pulling right when accelerating ? Help.?

[Hammer]

Truck pulls right when I accelerate and when I let off the gas it straightens up. This problem is getting worse more I drive the car.
Could a blown steering stabilizer cause such a problem I have the stock stabilizer...

I have rancho lift with cognito upper control arms and 38" tires...

Thanks
Mike

[twr]

hi did you check the front end, idler and pitman arm and tie rod ends, ball joints. If the front stabilizer does not not leak the only way to check it is to remove one end and push it in and out you should feel resistance both ways. I think you will find something other than the front stabilizer is wrong with the truck.

[HumminNBoatin']

I would check your steering linkage. Odd's are if you have not yet replaced anything you are overdue. On your stabilizer to test it don't just draw it in and out. Do it with speed and force and see what happens. If you find that when you shove on it real hard and it has a more than a couple inches of travel before the resistance kicks in its worn and should be replaced.

I just got done going through this last month. I ended up doing just about everything. Upper and lower ball joints, pitman and Idler arm, and steering stabilizer.

[twr]

hi i guess i should have add this , If you find that when you shove on it real hard and it has a more than a couple inches of travel before the resistance kicks in its worn and should be replaced.