PDA

View Full Version : Blower motor


Braveheart7
10-31-2009, 12:38 AM
Anyone know how to remove a blower motor on a 2005 H2?

noisey as hell... seen a post from 2003 saying there was paperin the fan but dont see how to get into it... have glove box out can hear it but can see how to get it out.
any diagrams would be great, thanks is advance

05h2sut
10-31-2009, 12:45 AM
All I had for instructions.

-Dave

51696

Braveheart7
10-31-2009, 12:55 AM
Thank You............so I take it this can be done in place or does the blower housing etc have to come out too... which would mean the dash coming out... surely the manufacturers thought about this .

Braveheart7
10-31-2009, 01:31 AM
FIXED !!!!

Ok to take the motor out this is what to do.

Remove Glove Box ( three self tap bolts along the bottom hinge)
Remove lower Sound panel (two self tap bolts)
unplug motor (three self tap bolts)

remove motor ( it is a bit tight gentle pulling)

Found a fricken Mouses nest ( little bastard)
removed nest from inner fan

rebuild.

Will post picture later.

thanks

[__--MUD--__]
10-31-2009, 02:04 AM
Little bastard mice shredded my hood pad and packed that in my blower motor last month. Also had 8' of 3/8 rope. I'd like to put a screen on where ever the hell this pulls from.

porschett
10-31-2009, 01:21 PM
Started my up this past week and suddenly heard this banging coming out from under the hood. Shut it off and opened the hood to find a dead cat! Stupid thing crawled up in the radiator shroud. No damage except the neighbor is pissed off at me!

Easy Ed
10-31-2009, 05:42 PM
:giggling: :jump: :clapping:



Started my up this past week and suddenly heard this banging coming out from under the hood. Shut it off and opened the hood to find a dead cat! Stupid thing crawled up in the radiator shroud. No damage except the neighbor is pissed off at me!