PDA

View Full Version : Not Cool


killian
08-14-2007, 08:31 AM
A little over 32,000 miles on my '06 H3 and the A/C is dead. Not good in the 100+ degree heat of Phoenix.

The compressor clearly works but the blower motor clicks when you turn the fan switch on.

I took it to the dealership and they said that a relay fried and took the blower motor with it. They said that on the last few that they did it took them 5 business days to get the parts in.

"Last few?" Does anyone know if there is a TSB on this? Just curious.

They've already had it for four days. (two business days, two weekend days) It blows not having my H3 to drive.

Blah..

KenP
08-14-2007, 02:56 PM
Atleast be happy you've got something with A/C, tho. :eek:

Field Scout
08-14-2007, 03:03 PM
mine went to the shop yesterday for a/c and rear locker trouble, my a/c would stop blowing then start again later. A buddy of mine who has a Canyon has had this happen repeatedly, his is from a bad resistor next to the blower under dash says its a 10 dollar part and 10 min of work, not sure of exact location but says pull 2 screws replace resistor replace screws. I think thats my problem but sounds like yours is worse, mine never clicked just stop then start, good luck:)

CO Hummer
08-14-2007, 04:08 PM
Look at the bright side - At least the front diff outlasted the A/C!

DennisAJC
08-14-2007, 06:00 PM
Look at the bright side - At least the front diff outlasted the A/C!

Even I thought that was mean.

usetosellhummer
08-14-2007, 06:12 PM
Slowly they leave, never to return.

CO Hummer
08-14-2007, 07:54 PM
Slowly they leave, never to return.

You talking about me or the diffs?

DennisAJC
08-14-2007, 07:59 PM
You talking about me or the diffs?

HAHAHAHA!!!!!!

Wisha Haddan H3
08-14-2007, 08:55 PM
mine went to the shop yesterday for a/c and rear locker trouble, my a/c would stop blowing then start again later. A buddy of mine who has a Canyon has had this happen repeatedly, his is from a bad resistor next to the blower under dash says its a 10 dollar part and 10 min of work, not sure of exact location but says pull 2 screws replace resistor replace screws. I think thats my problem but sounds like yours is worse, mine never clicked just stop then start, good luck:)

What's wrong with your locker?

phantom2
08-14-2007, 09:07 PM
DennisAJC...I actually was hoping to get a chuckle from your H3 video, but to tell you the truth,it was extremely dumb.Chasing around a bunch of cows???c'mon

usetosellhummer
08-14-2007, 09:09 PM
:beerchug:

Agriv8r
08-14-2007, 09:55 PM
:crying: