Guess who made your H3's engine....You don't want to know

[H3Lady]

Guess who made your H3's engine....You don't want to know

f5fstop, don't say nothing yet if you know...

[H-Unit]

Izuzu?

[f5fstop]

This should be good. http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif
Why would I not want to know (already know). Is there something wrong with that particular place? I guess to be more technical, what do you mean by "made?"
Head, cylinder block, pistons, cams, rods, etc., are made onsite at the assembly plant or they are shipped into the assembly plant from different locations; throughout the world.
So, I ask, what is your definition of made?

If you mean manufacturing site, which I immediately think of, then that is one of the 50 states.

[H3Lady]

It was a surprise to me today... that's all

[f5fstop]

Let me say this:
The engine is manufactured in one of the 50 States (this I can prove in about five minutes); however, it's twin the I-6 is manufactured in this place and in MI.
The engine castings are produced by at least two different suppliers, depending on the requirements (sales of the engines). One of these places, also casts Toyota engines that are used in the Lexus as well as some Toyotas.
The cylinder heads are not actually casted, since they are manufactured using the lost foam method.
I'll be honest, not sure who manufactures the pistons, rods, bearings, camshafts at this time, but easy to look up.
The only thing I can think of that would surprise you, or make you post a message than makes it appear it is a place people won't like, is that you learned where some of the engine blocks are casted. Again, if it where I think you think, this place also produces Toyota engine blocks (probably other companies too), and yes, they are the big ocean.

[Surferjo]

Was it these guys?

http://sterwa.ru/spaw/images/UGLY-MEN.jpg

[f5fstop]

Originally posted by Surferjo:
Was it these guys?

http://sterwa.ru/spaw/images/UGLY-MEN.jpg

Nope...these guys designed the Aztek.

[H3O]

So are you going to tell us or what?

[HummerNewbie]

Originally posted by f5fstop:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Surferjo:
Was it these guys?

http://sterwa.ru/spaw/images/UGLY-MEN.jpg

Nope...these guys designed the Aztek. </div></BLOCKQUOTE>

LMAO http://www.elcova.com/infopop/emoticons/icon_biggrin.gif http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[f5fstop]

I believe there is someone who commonly posts on this site who works there or is very close to there.

[richk]

It's pretty annoying to post a message like "... and you don't want to know". If you are not going to tell us, then what was the point of this message thread?

[H3Lady]

Well, I have been at the Red cross helping all day....

Anyway, GM Daewoo Auto & Technology Co..Korean

[f5fstop]

Not correct....
For proof, here is a vehicle build sheet for my Hummer.
Component Code : 10 - ENGINE ASSEMBLY
Source Plant : T - CPC TONAWANDA, NEW YORK
Part/Num Broadcast : NJT Traceability : 043350379
Date Scanned : 04/26/2005 Time Scanned : 09.38.00 Scan Station : 01

Please note: Engine Assembly Source Plant....Tonawanda, NY.

More proof:
3.5L I-5 Information (http://media.gm.com/division/2005_prodinfo/powertrain/specs/05_truck_engine_specs.html#l52)
This is the GM powertrain website, that shows were all the engines are manufactured.

Now, I need to ask, which son told you this? The lawyer or the GM executive?

Mark (or is it Marc) from GM works either at this plant or nearby. I believe he can verify.

[VTSTOMPER]

H3Lady, why do you troll so hard? Do you hate your H3 that much? It seems like you never post happy thoughts about - well anything.

I would only expect to see a thread like this from a pissed off person that really dislikes the Hummer name.

[H3Lady]

PS. My kids did not tell me.

Anyway...I was also told the I5 is on the graveyard cut list too....

I wish I did not know this as It makes me upset too.

sorry...

http://www.detnews.com/2005/autosinsider/0506/02/A01-200229.htm

[H3Lady]

Originally posted by VTSTOMPER:
H3Lady, why do you troll so hard? Do you hate your H3 that much? It seems like you never post happy thoughts about - well anything.

I would only expect to see a thread like this from a pissed off person that really dislikes the Hummer name.

I don't hate it, look at all the post by others with problems - just look. GM release this vehicle ahead of schedule..I know this for a fact...they are now tightening quality control for it and that is good...real good. My H3 is now waiting for a control module and a new rear end...

[VTSTOMPER]

Fair enough.

You just seem very negitive about it.

Party on - that is all! http://www.elcova.com/infopop/emoticons/icon_smile.gif

[H3Lady]

Originally posted by VTSTOMPER:
Fair enough.

You just seem very negitive about it.

