|
Hello... It's all Viet Nam Vette's fault...
1 Attachment(s)
New kid on the block here and it's all Viet Nam Vette's fault that I now own a 2006 H3.
You see, I was perfectly happy with my old 1996 Dodge 4X4 pickup. The Cummins turbo diesel is bulletproof, plenty powerful and cheap to run. Then Viet Nam Vette starts talking about buying a Hummer H3 on another forum we both participate in called the Corvette Action Center. He's got one on order, he says, and he's pretty excited about it. So I started looking at H3 pictures and saw a few of them on the road. Then I'm driving past a local non-Hummer dealership and they have a bright yellow 2006 H3 sitting out front where you can't miss it. The next thing I know, I'm being handed a set of keys. I'm normally a pretty logical guy. I usually make my car buying decisions based on solid cost/benefit analysis. This time it was straight from the heart or maybe even a bit lower. The funny part is my wife absolutely loves it... even if she doesn't get to drive it... So here's my introduction... I'm in the greater Vancouver area in lovely British Columbia, Canada. I see there's a couple of others here from my area. The user name Mac was already taken (go figure!) but I managed to work my way around that. I'm a police officer but don't let that bother you. I haven't arrested anyone I've met on a forum yet. VNV didn't tell me that the H3 had head problems until after I bought one. He seems to think there's a recall. As soon as I finish this post, I'm gonna go search to see if I can find it. -Mac |
Re: Hello... It's all Viet Nam Vette's fault...
Welcome aboard Mac.
|
Re: Hello... It's all Viet Nam Vette's fault...
[
Welcome, and thank you for being in Police officer, so many avoid that carreer now because of the lack of respect. But I am very thankfull of ppl like yourself. |
Re: Hello... It's all Viet Nam Vette's fault...
Yeah ..It's my fault....:clapping: ..I think the H3 sold it's self. Anyway welcome aboard MAC.
The recall I was explaining was the Cyl Head thing.. Can't remember if there was an autherized factory recall or not. Mac's doing a search now..anyone want to add any info for him?? |
Re: Hello... It's all Viet Nam Vette's fault...
Thanks for the welcome! K9sH3, thanks. I've been carrying the badge for 18+ years and it's been a wild ride but I'm planning to make full use of the RCMP retirement package at the earliest opportunity.
VNV, I found a thread which looked like a single incident of a head problem but nothing about a recall. The thread originator spent a good bit of time fending off accusations of being a troll but I see several of the parties involved are now banned. Incidently, I just got a phone call from the dealership saying there's a recall for the jack, so I'm taking it in on Thursday. I hope if there was a recall for the head, they would have found that as well. -Mac |
Re: Hello... It's all Viet Nam Vette's fault...
Heh Mac....I'm sorry I had a brain Fart on this Cyl head thing.. But I'm sure some one will jump in here and square this away. Not sure if it was a recall or a wait till the head goes thing then GM will replace it or not answer.
So sit tight and one of the Hummer Rock Jumper's will chime in..:D |
Re: Hello... It's all Viet Nam Vette's fault...
In the meantime, I'm going to keep an eye on everything to be sure it's all good.
-Mac |
Re: Hello... It's all Viet Nam Vette's fault...
did you ever get your truck nam?
|
Re: Hello... It's all Viet Nam Vette's fault...
Mac,
Congrats on the new H3. Yea my purchase was not based on the usual logic and cost analysis. Although I did the math on additional gas cost per month ($30, bfd) versus my prior vehicle. S. |
Re: Hello... It's all Viet Nam Vette's fault...
Any chance you could change your call sign?
Like, at least at a 'k' to the end or something. The last Mac that was here kinda soiled the place and you might unwittingly get confused as him. |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
I'm rather accustomed to being Mac, not only because that truly is my nickname but also because I'm involved in other forums. As such, I would prefer to stay with it if I can. If it becomes a problem, I'm sure I'll hear about it so I'll cross the bridge when/if I encounter it. Incidently, I haven't figured out the local vernacular as yet. Are you a moderator or ??? -Mac |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
You know I typed an answer to this post 3 times and it dumped!!!!! Lets see it this will post |
Re: Hello... It's all Viet Nam Vette's fault...
what es a moderator....
we don hav no stinkin moderators round chere There's a group of Bully H3 owners that are "Hummer Veterans" that stir up a lot of the trouble and create general mayhem... stay clear of them and you might survive this insane asylum:giggling: ;) |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
Ok.this is my 4th attempt..so it will be a short form of the other 3. Dealer Lied...Told me marker lamps were in production along with my rig. Called GM ..Gave them the order number.. They said ..That number is bogus ..no order in our system fo that dealer. GM calls dealer... Dealer Calls me and starts to yell at me for calling GM. I tell dealer ..Go F your self and Go Pound sand.. Are you stupid...?? I was going to hand you a Check for $40 Grand and you yell at me?? Screw you..reverse the charge on my Credit Card Deposit and refund it. This is 14 weeks into the deal. Two days later credit showed up. Marker Lamps as of today should be available 1-8-07 if they pass Engineering test and Approval...So it's up to F5...:D Then I star all over again. Trouble is...you can't find an H3 with DVD nav and off road and Lux and Moon roof etc on the dealer lots... So I gotta order one in.. I want the freaken Marker Lamps...That's my story and I'm sticken with it..:D [/php] |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
-Mac |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
No cylinder head recall. Believe it or not, it does not happen to every engine out there.:D It also depends on the VIN of your vehicle. If manufactured prior to 287591 (Last six digits of the VIN) you could have the problem. So, if your VIN is after the VIN, then you have the new hardened head. If not, and you develope the problem, you will experience a rougher than normal idle, and then the service engine soon light will come on. Dealer will retrieve a P300 code, check compression, and if low, replace the cylinder head. (The I-5 engine already idles rougher than a V-block engine, so don't get alarmed if you feel a slight idle vibration.) I should also mention, that if it does happen, call Onstar and they will tell you to get to a dealer as soon as possible. However, if you happen to be out climbing rocks, running rivers, etc., don't fret. You can drive quite a few miles with this condition. Only harm that will happen is the valve guide that failed, will elongate more, causing more damage to the head. A few other valves might start to elongate, but no damage to the engine itself. The fix is a complete new designed hardened head, so don't worry about causing more damage to the head. |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
There yah go MAC..Right fron the Engineers Keyboard.. Thanks For that info F5..:perfect10s: |
Re: Hello... It's all Viet Nam Vette's fault...
