Got all 5 files, thanks Max!

Ric

Could you forward out the files to ali@kalantarproperties.com or does anyone out there who produced these want to sell them?

Busted!

Hummer Man's original post?:

http://elcova.com/groupee/forums?a=tpc&s=2826088551&f=6706011751&m=783601175 1&r=7836011751#7836011751


posted 11-03-02 06:18 PM
Lots of new aftermarket goodies for H2 showing up online and on EBAY.
Item #1395436050 is a Hummer H2 Rear window spoiler available in black or painted to match your H2. at $350 it seems kinda pricey. Prices on this type of item should come down in the future.

Regards, The "hummer guy"

It is very prophetic....

I wanted to make my rear bumper letters really stand out, and I didn't want to spend 60 to 100 dollars for them. I decided to just cut out my own, from white reflective tape. Using an Exacto blade and a little care, it really wasn't too hard.

The only problem was I couldn't locate 3" wide, white reflective tape.
So, instead, I did locate some 1.5" wide tape.
At first I figured I'd just butt up one edge to the other and trim to suit.
Turned out it was much more trouble than it was worth. So I just laid down the "bottom half" of the letter, and trimmed it to fit into the recess of the individual letter. The 2nd piece I laid in, just over lapped the bottom, and I trimmed it to the edges of the letter.

The result is a very nice looking standout HUMMER lettering that is white in the daytime (matches my white H2) and at night, when headlights hit them they really stand out.

I finally got around to taking a picture of my rear bumper with the camera flash illuminating the white reflective tape that I put in the rear bumper HUMMER lettering indents.

There is no outside lighting here, it is all from the camera flash. Those letters really stand out, which looks good (IMO), day or night, on my white H2. And that glowing look happens from any angle that the light comes from, because of the reflective nature of the tape.

Hi
I have a wire EDM machine. Can you send me the .dxf or .dwg file?

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Black 05:
I have a wire EDM machine. Can you send me the .dxf or .dwg file? <HR></BLOCKQUOTE>

Who are you addressing that to?

A "wire EDM machine" appears to be a Wire EDM (electrical discharge machining) which uses an electrically energized thin brass wire to slice through metal - including difficult-to-machine metals.

The compatible materials are: Steel, super alloys, titanium, aluminum, brass, and most metals.
I don't see TAPE mentioned. My guess anything like these plastic tapes might catch fire in a Computer Aided Machine (CAM) as this.

As for those file types or formats, I have found,
DXF = AutoDesk Drawing Interchange Format
DWG = AutoCAD drawing

Who here has said anything about any CAD program?

Now, if you were talking to me, I have no files regarding the letters I cut out. I just put the reflective tape in the indents and used an Xacto blade to cut to the edges of the letters. It took about an hour for all the letters, taking my time.

Chuck,

If you weren't so adept at drudging up old threads as well as blinded by your own *******ness you would get this.

Go back and read the thread and you will understand why Black05 posted what he posted, since I don't think anyone here is interested in your cut-n-paste reflecto-tape.

****, if you are going to bring old threads back to life at least read them.

Black 05, you have mail at your elsasser@mts.net address you list in your profile.

THANKS!! I will cut out a set in the next few days.

Gee whiz Paragon, I do apologize when I find I said something wrong or inappropriate. I was the one who resurrected this "dead" post by mentioning something I found useful. Black 05, if I offended you, in any way, I apologize.

Looking back on the thread, I see that 8 and 9 months ago the posts were in regards to the CAD files. So I now understand what Black 05 was talking about. However it would have been more immediately understandable if Black 05 had started his post with a name, since he was "talking" to someone nearly 20 posts ago (and on another page). It just makes for more understandability.

I simply asked Black 05 who was he addressing, and I explained what my thinking was. What's wrong with you?

Paragon, I don't understand your volatility, your immediate need to start name calling and cursing. Have you ever seen a therapist? I think you may have anger management issues. Do you often drive with this anger? Please calm down.

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by ChuckE:
Paragon, I don't understand your volatility, your immediate need to start name calling and cursing. Have you ever seen a therapist? I think you may have anger management issues. Do you often drive with this anger? Please calm down. <HR></BLOCKQUOTE>My post had as much volatility as a ant fart. Where did you get anger from my post? Why is it that pointing out the obvious is seen as angry? I apologize if my cursing offended your delicate sense of self........****!