ran the coax down both sides of the frame to also hide the coax. I used heavy duty zip ties to hold it in place, and came out at the rear bumber on both side between the bumber and the rubber seal that is flexable. (This is the only place that the coax is even visible....also I used a grey coax cable, that is so close to the pewter color of my rig that it is hardly even noticed.) Once up from the bumber, I used simple alum. ant. mounting brackets that I painted blk and bolted them to my rear tail light guards. Installed sticks, zip tied the coax up neatly at rear tail light gaurds,and the job was finished. Took all of about 1 hour to do. By running two coax to each stick, I was able to get a longer run of cable,(About 18' of cable both side)so my reception is great! The only problem with the whole install was where to install the hand-held...I have my cell phone installed where I would like to place it...So I have a new cell phone mount on order, and when it comes in, I will install the mic. in its new home!, but for now, the mic is laid over the console.
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Fubar:
any pics of the install process/route or the finished install?

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by La.Swamp Lobster:
Hey Ken,
I have the same set-up with duel mounted 4 ft. sticks, easy to install, and drilled no holes, mounted the duels to the tail light guards, and looks sweet, works great!...good luck with yours!<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Hey, here's a pic of our latest mod. It was super difficult getting the packaging off, but I think it looks real cool on the work bench. What do you all think?

(This post especially for OC http://www.elcova.com/infopop/emoticons/icon_wink.gif) </div></BLOCKQUOTE> </div></BLOCKQUOTE> </div></BLOCKQUOTE> </div></BLOCKQUOTE>Oh it's finished. Thanks for the info, though. I many want to go with dual antennas like you have. I also used 18' of cable.

Here's the linky. (http://elcova.com/groupee/forums/a/tpc/f/6706011751/m/7411047451)

[Fubar]

la.swamp, thanks for the write up of the install.

[ssgharkness020147]

I know, I was just messing around. Guess I should have used a smiley. http://www.elcova.com/infopop/emoticons/icon_confused.gif

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by ssgharkness020147:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by KenP:
Carey, what's that little green wire for? http://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>

Which one, there are like 50 little green wires. </div></BLOCKQUOTE>Wake up, Carey. It was a joke. http://www.elcova.com/infopop/emoticons/icon_wink.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif </div></BLOCKQUOTE>

[OrangeCrush]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by h2co-pilot:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by OrangeCrush:
That's hilarious. One thing I learned about posting pics on the net is if you don't want anyone to see anything, ya better make sure there ain't nothing to see...lol. People can spot anything...

Good eye Workin'...lol.

Mark </div></BLOCKQUOTE>

What? Are you afraid we saw your butt blankets were untidy.http://www.elcova.com/infopop/emoticons/icon_wink.gif

</div></BLOCKQUOTE>

I'm so embarrassed. http://www.elcova.com/infopop/emoticons/icon_redface.gif

BTW, Touche.... lol.

Mark