Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Photos of YOUR H3 (http://www.elcovaforums.com/forums/forumdisplay.php?f=25)
-   -   Roof Dent (http://www.elcovaforums.com/forums/showthread.php?t=14633)

HummerNewbie 03-27-2006 12:45 PM

1 Attachment(s)
I noticed right after I got my H3 that there was a dent in the roof. Was going to mention it to the dealer but forgot about it. Today outside my office was another H3 and I noticed it had the same dent in the same spot. You only notice it if you are above the vehicle. Does everyone have this dent?

HummerNewbie 03-27-2006 12:46 PM

1 Attachment(s)
Is this you Lotus? It is outside my office in Lake Mary.

fourfourto 03-27-2006 12:53 PM

That sucks I would have it fixed asap(hope they can).
You should have told them originaly,they might tell you it happened after you left dealer.
Good luck.

I have a view of my roof through my window no dents yet.

nmikes 03-27-2006 12:58 PM

Looks like someone dropped something while it was getting unloaded/loaded from the delivery truck... definately should get fixed by the dealer.

HummerNewbie 03-27-2006 01:05 PM

I agree, should have told them immediately. I just find it very odd that the H3 in the photos above has the exact same dent in the exact same location. The reason I forgot to tell the dealer in that you never see it unless you are above the vehicle.

timgco 03-27-2006 01:08 PM

...nothing a GOBI rack could't hide. LOL.

Ma\'Deuce 03-27-2006 01:13 PM

hey Newbie, i've got the same dent in the same spot. because i've seen more than one in the same spot, i suspect the shipping rack or tooling at the asm plant. i saw the same dent from my bedroom window the other day and went down to check it out and it was gone!! your right, you don't see it unless your above it. you don't feel too much of a "low" in that area, i wonder if it's characteristic of the sheet metal? if it was "oil canned", it would just pop out, but it doesn't seem to want to move. did you run your hand over it? how much of a low do you feel?

HummerNewbie 03-27-2006 01:19 PM

Quote:

Originally posted by timgco:
...nothing a GOBI rack could't hide. LOL.

Definitely would. Just need a big discount on one

HummerNewbie 03-27-2006 01:23 PM

Quote:

Originally posted by Ma'Deuce:
hey Newbie, i've got the same dent in the same spot. because i've seen more than one in the same spot, i suspect the shipping rack or suction cups at the asm plant. i saw the same thing from my bedroom window the other day and went down to check it out and it was gone!! your right, you don't see it unless your above it. you don't feel too much of a "low" in that area, i wonder if it's characteristic of the sheet metal? if it was "oil canned", it would just pop out, but it doesn't seem to want to move. did you run your hand over it? how much of a low do you feel?

I always forget to check it out. I will try to take a closer look at it later today.

Ipedog 03-27-2006 01:40 PM

I'll go out and check later on this AM. Hmmm....

Ma\'Deuce 03-27-2006 02:47 PM

I like the gobi rack idea. maybe the dealerships will give discounted prices on....naa, that's just stupid . If the fix is long turnaround, i'm leavin it. if it's on all of em, we should get somethin other than a "sorry bout that" from gm. however, with the train wreck gm is in right now, i doubt they'd even say sorry.

HummerNewbie 03-27-2006 04:31 PM

I just climbed up to get a closer look and you can't even see it up close. I just look real quick but nothing.

H3wannabe 03-27-2006 05:19 PM

This may be a really dumb question, but are you sure that the dent is there? If you study the pic long enough, it appears that the reflections from the tree could be creating the illusion of a dent.


H3wannabe

HummerNewbie 03-27-2006 05:30 PM

It is there. The H3 in the pic is someone elses that is parked out there today. Mine is parked in another location and you see the same dent.

DarthKarl 03-27-2006 06:38 PM

Quote:

Originally posted by Ma'Deuce:
i suspect the shipping rack or suction cups at the asm plant.

That's my guess as well. A number of years ago, a co-worker had what looks like a similar circular dent. I believe the explanation was that it occurred at the plant when the body panel was lifted by a jig.

bmoser1 03-27-2006 06:38 PM

do you both have sunroofs?

HummerNewbie 03-27-2006 06:45 PM

Quote:

Originally posted by bmoser1:
do you both have sunroofs?

Both mine and the one pictured do.

DDWH 03-27-2006 07:04 PM

roof gremlins

Ma\'Deuce 03-27-2006 07:45 PM

yea i have the 50cal opening too. good thought ddwh. i've seen some sunroof processes/tooling that create odd shapes in the roof during installation. i don't think something struck it, but pushing, pulling, yankin, welding and stuff like that to ,essentially, a 4X8 sheet of steel, can create "lows" in the sheet metal. not uncommon and easy, in the process, to fix. once it's there and been painted though, theres little hope of fixing it. cept for bondo. someone from a body shop would know more than me though.

HummerNewbie 03-27-2006 07:52 PM

Apparently since I kept forgetting to tell the dealer it isn't really worth fixing to me

I guess I will see what they say when I have it in to check the marker lights and do the 3K service.

