Back up camera

[jmsspratlin]

I want to install a back up cam on my rig. I have the perfect place in the rear bumper, but unsure what is the best camera to get. I will be hooking it up to a Kenwood Excelon DVD unit. Just curious as to what some of you have installed and the difficulty of the installation. Maybe a link as well. Thanks....Jamie

[KingVinnie]

I just put in the Kenwood DDX-7019. Just ordered this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=160157160480&ssPageName=STRK:MEWN:IT&ih=006

I'm gonna put right above the reciever.

[IRA51]

that's pretty small and compact,you could mount it to your boots and get some nice up skirts with that .:fdance:

[jmsspratlin]

I just put in the Kenwood DDX-7019. Just ordered this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=160157160480&ssPageName=STRK:MEWN:IT&ih=006

I'm gonna put right above the reciever.

Thanks

[Hucky]

Similiar to this

http://www.abesofmaine.com/item=HITHCH22~item.htm

[Hucky]

http://www.mobilevideo4less.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=MV&Product_Code=H2CAM&Category_Code=MCC

[Hucky]

http://www.carelectronicsworld.com/index.asp?PageAction=VIEWPROD&ProdID=564

[tower]

Jaimie, take a look at the unicam from hitchcam and also their bracketcam. That's the one I would get if starting from scratch. David Mendoza (owner) makes great stuff!

Link (http://www.hitchcam.com/)

[WHOSNEXT]

I just put in the Kenwood DDX-7019. Just ordered this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=160157160480&ssPageName=STRK:MEWN:IT&ih=006

I'm gonna put right above the reciever.

i have the same 1....works great

[jmsspratlin]

Similiar to this

http://www.abesofmaine.com/item=HITHCH22~item.htm


Thats an option I didn't think about. I actually like it better. Wonder how hard the installation is though. Thanks for the link....Jamie

[KingVinnie]

i have the same 1....works great

Yea, I've used them on other trucks and always been happy. I like that I can flush mount it too. I hate to see a big camera and mount on the back reminds me of a RV. and hey, $30 is a whole lot better than $400+

But I guess if your against cutting holes, the marker light cam would be cool, just wouldnt work on my sut.

[WHOSNEXT]

Yea, I've used them on other trucks and always been happy. I like that I can flush mount it too. I hate to see a big camera and mount on the back reminds me of a RV. and hey, $30 is a whole lot better than $400+

But I guess if your against cutting holes, the marker light cam would be cool, just wouldnt work on my sut.

do you have a rear tire? this is where i mouted mine....see it?

[jmsspratlin]

do you have a rear tire? this is where i mouted mine....see it?

I saw this pic before. I also like the TV satellite on top (TV tuner) How much did that run?

[ttkresurfacing]

Thats an option I didn't think about. I actually like it better. Wonder how hard the installation is though. Thanks for the link....Jamie
I actually have one. It was a little pain to run wires, but only took an hour or so to do.

[Hucky]

I actually have one. It was a little pain to run wires, but only took an hour or so to do.

Take a better pic of that and post it please.

Thanks

[jmsspratlin]

Take a better pic of that and post it please.

Thanks


:iagree:

[jmsspratlin]

I just put in the Kenwood DDX-7019. Just ordered this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=160157160480&ssPageName=STRK:MEWN:IT&ih=006

I'm gonna put right above the reciever.



With that head unit, can you still use the steering wheel controls? Also, does it come with the TV tuner and an iPod interface? Thanks....Jamie

[KingVinnie]

With that head unit, can you still use the steering wheel controls? Also, does it come with the TV tuner and an iPod interface? Thanks....Jamie

With the SWI-Jack I have full control of the unit with the steering wheel buttons. It has usb so you can use USB sticks and drives too. ip300v cable for 5th gen video ipods. Theres a diferant cable for older ones. I'm sure they have a tunner module you can get for it.

Here's what a put in:

1 SWI-JACK Pac Steering Wheel Interface
1 DDX7019 Kenwood 6.95" TFT Screen with DVD
1 KNA-G510 Kenwood Add on navigation system
1 KCA-iP300V Kenwood High speed iPod control
1 GM10 Metra Antenna Adapter
1 99-2003 Metra GM Dash kit
1 Axxess GMOS-04 Bose Interface

I'll be adding rear cam and bluetooth this week.

Paid about $1150 for all of it. Sold the factory nav for $800. So only cost me $350 to upgrade... NICE!!

[mikejr]

The stock 08 camera is mounted just above the reciever hitch. It took some getting used to as far as the distances and how they appear in the screen. I havent set things on the ground to see just what the field of view is. I would think the high mount cam that replaces the center clearance light might be better in giving the driver a better field of vision.

[ttkresurfacing]

I had mine painted to match and blend with the truck. It came with a 4" monitor to mount on the windsheild, but I have it running through an Avic Z1.


Tim

[Hucky]

Thanks Tim
Looks great

How do you like it?

How is it controlled, factory nav screen?

Reverse Only? or while driving and reverse?

Lay down some details. give us some ideas.

Thanks and great job.

hucky

[jmsspratlin]

thanks

[ttkresurfacing]

I have it hooked up through a Pioneer Avic Z1. Automatic in reverse, can watch it at any time on the screen. Can see behind you very well with it even at night. I am going to install a rear tire carrier soon and I will update the view after that. It sits high enough and is adjustable, so I don't see any problems. Very clear picture.


Tim