Party on - that is all! http://www.elcova.com/infopop/emoticons/icon_smile.gif

Cooooooool Ps, I saw the new navigation today.. it is cool.. and it matches the dash and the dash has a change too. I will see If I can get a pic soon

[DennisAJC]

Originally posted by H3Lady:
BLAH, BLAH, BLAH

[H3Lady]

DennisAJC

You did not have to post your picture here...

[DennisAJC]

I pretty much respect the H3 Section. I enjoy reading the fellow Hummer posts. In general, I read, enjoy, and compliment on the rigs.

You IMO are a touchy little bitch that whines incessantly, bringing nothing positive.

Take your negativity tease and get the **** out. You promised to leave once, but like a herpe you contracted from the last pizza boy, you returned.

It's such a downer whenever you post.

[H3Lady]

Originally posted by DennisAJC:
I pretty much respect the H3 Section. I enjoy reading the fellow Hummer posts. In general, I read, enjoy, and compliment on the rigs.

You IMO are a touchy little bitch that whines incessantly, bringing nothing positive.

Take your negativity tease and get the **** out. You promised to leave once, but like a herpe you contracted from the last pizza boy, you returned.

It's such a downer whenever you post.

This is H3Lady's son...you ass hole...I will find your VIN in the system as I can and I hope you don't need a major repair on you H3....MY MOM IS OUT OF HERE TONIGHT... FU you canook basterd

My mom is handicap and sitsat home all day..I happen to be online reading this...

[frank6150]

Originally posted by H3Lady:
This is H3Lady's son...you ass hole...I will find your VIN in the system as I can and I hope you don't need a major repair on you H3....MY MOM IS OUT OF HERE TONIGHT... FU you canook basterd

My mom is handicap and sitsat home all day..I happen to be online reading this...

What a ****ing tool. http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif

I'm quite certain you are a retard. When you are done lickin mommies ass crack make sure you do your homework otherwise no popsicle for you!

[HummBebe]

"This is H3Lady's son...you ass hole...I will find your VIN in the system as I can and I hope you don't need a major repair on you H3"

Careful !!! You are not the only person on this site who knows somebody who knows somebody who knows somebody. http://www.elcova.com/infopop/emoticons/icon_smile.gif

Momma needs a new pastime......

[Georgemarc]

Handicap?
Sits at home all day?
Having a H3 makes perfect sense to me for H3Lady
Perhaps the next commercial for the H3 can focus on the handicap and how the H3 is the prfect vehicle for them......
Give me a brake

[DWPC]

IIRC, the window sticker says the H3 has 85% US/Canadian content. It couldn't be that high with a Korean-made engine, even if the percentage was weight.

[H3 Builder]

GM release this vehicle ahead of schedule..I know this for a fact...they are now tightening quality control for it and that is good...real good. My H3 is now waiting for a control module and a new rear end...

No, Its release was pushed back by 6 weeks because they wanted to make sure that things were in order. I think we have done a great job in this area. Sure there are some problems, but all mass produced vehicles are prone to these problems, especially with all the electronics in vehicles these days. As far as quality control, we can match up with anyone in the buisness. As an assembly plantwe always strive to get better. As far as tightening quality control, it's been pretty tight from day one.

As far as the engine, I thought it was all North American made. Not to say it wasn't designed by someone outside the USA. Like the Colorado was designed by Isuzu.

[DennisAJC]

Originally posted by H3Lady:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by DennisAJC:
I pretty much respect the H3 Section. I enjoy reading the fellow Hummer posts. In general, I read, enjoy, and compliment on the rigs.

You IMO are a touchy little bitch that whines incessantly, bringing nothing positive.

Take your negativity tease and get the **** out. You promised to leave once, but like a herpe you contracted from the last pizza boy, you returned.

It's such a downer whenever you post.

This is H3Lady's son...you ass hole...I will find your VIN in the system as I can and I hope you don't need a major repair on you H3....MY MOM IS OUT OF HERE TONIGHT... FU you canook basterd

My mom is handicap and sitsat home all day..I happen to be online reading this... </div></BLOCKQUOTE>

Damn! I feel so guilty now.

Just because your mom is a retard and is a miserable shrivelled up gunt, doesn't mean it gives her the right to bring everyone else down on this Forum.

Now go and lift your mom into bed and tuck her in.

Remember, lift her like a human being....Not like a six pack.

My VIN# is 3342GO-****457348YOURSELF8544-1

[Tones H3]

http://www.elcova.com/infopop/emoticons/icon_biggrin.gif LMAO

[Hummertech]

Originally posted by VTSTOMPER:
H3Lady, why do you troll so hard? Do you hate your H3 that much? It seems like you never post happy thoughts about - well anything.

