Zoomers Exhaust Video

[Aperformance]

I'm currently tring to become a supporting vendor/ advertiser here at Elcova Forums and hope to be offering both our H2 and H3 dual exhausts at a group buy rate.. In the mean time here are some photos and some video clips of Zoomers Exhaust. P.S. I've tried to contact someone about advertising and have gotten no responce, can anyone direct me so I can PM the person incharge. Thanks

Hummer H2 Video: http://www.zoomersexhaust.com/h2/default.htm

Hummer H3 Video: http://www.zoomersexhaust.com/H3/default.htm

[timgco]

Did you try the ADVERTISE and CONTACT infoon the left? If so, Jason will get back to you.

ANy more pics on the H3 underside? Are the tips detachable?

[HummerNewbie]

Originally posted by timgco:
Are the tips detachable?

Very important feature to have on these http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

I really like the sound of the H2 exhaust but not sure yet on the H3.

[Aperformance]

Originally posted by timgco:
Did you try the ADVERTISE and CONTACT infoon the left? If so, Jason will get back to you.

ANy more pics on the H3 underside? Are the tips detachable? Yes I did try that over a month ago and just yesterday with no reply. Do you have Jason's e-mail? what's his member name? I do have some great pics but can't seem to post them, what's the trick? The tips are not detatchable but are angled up out of the way for clearance. I tried to post a attachment but all i get is the box w/ an X

[Aperformance]

Originally posted by HummerNewbie:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by timgco:
Are the tips detachable?

Very important feature to have on these http://www.elcova.com/infopop/emoticons/icon_biggrin.gif

I really like the sound of the H2 exhaust but not sure yet on the H3. </div></BLOCKQUOTE>

I'm not real happy with the sound quality on the H3 video there seems to be some over modulation and distortion. I'll try and get some new video up soon. It sounds great in person and acually has a nice deep idle. Best of all no drone or cabin resonance.

[DeLeon]

Hey Aperformance, welcome to the forum!

Where are you guys located?

Thanks!

[HummerNewbie]

It would be great if you could also get some audio from in the cabin so we can hear the difference. To me the H3 sounded more like a tricked out Honda while the H2 sounded like a strong V8. Maybe it was just the modulation and distortion you mentioned though. I will have to go back and look at the tips but if they stick below the bumper at all they will be a problem unless they are removable.

[DDWH]

I like the sound of the H2http://www.elcova.com/infopop/emoticons/icon_biggrin.gif The H3 I think sounds good, but somewhat ving ving race carish....I would think its do to the motor, but I do like it better than the stockhttp://www.elcova.com/infopop/emoticons/icon_wink.gif

Whats the pricing and do you guys offer installations?

[Aperformance]

Originally posted by HummerNewbie:
It would be great if you could also get some audio from in the cabin so we can hear the difference. To me the H3 sounded more like a tricked out Honda while the H2 sounded like a strong V8. Maybe it was just the modulation and distortion you mentioned though. I will have to go back and look at the tips but if they stick below the bumper at all they will be a problem unless they are removable.

Well it's difficult to get V8 sound out of an I5 as you can imagine. Still it has a nice deep sound for that engine... I'll work on the video to get some better sound quality and more variety, start-up, launch, drive-by and inside crusing. I'll send you some pics but for some reason I cant post them... please help!

[Aperformance]

Originally posted by DeLeon:
Hey Aperformance, welcome to the forum!

Where are you guys located?

Thanks! We are in Irvine, CA Right next to the Irvine Auto Center

Arlasky Performance
15801 Rockfield Blvd.
Irvine, Ca 62618

Ron 949-916-3240

[Aperformance]

Originally posted by DDWH:
I like the sound of the H2http://www.elcova.com/infopop/emoticons/icon_biggrin.gif The H3 I think sounds good, but somewhat ving ving race carish....I would think its do to the motor, but I do like it better than the stockhttp://www.elcova.com/infopop/emoticons/icon_wink.gif

Whats the pricing and do you guys offer installations?

I don't know if I can discuss price without becoming a vendor first but Suggested retail price for the H2 is $1199.00 and the H3 is $899.00 When we become a vendor we'll be offering discounts for group buys. Both systems are 304 stainless steel and come with a lifetime warranty and a money back performance guarantee. Yes... we do installations too.

[Aperformance]

Figured out the pics...Check em out!

[Aperformance]

More....

[Aperformance]

a few more...

[Aperformance]

I know you like pictures.

[Aperformance]

last but not least...

[Aperformance]

Sorry just two more...

[Aperformance]

last one!

[timgco]

That's quite the setup. That is the first system I have seen the muffler not mounted all thte way out back. Do you include a heat shield for the new location of the muffler? The exit pipes look to tucked up in there more than the other exhausts I have seen. Not that I expect a huge increase in HP/ torque, but I would be interested to those numbers. Also what the DB level is @ WOT and 65 cruise for interior/ exterior.

