quote:
Originally posted by tomp:
Here is the email I got from Husky today:

I stopped by the Hummer dealership on Friday after Thanksgiving and the 2006
H2 is definitely different than the 2005 H2. I had an Engineer check this
part and they told me it was the same except for the run-off on the kick
panel (the area I had radius on the part). They also indicated that the wall
along the kick panel was snug, so I had that moved .350 inward. However,
this does not make the part fit. We will have to make a different tool to
accommodate all the necessary changes.

Has anyone gotten an update on these modifications on the mats. What exactly is available that WILL fit an 06 which is apparently different from 05 and earlier.

quote:
Originally posted by tomp:
Here is the email I got from Husky today:

I stopped by the Hummer dealership on Friday after Thanksgiving and the 2006
H2 is definitely different than the 2005 H2. I had an Engineer check this
part and they told me it was the same except for the run-off on the kick
panel (the area I had radius on the part). They also indicated that the wall
along the kick panel was snug, so I had that moved .350 inward. However,
this does not make the part fit. We will have to make a different tool to
accommodate all the necessary changes.

Has anyone gotten an update on these modifications on the mats. What exactly is available that WILL fit an 06 which is apparently different from 05 and earlier.

Hey Bro, they ended up sending me some of their regular mats for the front until they get their machine re-tooled for the '06 changes. I will update you as soon as I get the newly updated mats.

Tomp,
Do you have a phone number for Husky?

Thanks

DeBest, looks like they got the new 2006 liners ready. Steve has them in his office, but before they can ship he will need to do a confirmation on an actual H2 to ensure the fitment.

Here is a pic of what they look like:

Oh no, I just noticed that they made the indention on the wrong floormat! The indentation was suppose to be on the left side of the driver's floormat for the kick panel and they put it on the passenger side!

Oh well, back to the drawing board

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by tomp:
Oh no, I just noticed that they made the indention on the wrong floormat! The indentation was suppose to be on the left side of the driver's floormat for the kick panel and they put it on the passenger side!

Oh well, back to the drawing board </div></BLOCKQUOTE>

tomp,
Thanks for the update I have been waiting for them, I do not care for the Catch All version at all. Let me know when you hear anything about this problem. I appreciate your help!!!

np...


BTW, here is the best forum for your TC HD: http://groups.msn.com/harleytechtalk/tc88fathead.msnw

and pan: http://groups.msn.com/harleytechtalk/panhead.msnw

I have an EFI 04 Fat Boy 103" with 118/117 hp/tq

Here is their reply:

"The parts fit good and we have since ran the mold (and have inventory). Your
parts should be on their way. I will be out of the office today and
tommorrow but will check back with you on Friday."

Thanks,

Winfield Consumer Products/Husky Liners

tomp,
Will you let me know when you recieve the mats and have a chance to see if this solves the fit problem? I would appreciate it. Will they sell direct, so that I can make sure to get the right part number?

As soon as I can verify the fitment for myself, I will ask him. Do you already own a set, so we can have him send you the new one as a replacement?

Tomp,
Yes I do own a set that was purchased in October, I bought them online and I tried to contact the vender on several occasions regarding the bad fit and my inquires were NEVER addressed. I doubt I have any leg to stand on at this point, other than a mat that clearly does not fit!!!

Thanks
Scott

Call them directly and tell them what is wrong. They didn't even ask for my receipt or the old mat back.

Tomp
Thank you for all the GREAT advice and the follow up to this post that you have done over the past couple of months!!!

Scott

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by tomp:
Oh no, I just noticed that they made the indention on the wrong floormat! The indentation was suppose to be on the left side of the driver's floormat for the kick panel and they put it on the passenger side!

Oh well, back to the drawing board </div></BLOCKQUOTE>

No, those fit fine. I've had 2 sets.

Maybe he needs to align them better.

Tomp,
Do you know what Steve's last name is @ Husky. I called them today and the woman who claimed to be in Customer Service was not willing to help at all, she just said that they would be willing to sell me a new set instead of just the one that I need!!!

Thanks
Scott

Steve Bower
Winfield Consumer Products/Husky Liners

I wouldn't offer to buy anything, as they owe you a liner that fits your H2 correctly.

DeBest, I received the new floor liners today. The 2006 H2 part number is 31311.

They fit great. Looks like they redesigned both driver and passenger side.

Tomp, I recieved mine last week and they fit GREAT!!! Thank you for your help.........

Well, it sounds as if you got them before I got mine