I would only expect to see a thread like this from a pissed off person that really dislikes the Hummer name.

I GUESS HER GLASS IS ALWAYS HALF EMPTY

[MyxH3]

This thread chuckles me.... http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

[partsguy]

Originally posted by DennisAJC:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by H3Lady:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by DennisAJC:
I pretty much respect the H3 Section. I enjoy reading the fellow Hummer posts. In general, I read, enjoy, and compliment on the rigs.

You IMO are a touchy little bitch that whines incessantly, bringing nothing positive.

Take your negativity tease and get the **** out. You promised to leave once, but like a herpe you contracted from the last pizza boy, you returned.

It's such a downer whenever you post.

This is H3Lady's son...you ass hole...I will find your VIN in the system as I can and I hope you don't need a major repair on you H3....MY MOM IS OUT OF HERE TONIGHT... FU you canook basterd

My mom is handicap and sitsat home all day..I happen to be online reading this... </div></BLOCKQUOTE>

Damn! I feel so guilty now.

Just because your mom is a retard and is a miserable shrivelled up gunt, doesn't mean it gives her the right to bring everyone else down on this Forum.

Now go and lift your mom into bed and tuck her in.

Remember, lift her like a human being....Not like a six pack.

My VIN# is 3342GO-****457348YOURSELF8544-1 </div></BLOCKQUOTE> Heartless bastard!
Are you sleeping with drty or just going on your own to be an *******?
peoples with downs should not be played with. You are thankful your kids are healthy and without major problems of the type you have shown in that picture.
Look at your kids and tell me I"m wrong.
Dick!~!!!

[DennisAJC]

Partsguy,

Did something happen that made you a saint all of a sudden????

Born again Christian?

Or just a guy with TWO FACES????? Help me here.


Originally posted by partsguy:
Hook up a 220v grid to the floor boards.Instant
fried ass hole. <span class="ev_code_RED">To your fellow man?</span>

Originally posted by partsguy:
Oh,I forgot nasty looking girl in this thread!!!!!!!!!!!!!!!! http://www.elcova.com/infopop/emoticons/icon_eek.gif <span class="ev_code_RED">Didn't even know her?</span>


Originally posted by partsguy:
So shes a HOT PIG. <span class="ev_code_RED">Making fun of fat people is acceptable to you?</span>

-When Devilsfan posted the same type of picture you were so digusted about, you showed glee and approval???... http://elcova.com/groupee/forums/a/tpc/f/2606011751/m/7.../945108408#945108408 (http://elcova.com/groupee/forums/a/tpc/f/2606011751/m/756102997/r/945108408#945108408)

-Not to mention your dislike for certain races.

Nothing I hate more than a person with two faces. Are you trying too hard to appease the H3 crowd? Help me here because I've lost respect for you.

Are you always a two face? Do you do that when you're peddling your auto parts? Say anything for the sell or appeasment?

Ya I got kids with certain problems and good friends with kids that are RETARDS. We accept it, live with it, and make light of it. That's life.

Your kind is the worst kind. You wave your hands in the air crying treat the handicap with respect!!! And walk away with a snicker knowing you just pulled the wool over their eyes.

Now STFU you DICK. http://www.elcova.com/infopop/emoticons/icon_wink.gif

[H3OH]

Well, something I learned out of this...

That would explain the Jeckyl/Hide posts by H3Lady. Her and her son trading off.

But I have to ask...if she is crippled, how is it she has several Harley's and an H3? Or if it's her sons toys, why doesn't he/she/it change their name to "H3Son" or something? I thought her son was the one that worked for GM?

I'm confused. I give up. I need more beer.

http://www.smileys.ws/sm/confused/00000010.gif

[partsguy]

You will never hear me say a damn thing about
Race,or peoples with a disabilty!!!
Last time I checked a person that is over weight is not considered a disabilty.
Posting picture's like that are the weakest thing
a (so called)Man can do!
And no I claim to be no saint,but You have a real problem.
My child's know how I feel about people who steal or bully others!Can you say the same.
Think for crying out loud!
Buy the way when you join the human race let me know.
I not here to make anyone happy I just try to help when I can ,If you checked I do not push myself on anyone!!
so peddle this you ass.
Have a NICE DAY in your Ivory tower,
being the god you are.

[HeimenHummer]

Originally posted by DennisAJC:
Partsguy,

Did something happen that made you a saint all of a sudden????

Born again Christian?

Or just a guy with TWO FACES????? Help me here.


