40a ignition fuse blowing
 

My 40a ignition fuse keeps blowing at start up.
It will not blow if I just turn the key forward I can hear the fuel pump kick on and all acc turn on. As soon as I go to crank it it will pop.

It popped about a couple months ago replaced and it was fine until this week , went for a ride and pop , tried another fuse and done


. Any suggestions would be nice to head me in the right direction.

Re: 40a ignition fuse blowing
 

Not sure but maybe check the connections at the starter. Maybe one is loose and shorting out or the solenoid of the starter may be going bad and shorting inside.

Re: 40a ignition fuse blowing
 

If you have an aftermarket remote start installed look for wires rubbed through on tin knee bolster below steering column