Hummer Forums by Elcova
Page 2 of 2 < 1 2
Show 40 posts from this thread on one page

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   General H3 Discussion (http://www.elcovaforums.com/forums/forumdisplay.php?f=23)
-   -   My shields are falling off (http://www.elcovaforums.com/forums/showthread.php?t=25288)

usetosellhummer 05-09-2007 05:31 PM
Re: My shields are falling off
 
it's magic, one fell off after oil change and the other I found barely on?
Hmmmm

SR1355 05-09-2007 05:33 PM
Re: My shields are falling off
 
Quote:
Originally Posted by f5fstop
Engine Shield: GM Part Number 15819134
Oil Pan Skid Plate: GM Part Number 15094870
Shield bolts from front to rear:
Engine Shield Front Bolts: M8x1.25x30 (GM Part Number 11609733)
Engine Shield Rear/Oil Pan Skid Plate Front Bolts: M8x1.25x35 (GM Part Number 11589407)
Oil Pan Skid Plate Rear Bolts: M8x1.25x30 (GM Part Number 11609733)

Torque for all engine/trans shield/plate bolts: 20 N?m (15 lb ft)

Transfer Case Shield: GM Part Number 15091301
Bolt: M8x1.25x25 (GM Part Number 11515757)

Torque for transfer case bolts: 30 N?m (23 lb ft)


All bolts are rated 10.9 (medium carbon/carbon alloy/carbon boron steel. Rockwell Hardness: Min C33/Max C39.

Thanks for the info, I'll pick up a few extras for the road... I mean trail...:beerchug:


All times are GMT +1. The time now is 12:25 AM.
Page 2 of 2 < 1 2
Show 40 posts from this thread on one page

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.