Welcome to the board Mac. My H3 is at the dealer for a new head right now. I was in Edmonton Canada last month when my check engine light came on. The code onstar showed was loose fuel cap, change in fuel, ect.
So I kept driving. 2000 miles later dealer finds the P300 code and it's been over 1000 miles since I saw a check engine light. So I wouldn't worry about it too much. The code also didn't show up in the onstar diagnostic email I recieved the day before the dealer found the code. |
Re: Hello... It's all Viet Nam Vette's fault...
Gawd. Another Mac.;)
|
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
-Mac |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
-Mac |
Re: Hello... It's all Viet Nam Vette's fault...
SWEET!!!:perfect10s::perfect10s::perfect10s:
an non-troll new member. |
Re: Hello... It's all Viet Nam Vette's fault...
Since collecting the new beastie, the kids have refused to ride in my wife's grocery getter. It's all good. Oops! Almost time to go collect my son from his high school extra-curricular activities.
-Mac ps: The previous owner stuck what looks like a polished stainless muffler & tailpipes under my H3 as well as a K&N filter and custom 'open' airbox. I presume he/she was hoping for a bit of extra highway grunt. A less restrictive exhaust system should boost my MPG but I'm not sure about the K&N. Thoughts? |
Re: Hello... It's all Viet Nam Vette's fault...
2 Attachment(s)
Attachment 34037Welcome Mac! The RCMP kicks butt. So do people up your way really call each other nobs and hosers? Or do I watch to many old McKenzie Brothers movies? Nice to have you with us, eh?
Attachment 34038 |
Re: Hello... It's all Viet Nam Vette's fault...
It won't hurt, probably gained 5HP:giggling:
|
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
does the head issue involve '06 and '07 h3s? |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
Inside joke...:) |
Re: Hello... It's all Viet Nam Vette's fault...
Hello Mac welcome to the club. I'm sure you'll love your Hummer. I.m also a Canadian but way down at the bottom near Windsor Ont. Regards The Rebel
|
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
Thanks for the warm welcome, folks! -Mac |
Re: Hello... It's all Viet Nam Vette's fault...
1 Attachment(s)
Quote:
Yes, there is a recall on the jack. Here's a pic of the new one: Attachment 34056 |
Re: Hello... It's all Viet Nam Vette's fault...
Told You Mac....This ain't like the Corvette Action Center...:D
These Chick's & Dick's here are a little dizzy from jumpen rocks and slingen mud with there rigs... But they do tell it like it is... Refreshing isn't it....??:popcorn: |
Re: Hello... It's all Viet Nam Vette's fault...
Welcome aboard Mac!
And don't pay any attention to the H2 troublemakers here as they suffer from H1 Hummer envy and have to take it out on their little brothers. Just stick to the H3 forums and you'll be fine....:jump: :jump: |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
I had an expensive and ultimately unproductive day. I took my H3 to the local dealership for the recall. My new jack doesn't resemble the model demonstrated above (more's the pity) but it was free. The expensive part came when I purchased a second key and fob because the H3 only came with one of each and the fob wasn't working. I know Canadian "loonies" aren't on par with the almighty greenback but I laid down a bunch of 'em. They cut & programmed the new key and then programmed both the new fob and the old fob which was apparently transmitting but not sync'd. When I left the dealership, the fobs were working. When I arrived at my next destination... they weren't. :( I called the dealership and (of course) they stand behind their work but this means another 30 mile trip into town. To top it off, I was hoping to meet with DennisAJC for coffee but he either wasn't available or something because he didn't answer or return my call. Ah well... I have an excuse to go for a drive in my new toy!! -Mac |
Re: Hello... It's all Viet Nam Vette's fault...
Corvette forum used to rock....a few years ago, we got into blue LED replacements and had a dozen people going crazy.:jump: Off topic was a hot place to visit.
|
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
Corvette Forum still does rock if your into C2 C3... Now I just cuz the C1 C2 C3 section. The place to go also for some fun is the Corvette Action Center. The "Off Road Lounge is Relaxing. Or the "Road Kill Lounge":D |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
-Mac |
Re: Hello... It's all Viet Nam Vette's fault...
Quote:
Chicks and Dicks.......? BAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA!!! |
| All times are GMT +1. The time now is 12:46 PM. |
Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.