<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by partsguy:
Hook up a 220v grid to the floor boards.Instant
fried ass hole. <span class="ev_code_RED">To your fellow man?</span>

Originally posted by partsguy:
Oh,I forgot nasty looking girl in this thread!!!!!!!!!!!!!!!! http://www.elcova.com/infopop/emoticons/icon_eek.gif <span class="ev_code_RED">Didn't even know her?</span>


Originally posted by partsguy:
So shes a HOT PIG. <span class="ev_code_RED">Making fun of fat people is acceptable to you?</span>

-When Devilsfan posted the same type of picture you were so digusted about, you showed glee and approval???... http://elcova.com/groupee/forums/a/tpc/f/2606011751/m/7.../945108408#945108408 (http://elcova.com/groupee/forums/a/tpc/f/2606011751/m/756102997/r/945108408#945108408)

-Not to mention your dislike for certain races.

Nothing I hate more than a person with two faces. Are you trying too hard to appease the H3 crowd? Help me here because I've lost respect for you.

Are you always a two face? Do you do that when you're peddling your auto parts? Say anything for the sell or appeasment?

Ya I got kids with certain problems and good friends with kids that are RETARDS. We accept it, live with it, and make light of it. That's life.

Your kind is the worst kind. You wave your hands in the air crying treat the handicap with respect!!! And walk away with a snicker knowing you just pulled the wool over their eyes.

Now STFU you DICK. http://www.elcova.com/infopop/emoticons/icon_wink.gif </div></BLOCKQUOTE>


DAMN!!!!!!LMAO! Can't get anything past you Denis. http://www.elcova.com/infopop/emoticons/icon_biggrin.gif I'm with you bro.

I notice that alot on the site. People who say anything just to be part of the crowd. Like the ones who tell the beggers they don't have any change but carry a big wad of cash. http://www.elcova.com/infopop/emoticons/icon_confused.gif

Partsguy. you should lighten up. I don't think Dennis was using that pictre as a stab at handicaps. You act like some kind of newb. Your split personality postings just made you look like an arse.

[KenP]

Originally posted by H3Lady:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by DennisAJC:
I pretty much respect the H3 Section. I enjoy reading the fellow Hummer posts. In general, I read, enjoy, and compliment on the rigs.

You IMO are a touchy little bitch that whines incessantly, bringing nothing positive.

Take your negativity tease and get the **** out. You promised to leave once, but like a herpe you contracted from the last pizza boy, you returned.

It's such a downer whenever you post.

This is H3Lady's son...you ass hole...I will find your VIN in the system as I can and I hope you don't need a major repair on you H3....MY MOM IS OUT OF HERE TONIGHT... FU you canook basterd

My mom is handicap and sitsat home all day..I happen to be online reading this... </div></BLOCKQUOTE>They're both very negative, aren't they? http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif H3Lady'sboy, your spelling sucks. Get off the computer and get to school. http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif

[partsguy]

Dennis I really did not ever want to call you out but,do you think It's right to post pictures of people with certain disabiltys like that. .
I'm not the god you are and I'm sorry for ever calling you out.
Have a great life.
You call me two faced maybe.....But posting picture's like that are not right.

Reguards
JJG

[Dani]

Originally posted by f5fstop:
Not correct....
For proof, here is a vehicle build sheet for my Hummer.
Component Code : 10 - ENGINE ASSEMBLY
Source Plant : T - CPC TONAWANDA, NEW YORK
Part/Num Broadcast : NJT Traceability : 043350379
Date Scanned : 04/26/2005 Time Scanned : 09.38.00 Scan Station : 01

Please note: Engine Assembly Source Plant....Tonawanda, NY.

More proof:
3.5L I-5 Information (http://media.gm.com/division/2005_prodinfo/powertrain/specs/05_truck_engine_specs.html#l52)
This is the GM powertrain website, that shows were all the engines are manufactured.

Now, I need to ask, which son told you this? The lawyer or the GM executive?

Mark (or is it Marc) from GM works either at this plant or nearby. I believe he can verify.

I talked to my father in law about this and he confirms that the engine is made at the Tonawanda plant. I think he would know as he works at that plant.

[mightypuck]

Cooooooool Ps, I saw the new navigation today.. it is cool.. and it matches the dash and the dash has a change too. I will see If I can get a pic soon

H3Lady, please post pics of the new navigation system when you get them. Thanks.

[Marc H3]

Originally posted by H3Lady:
Guess who made your H3's engine....You don't want to know
f5fstop, don't say nothing yet if you know... Originally posted by H3 Builder:
... As far as the engine, I thought it was all North American made. Not to say it wasn't designed by someone outside the USA. Like the Colorado was designed by Isuzu. Originally posted by H3Lady:
... Anyway...I was also told the I5 is on the graveyard cut list too....

