Need your help!

[ROUSHDEMON]

Alright so I ended up replacing my starter on my H2... but here is the thing, while putting back the new starter I accidently pulled the wires off a 3 prung plug sitting right behind the starter against the block, should be sitting Right behind the solenoid, its got 3 wires going to it (Blue, Green, Yellow) I looked everywhere online and couldn't find anything on it, I'm stuck and you guys are my last option.

Anyways, what I NEED from one of you guys is either a picture or just to look at which color wire goes where, top to bottom so I can put it back together.

Can I please get a hand from one of you??

I greatly appreciate it.:beerchug:

[flrtrader]

I have a post right under your wire problems on my tail lights, maybe you can help me out. While looking for wire diagram I found this site that list various wire diagrams. On the left you see a list of starters... several diagrams. Maybe one will help.

http://www.commandocaralarms.com/wiring/2003-2007/Hummer/H2/733.html

[Scarsman]

I wish I could help! I don't have remote start on mine. I'll look at it tomorrow morning to see if mine has that plug if you are still waiting. Just in case it may not be related to the remote start.

[ROUSHDEMON]

Alright so I changed my post cause its NOT the remote start wires... I put the starter back up and the new starter is working and the engine is turning but it wont fire, no go.
So that plug has to be on every H2 because it's not sending a signal or something and not letting it start.

Can somebody PLEASE reach with your left hand through the side of the right fender and chassis feel for a plug that is sitting right behind the solonoid against the block, it should have a little tab that you can pull to unplug it and see which order the 3 wires are in???
I'll be checking this post but if you wanna go above and beyond you can text or call me at 407-310-8310.

Really appreciate it guys.

This is how the plug looks like.

http://i280.photobucket.com/albums/kk179/ROUSHDEMON/HUMMER/IMAG0141.jpg

[Scarsman]

Here you go. I called you and left a message with my phone number, but I'll post this in case you come here first. This is looking at with the clip on the FAR side. So the side you are looking at here is the side that goes towards the engine block. If you need any clarification feel free to call me. I will be home all day.

http://img.photobucket.com/albums/v233/91cr500/100_1182.jpg

[ROUSHDEMON]

My man... I cannot thank you ENOUGH for helping me out and saving me so much trouble, time and money, I dropped my phone in the car earlier and forgot about it and missed your calls, just called you back and your wife couldn't find you lol, just wanted to thank you thank you thank you so much for going through the trouble to find this and helping a brother out.:beerchug:

Also, Thanks Hummin'n'Boating (Eric) for giving me a hand on this as well.

You guys Rock!
:beerchug: :beerchug: :beerchug:

[Scarsman]

Hey, no problem. I will say, it took me about 15 minutes to get the darn plug back on. That's kind of a bugger of a plug! Glad you got it going.