UNOMYFLO
03-27-2006, 01:26 AM
Hey all I had the drivers rattle and I located it.
The tweeter in the drivers a pillar is mounted in a 3 clip retainer with ****ty tolerances.
I pulled the a pillar plug removed the phillips head screw and took it off the tweeted has an 1/8" of an inch play in it. Enough to rattle at certain rpm's drove me nuts.
I used some electrical tape and went around the tweeter housing and then snapped it back in rattle gone.
UNO
The tweeter in the drivers a pillar is mounted in a 3 clip retainer with ****ty tolerances.
I pulled the a pillar plug removed the phillips head screw and took it off the tweeted has an 1/8" of an inch play in it. Enough to rattle at certain rpm's drove me nuts.
I used some electrical tape and went around the tweeter housing and then snapped it back in rattle gone.
UNO