TRUXXX 2.5F/1.2R KIT INSTALLED.

[Bimmer9938]

Just got the kit installed today. This is the new kit which includes a 1.2" rear spring spacer. :clapping:


http://i22.photobucket.com/albums/b312/Bimmer9938/TRUXXX%20LIFT%20KIT/Picture131.jpg
.

http://i22.photobucket.com/albums/b312/Bimmer9938/TRUXXX%20LIFT%20KIT/Picture134.jpg
.
http://i22.photobucket.com/albums/b312/Bimmer9938/TRUXXX%20LIFT%20KIT/Picture138.jpg
.
http://i22.photobucket.com/albums/b312/Bimmer9938/TRUXXX%20LIFT%20KIT/Picture143.jpg
.
http://i22.photobucket.com/albums/b312/Bimmer9938/TRUXXX%20LIFT%20KIT/Picture135.jpg

[21sH2]

Can you tell us the measurements from center of hub to center wheelwell flare on the front and back? Is front still a little lower than the rear?? Looks great by the way!!

[Bimmer9938]

Can you tell us the measurements from center of hub to center wheelwell flare on the front and back? Is front still a little lower than the rear?? Looks great by the way!!




The wheel wells are all apx. 44" so subtract 17" from the center of the wheel to the ground that gives you roughly 27" from center of wheel to bottem of wheel well (Still on stock rubber). The rear appears a lil higher but the fronts are cranked pretty much all the way up. The ride is still very decent.


PS. thanks for the props! :beerchug:

[Bimmer9938]

BEFORE:

http://i22.photobucket.com/albums/b312/Bimmer9938/TRUXXX%20LIFT%20KIT/BEFORE.jpg

AFTER:

http://i22.photobucket.com/albums/b312/Bimmer9938/TRUXXX%20LIFT%20KIT/AFTER.jpg

[Bimmer9938]

If anyone is interested in buying this kit, I bought it here, they were very easy to deal with.

http://www.fatbobsgarage.com/cart/products/Hummer_H2_2_3_Front_1_25_Rear_Lift_Kit-15568-33.html

[Tex_h2]

What's the ride quality like....better then stock or the same???

[Bimmer9938]

What's the ride quality like....better then stock or the same???


I like it better, its firmer!