ShaggyX 03-27-2006 08:05 PM

Quote:

Originally posted by HummerNewbie:
Apparently since I kept forgetting to tell the dealer it isn't really worth fixing to me

I guess I will see what they say when I have it in to check the marker lights and do the 3K service.
Maybe you should just put down the crack pipe. That might help too.

fourfourto 03-27-2006 08:23 PM

I find you have to be a pain in the a s s and ask alot of questions, give them information they dont know(but do it nice without being a jerk) when you are at the dealer for service.

The day I picked mine up I stood on the steps and checked out the top,I dont know why I just did.


It wouldnt hurt to scan the H3's in the lot before going in.If theres any with same damage and they tell you no or it couldnt come from factory that way you could bring him outside.

HummerNewbie 03-27-2006 10:45 PM

Quote:

Originally posted by ShaggyX:
Maybe you should just put down the crack pipe. That might help too.

Maybe I will try that

HummerNewbie 03-27-2006 10:46 PM

Quote:

Originally posted by fourfourto:
It wouldnt hurt to scan the H3's in the lot before going in.If theres any with same damage and they tell you no or it couldnt come from factory that way you could bring him outside.

I will definitely do that.

HIHUMMER 03-27-2006 11:08 PM

Newbies TO DO list:
1) try to take a closer look at it later today.

2) see what they say when I have it in to check the marker lights and do the 3K service.

3) put down the crack pipe.

4) scan the H3's in the lot before going in.If theres any with same damage and they tell you no or it couldnt come from factory that way you could bring him outside

Are we forgetting anything else?

lotus4s 03-27-2006 11:17 PM

Quote:

Originally posted by HummerNewbie:
Is this you Lotus? It is outside my office in Lake Mary.

Not mine HN, but now you've got me searching for dents.......

HummerNewbie 03-27-2006 11:18 PM

Quote:

Originally posted by HIHUMMER:
Newbies TO DO list:
1) try to take a closer look at it later today.

2) see what they say when I have it in to check the marker lights and do the 3K service.

3) put down the crack pipe.

4) scan the H3's in the lot before going in.If theres any with same damage and they tell you no or it couldnt come from factory that way you could bring him outside

Are we forgetting anything else?

1 and 3 are already taken care of, but thanks

HummerNewbie 03-27-2006 11:19 PM

Quote:

Originally posted by lotus4s:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by HummerNewbie:
Is this you Lotus? It is outside my office in Lake Mary.

Not mine HN, but now you've got me searching for dents....... </div></BLOCKQUOTE>

Didn't figure it was. Will have to check, maybe one of our tenants got one.

Sorry to make you look for dents

Steve - SanJose 03-27-2006 11:24 PM

Dent looks like a buttock print , maybe somebody was using the H3 roof as a viewing platform.

S.

HummerNewbie 03-27-2006 11:28 PM

Quote:

Originally posted by Steve-SanJose-H3:
Dent looks like a buttock print , maybe somebody was using the H3 roof as a viewing platform.

S.

They sure get around then

lotus4s 03-27-2006 11:52 PM

Hard to tell for sure, but under the fluorescent light in the garage I can see a slight depression in the area you indicated.

Looks like that bish sat on my roof too....

MahBabyBlue 03-28-2006 12:03 AM

Nice color..

NEOCON1 03-28-2006 02:11 AM

does somebody play basketball by your trucks ? very strange bummer

timgco 03-28-2006 03:52 AM

checked both of ours and no dents on the roof. Both have sun roofs too.

Ma\'Deuce 03-28-2006 09:20 AM

Quote:

Looks like that bish sat on my roof too....

same bish sat on mine

X Racer 03-28-2006 11:59 AM

Try to call Dent Wizard
www.dentwizard.com

HummerNewbie 03-28-2006 12:06 PM

Maybe I never should have brought it up since nobody seemed to notice it before

NEOCON1 03-28-2006 12:17 PM

if it is a some what common problem it may be happening on the auto-haulers if these trucks were on lower level

lotus4s 03-28-2006 07:12 PM

I think it's something inherent in manufacturing or the sunroof installation as my dent is in exactly the same place as Ma'Deuce, right at the rear door line.

Is this the same for the rest of you guys?

HummerNewbie 03-28-2006 07:43 PM

That sounds about right to me. That is right where it is on the one I took the picture of and I believe where it is on mine. I dropped mine off late this morning to get the marker lights looked at and an oil change. I mentioned it to two of the service reps and they didn't seem to be aware of it. I was in a hurry so didn't get a chance to look at any of them on the lot. Will try to when I pick it up in a little while. I know the loaner I have doesn't have the dent but it also doesn't have a sunroof. One of the reps mentioned that they have seen the same type of thing on the rear door of H2s.

Got to stop and put gas in the loaner before returning it. I will look for you lotus since I will most likely stop right by your place.


All times are GMT +1. The time now is 12:20 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.