I wish I did not know this as It makes me upset too.
sorry...
<span class="ev_code_BLUE">I -5 is made in Tonawanda, New York - btw: the Largest Engine Plant in the World!

... Grave yard NOT! http://www.elcova.com/infopop/emoticons/icon_rolleyes.gif

We make the I -5 for the Chevrolet Colorado/GMC Canyon & now the H3! Next year the I-5 will be getting 25 more HP and perhaps there might be a V8 option offered in 08 for those that need the extra towing power.

That certainly doesn't mean the I - 5 is dead! http://www.elcova.com/infopop/emoticons/icon_mad.gif The vast majority of our buyers are looking for the Hummer style and certainly want much better gas mileage than the H2s get. That article above states that the Hummer weighs 700 lbs more than the pickups, however the 4 door pickup versions weighs approx. 250 lbs. more than the H3.

After driving the H3 for over two months and getting use to the drive line I am satisfied with its power (plently enough for what I need) and so are about 90 + % of the new H3 owners.</span>

[usetosellhummer]

The I-5 is not ging anywhere, and H3lady has probs I guess. Don't like it, don't buy it. And I am totally afended by the Aztek hit, I paid 32k for a tricked out Aztek in 01 and it is worth only 14 k. Good news is the mo fo is so ugly people don't even dent it in the lot let alone try to steal the troll. My Aztek is so pimped it has heads up display and heated leather, ah uh

[Humdingah]

Originally posted by H3Lady:
Well, I have been at the Red cross helping all day....

My mom is handicap and sitsat home all day..I happen to be online reading this...

Hmmm...seems to be two completely opposite statements. Seems that not only is she handicapped and allegedly stuck at home all day but she's got multiple personalities too!

[H3OH]

I guess she saw TONAWANDA and thought it was Korean.

Tonawanda and Okanawa are close. http://www.elcova.com/infopop/emoticons/icon_wink.gif

[Black_H3]

By DennisAJC

My VIN# is 3342GO-****457348YOURSELF8544-1


I laughed so hard, people came into my office thought I was having a seizure http://www.elcova.com/infopop/emoticons/icon_razz.gif

[f5fstop]

Thought this thread would be dead by now.
First, if H3Lady is handicapped, I will apologize for any nasty remarks made. However, please answer me as to how if you are handicapped and in a chair you help with the Red Cross, and drive an H3.
Second, the son appears not to be an exec at GM, since the spelling is terrible (ok, maybe he is an engineer). As for a GM exec threatening to basically void a warranty, this ever gets out, he could be fired.
The I-5 is far from dead, we have in our facility the new version of the same engine, and guess what, it still has five cylinders.
As for the Detroit New article…please, anyone who reads the Detroit News knows that all they do is bash US vehicles. As for people who say it is underpowered, they have never really driven the vehicle, or understand the differences between a large SUV made for driving to and from a soccer field versus an off-road vehicle designed to drive comfortably on the highways and be able to go off road at any turn.
In my opinion, the current engine is very adequate. Yes, it could use 20-25 more horses, but I did not purchase this vehicle beat “ricers” off the line. More HP might (and I say might) give it a bit better fuel economy since the engine will not have to labor as much off the line, but the fuel mileage I’m getting is more than adequate for this large heavy vehicle.
This vehicle is very well made; it is tight as hell, good quality in the building of the vehicle (exterior gaps are great, interior well made and installed, etc.). In my opinion (and that is all it is), it has better quality than my 2003 Vette, and I considered that a well-made car (except for the cheap looking interior).
Yes, there will be problems with some components due to suppliers, but it is man-made, and therefore, mistakes will happen. Just be happy that most of these mistakes will be found out well within the warranty period.
Now, let’s let the engine rest, it is a US manufactured engine (verified by quite a few other people), it will be around for quite some time, and it is built to take punishment.

[PARAGON]

If H3Lady is handicapped I will assume any nasty remarks fstop made. "her" handicap does not require a wheelchair, I am pretty sure.

Not only was that a Detroit News article but is was an article from 3 months ago. A full 2 weeks after the release of the first H3s. What's more sad about the trolling effort of "lady" is the time being spent to try to fit in, just so "it" can troll. Just think about all of the googling he must be doing just to try to keep up.

[Roger]

Hell im in a wheelchair and I dont take any offense to any remarks in here. People need to have a thicker skin if there gonna post dumb ass ****.