The price is par to the others out there as well. How many have been installed? Does this system hit/ touch metal anywhere. It looks to be very close in quite few spots. that would casue that anoying rattle that I used to get on my Tahoe. I pesonally am looking for a system taht isn't too loud inside, but has some bark to it @ WOT. Looks good.

[Aperformance]

Originally posted by timgco:
That's quite the setup. That is the first system I have seen the muffler not mounted all thte way out back. Do you include a heat shield for the new location of the muffler? The exit pipes look to tucked up in there more than the other exhausts I have seen. Not that I expect a huge increase in HP/ torque, but I would be interested to those numbers. Also what the DB level is @ WOT and 65 cruise for interior/ exterior.

The price is par to the others out there as well. How many have been installed? Does this system hit/ touch metal anywhere. It looks to be very close in quite few spots. that would casue that anoying rattle that I used to get on my Tahoe. I pesonally am looking for a system taht isn't too loud inside, but has some bark to it @ WOT. Looks good.

Thanks for your comments and questions... There is no heat sheild required our exhaust chamber is located right where the OE resonator had been installed.

The noise level inside the cab is pleasent with no cabin resonance to speak of. Our open chambered tip design helps eliminate drone by letting air enter the tip through a scoop creating a vaccume at idle and a ram air effect with speed. The resulting veturi effect helps scavenge exhaust while canciling out the pulses that help create Cabin resonance.

We've installed close to 20 systems for a local Hummer dealer and I can assure you there is no clearance issues what so ever.

Again this system has bark but no bite. I'll be posting new video soon with inside crusing, idle, start-up, drive by's and launches.

[timgco]

Originally posted by Aperformance:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by timgco:
That's quite the setup. That is the first system I have seen the muffler not mounted all thte way out back. Do you include a heat shield for the new location of the muffler? The exit pipes look to tucked up in there more than the other exhausts I have seen. Not that I expect a huge increase in HP/ torque, but I would be interested to those numbers. Also what the DB level is @ WOT and 65 cruise for interior/ exterior.

The price is par to the others out there as well. How many have been installed? Does this system hit/ touch metal anywhere. It looks to be very close in quite few spots. that would casue that anoying rattle that I used to get on my Tahoe. I pesonally am looking for a system taht isn't too loud inside, but has some bark to it @ WOT. Looks good.

Thanks for your comments and questions... There is no heat sheild required our exhaust chamber is located right where the OE resonator had been installed.

The noise level inside the cab is pleasent with no cabin resonance to speak of. Our open chambered tip design helps eliminate drone by letting air enter the tip through a scoop creating a vaccume at idle and a ram air effect with speed. The resulting veturi effect helps scavenge exhaust while canciling out the pulses that help create Cabin resonance.

We've installed close to 20 systems for a local Hummer dealer and I can assure you there is no clearance issues what so ever.

Again this system has bark but no bite. I'll be posting new video soon with inside crusing, idle, start-up, drive by's and launches. </div></BLOCKQUOTE>

Sounds good. What dealer have you sent these to already?

[Aperformance]

Weseloh and Sons Chevy/Hummer
San Juan Capistrano, CA

They Pre Install about 20 systems a month on Tahoe's, Suburban's, Avalanche's, 1500's, 2500's, and Hummer H2 & H3. They really helped put us on the map here in SoCalwhen we first started out. There a great dealer to do business with.

[Ely]

the tips look a tad small, dont ya think?

http://www.elcova.com/infopop/emoticons/icon_wink.gif

[Aperformance]

Originally posted by Ely:
the tips look a tad small, dont ya think?

http://www.elcova.com/infopop/emoticons/icon_wink.gif

The tips are 3.5" dia. and angled down slightly to give more clearance when off road... Our H2 tips are 4"dia. so naturally the baby Hummer's tip should be a tad smaller...

[Aperformance]

Baby Hummer!

[Edspad]

What is the projected cost of this system (under a group rate) and is this a bolt on mod. ?

[Aperformance]

Originally posted by Edspad:
What is the projected cost of this system (under a group rate) and is this a bolt on mod. ?

We'll probably offer a 15% discount so roughly $765.00 plus shipping...for the H3. The system is a bolt- on and requires cutting with a sawzall. A very simple installation.

[Steve - SanJose]

Let us know if a one of the Bay Area dealerships starts carrying your system so we can check it out.

Thanks.

[Aperformance]

Originally posted by Steve-SanJose-H3:
Let us know if a one of the Bay Area dealerships starts carrying your system so we can check it out.

Thanks.

Would you or anyone else be interested in testing the New Zoomers Cat-Back for the forums/ We'd make it worth your while...Please contact me or post here if your interested. Or better yet call me so we can discuss the details. Ron 949-916-3240

[Ely]

check it.
900 bucks installed

Remus Muffler
4 Sebring Chrome tips WITH resonaters

WENT OFF-ROADING WITH IT TODAY AND THEY DIDNT GET IN THE WAY AT ALL.

[Aperformance]

As promised new H3 Zoomers exhaust video, better late than never:

www.zoomersexhaust.com/video_h3/ (http://www.zoomersexhaust.com/video_h3/)