PDA

View Full Version : tricky no start problem..


MrIgor
07-20-2013, 06:11 AM
Today I finished installing new transmission, the engine cranks BUT ONLY starts for a sec if i spray starter fluid into throttle body (quickstart) and dies right away. Looks like I have no fuel BUT The most confusing thing is in the fuel rails there is fuel if i press the release nipple.

It started before like clock work, no problems ever before I replaced transmission. it cant be a wiring thing, because I have spark, and NO check engine codes.

How can it be that I have fuel in the rails, and spark and wont start???

jsbihn
07-20-2013, 12:41 PM
Is the trans in the park gear?

MrIgor
07-20-2013, 04:05 PM
Is the trans in the park gear?


yes otherwise it wouldnt let me crank

MrIgor
07-20-2013, 04:36 PM
I noticed my PCM fuse was blown, installed new one.. but no changes.

MrIgor
07-20-2013, 08:38 PM
update: i just checked i have constant 57 psi. and i have spark. But wont start??? if i spray starter fluid into TB it runs for a second or two then dies.

What am i missing?

MrIgor
07-20-2013, 11:46 PM
it seems the PCM is not sending signal to the injectors, but the injectors do have power.

Planohummer
07-31-2013, 06:52 PM
theft system disables injector pulse. are you using a new key?