Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   General H2 Discussion (http://www.elcovaforums.com/forums/forumdisplay.php?f=6)
-   -   Alpha badge - Emblem (http://www.elcovaforums.com/forums/showthread.php?t=31336)

marius 12-08-2007 10:12 PM

Alpha badge - Emblem
 
Does anybody know where I can find a Alpha Hummer emblem ?

My H2 is almost done with the Duramax conversion ( picking it up on the 14th this month) and I would like to have an Alpha badge for it.

Stats on the conversion - 2006 6.6L Duramax LBZ stock 365 HP, 6 speed Allison tranny, 4X4 / 2X4 transfer case, Banks Intercooler, cold air kit, 5 inch custom exhaust, increased rail fuel pressure mod, PPE eXcellerator 5 stage programmer, PPE Duramaximixer stacked, and PPE Boost controller, exhaust temp sensors and electronic boost gages, ATS Co-Pilot Tranny power module and pressure mod - clocking at 683 HP at the rear wheels and 1046 ft.lbs torque - I think it deserves an Alpha Badge.....

Where do I find one ? Can anybody help ?
Thanks.

Marius

KenP 12-08-2007 10:31 PM

Re: Alpha badge - Emblem
 
That sounds awesome! Be sure to post pics when you get it.

I'm sure the dealer can get you an Alpha badge.

Gooey Gaybob 12-08-2007 10:34 PM

Re: Alpha badge - Emblem
 
Quote:

Originally Posted by marius
Does anybody know where I can find a Alpha Hummer emblem ?

My H2 is almost done with the Duramax conversion ( picking it up on the 14th this month) and I would like to have an Alpha badge for it.

Stats on the conversion - 2006 6.6L Duramax LBZ stock 365 HP, 6 speed Allison tranny, 4X4 / 2X4 transfer case, Banks Intercooler, cold air kit, 5 inch custom exhaust, increased rail fuel pressure mod, PPE eXcellerator 5 stage programmer, PPE Duramaximixer stacked, and PPE Boost controller, exhaust temp sensors and electronic boost gages, ATS Co-Pilot Tranny power module and pressure mod - clocking at 683 HP at the rear wheels and 1046 ft.lbs torque - I think it deserves an Alpha Badge.....

Where do I find one ? Can anybody help ?
Thanks.

Marius


That sounds like a badass conversion. :beerchug:

Any thoughts on upgrading your rear axle? I have a feeling you might need some more beef back there with that much power.

cow boy 12-08-2007 11:11 PM

Re: Alpha badge - Emblem
 
Good job that will make your H2 very fun to drive . The PPE on stage 5 may be too much fun for the Ally-6. Have fun and post pics.

Agriv8r 12-08-2007 11:25 PM

Re: Alpha badge - Emblem
 
will check on a badge in the morning...

cow boy 12-08-2007 11:37 PM

Re: Alpha badge - Emblem
 
AVRV8R-I will take 3 badges also, if $ is right.

brad_p 12-09-2007 08:00 AM

Re: Alpha badge - Emblem
 
How much did this duramax conversion cost you?

marius 12-09-2007 11:47 AM

Re: Alpha badge - Emblem
 
I'll let you know once I have the final bill. I changed the shocks with reservoir Pro-Comp's, found a set a KatSkins and changed all the leather inside, Viper 5900SST alarm, powdercoated body color the bumpers, and others....

Marius

marius 12-09-2007 11:50 AM

Re: Alpha badge - Emblem
 
The PPE wil stay on level 3, the Duramaximizer adds about another 165 and the boost controller by adding another 20-25 psi when needed adds another 50-65.
That is whyy I went with the ATS Co-pilot but now I am thinking about an ATS torque converter. I do not plan to race it. I know I have the power when needed, the ATS should do the job in "normal" driving if there is such a thing...

Hummer Aficionado_VT 12-10-2007 04:11 AM

Re: Alpha badge - Emblem
 
Niiice. :D

Vettster 12-10-2007 04:19 AM

Sounds cool, but.......
 
You realize that this thread is WORTHLESS without pictures.:jump:

marius 12-10-2007 02:19 PM

Re: Sounds cool, but.......
 
I agree, can't wait to get it myself, I am flying out Wednesday night, pick it up Thursday and drive back 800+ miles back home.

Captain of the Titanic 12-10-2007 06:54 PM

Re: Alpha badge - Emblem
 
Damn... Something else I need to talk the wife into....

I don't really care what you had to pay for the conversion in cash, what did you have to give up for it with the spousal unit???? heh heh

:jump:

MVR 155 12-10-2007 07:26 PM

Re: Alpha badge - Emblem
 
Sounds like you are gonna have one of the baddest rigs around...... dying to see some pics :jump:

Badace 12-10-2007 08:55 PM

Re: Alpha badge - Emblem
 
Any news on the badge price?

marius 12-11-2007 04:56 PM

Re: Alpha badge - Emblem
 
Any news on the badge ?

Agriv8r 12-11-2007 05:55 PM

Re: Alpha badge - Emblem
 
sorry for the delay, 49 plus shipping....

timgco 12-11-2007 05:59 PM

Re: Alpha badge - Emblem
 
Quote:

Originally Posted by Agriv8r
sorry for the delay, 49 plus shipping....


$49 each? or for all three? $49 for all three would seem cheap though. How many ya got? ;)

cow boy 12-11-2007 07:10 PM

Re: Alpha badge - Emblem
 
For 3 emblems 49 +shipping I will due it. Count me in.

Agriv8r 12-11-2007 07:30 PM

Re: Alpha badge - Emblem
 
sorry, parts dept is saying they are listed at 58 each, he will sell them at 49 each plus shipping...

marius 12-11-2007 08:04 PM

Re: Alpha badge - Emblem
 
3M double sticky tape or drill ?
What is shipping to Granger IN 46530 ?

BTW, delay in picking it up, snow storm in Kansas this week, ice everywhere, postponed for 5 days....

M

Agriv8r 12-12-2007 01:10 AM

Re: Alpha badge - Emblem
 
LOOKS LIKE ITS ALL 3M....I wil Pm you the info....

HUMTECH 12-12-2007 04:34 AM

Re: Alpha badge - Emblem
 
you need a bumper sticker "Still burnin gas? You've just been Duramaxed"

tower 12-12-2007 04:57 AM

Re: Alpha badge - Emblem
 
Quote:

Originally Posted by cow boy
For 3 emblems 49 +shipping I will due it. Count me in.

X2!

CO Hummer 12-12-2007 02:14 PM

Re: Alpha badge - Emblem
 
Quote:

Originally Posted by marius
clocking at 683 HP at the rear wheels and 1046 ft.lbs torque


Wow! :eek: Can the rear axle handle that much torque?

marius 12-12-2007 09:01 PM

Re: Alpha badge - Emblem
 
I am sure I will find out real soon......
The guy doing the conversion changed the axles on his with the 3.73 gear ratios, runs it standard and claims over 900 hp with no problems.
The rear on our trucks are no wimps either. The set-up is the same as the HD2500 and those are abused all the time.

Lean Machine 12-13-2007 12:14 AM

Re: Alpha badge - Emblem
 
Quote:

Originally Posted by marius
I am sure I will find out real soon......
The guy doing the conversion changed the axles on his with the 3.73 gear ratios, runs it standard and claims over 900 hp with no problems.
The rear on our trucks are no wimps either. The set-up is the same as the HD2500 and those are abused all the time.


Who did your conversion?


All times are GMT +1. The time now is 09:57 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.