Re: Spring hanger/shock mount skid plate
 

I went up there Thursday and the owner was "in training" on the laser with a rep. Word was he was tooling up another machine. I was told he would have me two sets of prototype to install and check out next week. Dont hold your breath. This is the best way to make large quantities and keep the price down. The guy just overloaded his ass with work. Reminds me of micro management when I "was" working for someone in a galaxy far far away thankfully that's over.:popcorn:

Re: Spring hanger/shock mount skid plate
 

Steel shipment came in. I went by today and 30 sets are cut out. They are in line for the break press and then to the welder. Anyday I will post a picture of the big pile when I actually have them and then send out info to those on my list. Its happening!!!!!

Re: Spring hanger/shock mount skid plate
 

Bring it on!

Re: Spring hanger/shock mount skid plate
 

Put me down for a set please. What do you think the ETA is?

Re: Spring hanger/shock mount skid plate
 

As usual they will not say. I go in there and see the pallets of product so they are turning out a lot of things. Im hoping it will all get bent Wednesday and Thursday and hopefully get the welding done first part of next week. This has been a long process because of their production schedule. Im just glad he worked it in, finally. It was a little sideline product for them. I got you down. Im getting close to the number spoken for equal to the number I had made. I expect some may drop out. After all this happens I might get another small run made. I want some extra in case somebody "abuses" one ha ha

Re: Spring hanger/shock mount skid plate
 

Pssst if you read this I may have some good news tomorrow. Stay tuned

Re: Spring hanger/shock mount skid plate
 

I've heard this before. :D JK!

Cool, I'm looking forward to slapping those babies on!

Re: Spring hanger/shock mount skid plate
 

Well I actually touched them today! They said, hmmmm, they would weld them tomorrow and stamp the front ones. I will post a picture of them piled up and then get addresses from everyone. You are on the list my friend. Stay tuned.

Re: Spring hanger/shock mount skid plate
 

They say a pit-chure is worth a thousand words. Im not sure I know a thousand words anymore so here.

1secondwind@comcast.net
email your physical address to receive UPS ground
Cashier's check for $150 (I will send my address to those that reply)
I will send out to the guys that spoke up first and go till I run out.

Finally! Git-er-done slap um on. I will include some suggested procedures.

Re: Spring hanger/shock mount skid plate
 

I welded my front ones on today and Im going out to test them in the outdoor lab.

Re: Spring hanger/shock mount skid plate
 

They can be welded on the outside edge and front. I will see if I can tear one off. Ok I will quietly disappear now thanks.

Re: Spring hanger/shock mount skid plate
 

THAT'S GREAT!! I will send you a check in the morning, can't wait to get these on.

:beerchug:

Re: Spring hanger/shock mount skid plate
 

HELLZ YEA!!!!!

DO IT UP!

Thanks for the work.

Re: Spring hanger/shock mount skid plate
 

I found one oddity. The frame is high strength steel, a good thing. It really needs to be TIG welded. You can use MIG but have to really crank up the heat and do it in little bursts. It's a square wave queer ion polarity gey molecules thingy and there will also be an eclipse of the moon this weekend, Im not sure what that has to do with welding but I know it is an unatural act to hold a live wire between an endless power supply and ground!! Then squirt inert gases at the same time. DISCONNECT THE NEGATIVE BATTERY LEAD FIRST!
I just blinged my front ones with silver paint and Im running over to Superlift to shoot some pictures and do some field testing, I love my job!!
Did I mention DISCONNECT THE NEGATIVE BATTEY LEAD FIRST??

Re: Spring hanger/shock mount skid plate
 

See all the testing I do. I usually try to miss these lines but here I am trying to be in the wrong place! ha ha I must go back tomorrow I need to guide so maybe I can lead some Jeeps thru here and see what happens.

Re: Spring hanger/shock mount skid plate
 

PM sent!:beerchug:

Re: Spring hanger/shock mount skid plate
 

I called my service manager for suggestions when I welded up my UCP, he said to disconnect the POSITIVE battery cable & let it sit for 15 minutes so the modules do an auto shut down. Don't bake your system!!!

Nice job Hunner, can't wait to get mine on!

Re: Spring hanger/shock mount skid plate
 

DId you get my PM?

Re: Spring hanger/shock mount skid plate
 

You have to be careful because they make you feel bullet proof after running nekked for so long. You might do something crazy!!!!

Re: Spring hanger/shock mount skid plate
 

Yah I thought I replied but I just did again.
Im going to Sedona Thursday and maybe stop by Moab for a snow run the next weekend. I may have to take vitamins.