Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   DRLs on with Parking Lights. It works. (Pics) (http://www.elcovaforums.com/forums/showthread.php?t=11346)

Sportsdude 09-30-2005 05:43 AM

Anyone have problem with DIC saying "turn signal on" after doing this mod? Mine comes on when I did this mod. I have the DRL come on with low headlights.

dochummer 09-30-2005 08:41 PM

nope. Checked the jumper settings?

Humdingah 10-09-2005 06:52 PM

I decided to do this to my truck the other night and, while I had the soldering iron out, I made a total of three jumper wires with diodes. I obviously only need one of these so the first two people to PM me with their address will each get one. The diodes are soldered to black wire on the 'feed' side (the side that goes to the parking light, low or high-beam relay) and red on the side that goes to the DRL relay. They're heat-shrinked and long enough to allow you to attach to any of the three aforementioned 'feed' relays...just cut to size and be on your way.


tomp 10-10-2005 01:37 PM

I think I am going to have my DRLs wired to a switch so I can trun them on at any time.

For those interested, I have seen the DRL bulbs available in yellow so they can be used as fog lamps.

DeBest 10-24-2005 09:41 AM

Alright, I have just read the last 5 pages of updates and I am more confussed than when I started. If someone can summerize what I need to do I would really appreciate it. I have an 06 that I just want to add the DRL to the auto function for use with the Headlights. During the day I would like them to opperate as they do normally without any additional lights or markers on. Lastly can anyone tell me what they would reccomend if I want to upgrade to a brighter DRL and Headlamp without the cost of the HID's. What DRL bulb would compliment the Silverstar Headlamps?

DeBest 10-24-2005 08:29 PM

CAUTION CAUTION CAUTION, I tried the jumber today on a 06 H2 exactley as outlined with the jumper and the diode. Worked for about 30 seconds and then it started spitting and sputtering and stopped running. Tried restarting it several times had to have it towed into Hummer they said that it has fried the ECM. This vehicle only has 380 miles on it. They will not warranty it, I ll know tommorrow what it is going to cost. Has anyone had anything like this happen. HELP!!!

Fastest H-Town Realtor 10-24-2005 11:15 PM

Bummer about the fried electro-BBQ. Methinks you did not do it correctly, unless AMGen redid the box. Even then, the schematic should have shown you the correct slots.

DeBest 10-24-2005 11:44 PM

Does anyone know if the Fuse box did indeed change from 05 to 06?

Aubs 10-24-2005 11:51 PM

No idea on the fuse box, sorry to hear about that though. I just tried this mod, and it worked successfully. The one wire keeps the DRL's on at all times, even with High beams. Now, I just have to get some serious DRL bulbs and get rid of the sissy stock ones!

Adam in CO 10-25-2005 12:06 PM

Quote:

Originally posted by xAlt:
I did this mod in Jan 03 and it's still working.

I did this mod in Jan 03 and eventually needed a new fuse panel.

OrangeCrush 10-25-2005 11:05 PM

Quote:

Originally posted by DeBest:
CAUTION CAUTION CAUTION, I tried the jumber today on a 06 H2 exactley as outlined with the jumper and the diode. Worked for about 30 seconds and then it started spitting and sputtering and stopped running. Tried restarting it several times had to have it towed into Hummer they said that it has fried the ECM. This vehicle only has 380 miles on it. They will not warranty it, I ll know tommorrow what it is going to cost. Has anyone had anything like this happen. HELP!!!

Man, have you found anything out? Did you mistakenly place the wire incorrectly? I was going to do this (even made up the diode) but not until I find out what happened.

Keep us updated please.


Mark

PS. My bodyshop does alot of business with the local Hummer dealership. I don't know if it'll help but get your price and I'll see it I can get it for your cheaper. Right off the bat my shop gets 25% off list, if I have a problem child, they usually help us.

PM me if I can help.

Mark

DeBest 10-26-2005 12:02 AM

Quote:

Originally posted by OrangeCrush:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by DeBest:
CAUTION CAUTION CAUTION, I tried the jumber today on a 06 H2 exactley as outlined with the jumper and the diode. Worked for about 30 seconds and then it started spitting and sputtering and stopped running. Tried restarting it several times had to have it towed into Hummer they said that it has fried the ECM. This vehicle only has 380 miles on it. They will not warranty it, I ll know tommorrow what it is going to cost. Has anyone had anything like this happen. HELP!!!

Man, have you found anything out? Did you mistakenly place the wire incorrectly? I was going to do this (even made up the diode) but not until I find out what happened.

Keep us updated please.


Mark

PS. My bodyshop does alot of business with the local Hummer dealership. I don't know if it'll help but get your price and I'll see it I can get it for your cheaper. Right off the bat my shop gets 25% off list, if I have a problem child, they usually help us.

PM me if I can help.

Mark </div></BLOCKQUOTE>


Mark if you can get me a price on the ECM I would appreciate it. I told the dealership that I will tell them by Friday what I am going to do. I still can not believe there isn't some way they can warranty that part. If you can PM me as soon as possible I would be very appreciative

OrangeCrush 10-26-2005 12:09 AM

PM sent.

HummBob 10-26-2005 01:35 AM

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213906&chapter= DR1GP03&appSectionid=2413&groupid=2424&subgroupid= 3833&componentid=0&make=1000&model=H2&year=2004&gr aphicID=GP03175&callout=1&catalogid=2

Not sure what you were quoted. But this may be cheaper?

OrangeCrush 10-26-2005 04:15 PM

Not sure if this helps but here it is.

The PCM for an '06 at my cost is 318.00

If I can help you, let me know.... it lists for 585.00

Mark

DeBest 10-26-2005 07:26 PM

Mark,
Thank you for the price on the ECM, can you find out how many hours the book calls for the replacement of the modual I am trying to get a total price. This way I will be much better prepared when I talk to the dealer on Thursday.

Thanks Again!!!

dochummer 10-26-2005 08:31 PM

Ok, I haven't actually replaced the pcm in an H2 before...but it's not that hard is it? I've replaced pcm's on other vehicles and it was a matter of disconnecting cables, and swapping it out....

OrangeCrush 10-26-2005 10:28 PM

I'll check tomorrow but I honestly can't see it taking very long. Most ecm's only take a few minutes to replace. Sometimes you may have to remove some bracketry/battery/brace to get to it but I couldn't fathom it costing more than an hours labor.

However, I will check tomorrow.

Mark

DeBest 10-27-2005 01:06 AM

I was told that the ECM on a 06 H2 is up under the dash behind the instument panel and that it is quite involved to get to it. I was told that the whole dash practically has to come off to get to it. I hope someone can tell me exactly where it is and how many hours the book calls for to replace it.


All times are GMT +1. The time now is 06:07 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.