PDA

View Full Version : Installing the Chrome (aluminum) cross bows.

HUMRCHIC
02-05-2006, 04:50 PM
OK, I want to get the cross-bows, are these hard to install or should I go to a dealer. Thanks
HUMRCHIC
02-05-2006, 04:50 PM
OK, I want to get the cross-bows, are these hard to install or should I go to a dealer. Thanks
DarthKarl
02-05-2006, 06:13 PM
No reason to go to the dealer for that. It's easy, anyone can do it.

The only thing you might need is another warm body to help you get the bows up on the roof and into the rails. Then pop off the rail end-caps and slid the bows into the rails. You then lock the bows into place and put the end-caps back on and you're done.
fourfourto
02-05-2006, 06:31 PM
Its easy mine were put on at purchase but they didnt put the loop hole pieces in.You must take rails off to put loop holes in It took 5 minutes.I did it by myself ,it would be easyer with two.


Below is link to installs someone put up .I recomend saving location lots of info.


Link to installs (http://www.rausite.com/hummerh3.htm)