Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   H2 Classifieds (http://www.elcovaforums.com/forums/forumdisplay.php?f=8)
-   -   37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW! (http://www.elcovaforums.com/forums/showthread.php?t=39431)

Bimmer9938 05-01-2010 02:35 AM

37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
The 20X10" black XD Diesels with the Nitto 37x13.5R20 Mud grapplers. I never drive the truck as it's just my toy. The tire tread blocks that touch the road, even still have nipples showing (especially the rears). Literally 200mi if that on them. I have the Truxxx 2.5-3 F w/ 1.5 spacer rear lift, they just scuff the inside wells at full cock, and If I trimmed the black plastic liner at the bottom wouldn't at. They have never been taken off road or patched or plugged.

Here are some pics, I can take some pics of the tires showing the like new condition. I would honestly rate them at 99.9% tread.

http://s644.photobucket.com/albums/u...LACK/?start=20





I just checked e-bay and the tires list for $1873.35+140 S/H and the rims list for 859.99+ 75 S/H, plus you would have to buy lugs $50-110. and mounting and balancing $70-$110. Depending on where you go or who you know.

My e-mail is: Bimmer9938@aol.com

PRICE IS NOW $1800. (Located in Durham NC) or $1300 TIRES AND $500. FOR THE RIMS.

Pictures of tread. I'll try not to drive the truck much till they sell.

http://s644.photobucket.com/albums/u...S/H2%20WHEELS/


That card started the 0 measurement 2/32 from the bottom. (It's not an accurate reader obviously)

.

Bimmer9938 05-01-2010 11:29 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
LOWERED PRICE TO $1800.

Or buy rims for $500. and tires for $1300.

porschett 05-02-2010 12:32 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Got a question for you. Do you think it's possible to powder coat the black sections of the wheels?

Bimmer9938 05-02-2010 12:45 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Quote:

Got a question for you. Do you think it's possible to powder coat the black sections of the wheels?


Yea, why wouldn't it?

Bimmer9938 05-02-2010 01:02 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
I know these guys do wheel powder coating.

http://www.rimpro.com/index.html

porschett 05-02-2010 01:27 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
PM sent

Bimmer9938 05-03-2010 01:54 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Hey sorry my cell died, at least I warned you. :beerchug:

ROUSHDEMON 05-04-2010 06:06 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
dudes!
two things, I have those same wheels and the middle cap is platic, not metal, in order to powder coat anything you need to be able to maintain an electric field in between the metal item and the powder coating gun so the dust can stick to the metal before cooking, ORRR if it is plastic it would have to be spraid with a special base paint that contains metal particules which will allow the dust to stick to the item BUT...... you have got to make sure that the platic is tough enough to be able stand 400 degrees for 15min without deformation... if not then you're SOL..... I just spraid painted mine black:D
and two.... Bimmer, why are you getting rid of them?

Bimmer9938 05-04-2010 06:12 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Quote:

Do you think it's possible to powder coat the black sections of the wheels?


The center caps aren't black, I'm not an idiot...I know you can't powder coat plastic, and you need an etching primer on chrome plate to paint...thanks.

Bimmer9938 05-04-2010 05:21 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
A few people sent me messages wanting pics of the rims and showing how much they stick out...so here you go.


.

.

.

.

.

.

.

.

.

Bimmer9938 05-04-2010 05:22 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 

.

.

.

ROUSHDEMON 05-04-2010 11:59 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Quote:

Originally Posted by Bimmer9938
The center caps aren't black, I'm not an idiot...I know you can't powder coat plastic, and you need an etching primer on chrome plate to paint...thanks.


WOW, I totally read it wrong my bad, sorry dude I thought he meant to powder coat the center caps black. I've been too damn tired.... anywho
btw, I never called you an idiot, just trying to help:beerchug:

Bimmer9938 05-05-2010 12:20 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
No it's cool, I was tired too and have gotten like 100 e-mails on these from Craigslist and sick of stupid questions... (People say call me..then want trade a living room set for them).

Va Beach H2 05-08-2010 04:05 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
man what happened? you were suppose to call me about the tires and never heard back from you. this is ryan the guy in va beach

Bimmer9938 05-08-2010 04:20 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
I called you a two days ago and left a message... I still have them, but I've gotten so much interest I'm going to hold off for someone to buy both the tires and wheels together for my asking price. I found out it was going to cost me $100 just to have the tires taken off.

Sorry for any inconvenience.

Va Beach H2 05-08-2010 04:23 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
do 1500 for rims and tires and ill come get them right now

Va Beach H2 05-08-2010 04:25 PM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Ya I was out tuna fishing 2 days ago thats why i didnt get your call - would you be willin to meet me say an hour away towards vb - i drive 2 hours u drive 1

Bimmer9938 05-10-2010 12:13 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Someone came last night to buy them, but then wanted to pay by check, so yea...I still have them, and they are still for sale.

Bimmer9938 05-11-2010 12:13 AM

Re: 37" NITTO TIRES AND 20" KMC DIESELS, LIKE NEW!
 
Wheels and tires are SOLD.


All times are GMT +1. The time now is 10:19 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.