!!! Need 6 Dash Bolts ASAP !!!

[EarlsSVT]

I need 6 of the Hex bolts that go across the dash. I dont want to order the stainless ones but I will if I need to.



I am hoping that some of you guys might have some laying around.



I need 6 of the OEM ones like the before pic.



Thanks,

Earl



336-957-6240 Cell #

http://a248.e.akamai.net/origin-cdn.volusion.com/w7x3q.wtgr9/v/vspfiles/photos/PM-H2-INT-707-2.jpg

[fyr145]

I upgraded my dash bolts when I got my H2. So I have all 10 of the factory bolts. How do you want to handle this?

fyr145

[EarlsSVT]

How much do you need shipped and I'll paypal you.

USPS standard shipping will be fine.

[HummerJim]

I upgraded my dash bolts when I got my H2. So I have all 10 of the factory bolts.

fyr145

What did you use for the upgrade? Pictures?

[fyr145]

What did you use for the upgrade? Pictures?

I have the carbon fiber dash kit, so I simply went to my local hardware store and got a set of stainless steel ones to replace the bland factory looking ones. Then came home and switched them out they look much better against the dash and stand out a little more.

I can do pics tomorrow when I get home, if you still need them.

[fyr145]

How much do you need shipped and I'll paypal you.

USPS standard shipping will be fine.

PM sent

[Humdingah]

I can do pics tomorrow when I get home, if you still need them.

I'd like to see a few pics of the C/f dash and your bolts if you get a chance...who did the dash for you and are you happy with what they did (assuming you did the hydrographics on it)?

Dan

[EarlsSVT]

Payment Sent.

Thanks,
Earl

I knew you guys could help me.

[fyr145]

I'd like to see a few pics of the C/f dash and your bolts if you get a chance...who did the dash for you and are you happy with what they did (assuming you did the hydrographics on it)?

Dan

Hi Dan,

Mine was an OEM kit that I got off eBay awhile back. It was a 5 piece kit. It looks nicer than the regular flat black dash. Then when I got that installed, those bolts just made it look cheap, so i went to my hardware store, took one of them in to match the thread pattern and BINGO! I had 10 stainless Steel bolts that look just like the factory ones but look much better. I could have ordered chrome ones too but they wanted too much for each one of them, so I setteled for the stainless steel ones. I'll try and snap a few pics with my digital camera tomorrow when i get off work.

Lon

[[__--MUD--__]]

Just go to Ace Hardware, TrueValue, Lowes or Homedepot.

I got chrome bolts...look awesome against the carbon fiber dash.

If you just want the factory look, its like 10 bucks. Not worth the effort having them shipped.

[LoJac963]

Hi Dan,

Mine was an OEM kit that I got off eBay awhile back. It was a 5 piece kit. It looks nicer than the regular flat black dash. Then when I got that installed, those bolts just made it look cheap, so i went to my hardware store, took one of them in to match the thread pattern and BINGO! I had 10 stainless Steel bolts that look just like the factory ones but look much better. I could have ordered chrome ones too but they wanted too much for each one of them, so I setteled for the stainless steel ones. I'll try and snap a few pics with my digital camera tomorrow when i get off work.

Lon

I've been thinking about pulling the trigger on the CF kit also but their disclaimer of the kit having scratches really deters me. I would definitely like to dress up the dash a little though!

[[__--MUD--__]]

I've been thinking about pulling the trigger on the CF kit also but their disclaimer of the kit having scratches really deters me. I would definitely like to dress up the dash a little though!

If its the guys from michigan, pretty much all the good stocks been gone now for over a year. If you can do paint work yourself, the panels do have clear coat on them. You can buff down the scratches and re-clear them.

[fyr145]

I've been thinking about pulling the trigger on the CF kit also but their disclaimer of the kit having scratches really deters me. I would definitely like to dress up the dash a little though!

I guess it would depend on where you get the kit from and the locations/severity of the scratches are. I would agree that the minor ones could be rubbed out. It would be a personal decision.

[LoJac963]

SAE Parts on Ebay is the only decent priced kit I can find. As mentioned though the disclaimer of scratches really turns me off the kit. Its a great price when they put it on sale but to still spend a little over $300 for something I'll probably have to fix isn't worth it IMO. I would almost rather spend double that for a brand new argentanium kit.

[guruerror]

What did you use for the upgrade? Pictures?
Stainless steel from Home Depot...one of the first things I did. The stock bolts looked to 'cheap' to me.

http://i74.photobucket.com/albums/i271/guruerror/34d7701d.jpg

[fyr145]

I agree! These are the ones that i have now on my dash with the CF.:iagree:

[fyr145]

Payment Sent.

Thanks,
Earl

I knew you guys could help me.

They're on their way to you!