Re: Tie Rod
 

Well if it had a groove around the edge inside to capture some grease it would. The ones I looked at today if you did that it would just ooze out where the zerk was. Nothing to contain it. Have you had success doing that in an offroad environment??

Re: Tie Rod
 

Something might be fabbed up using these. Interesting little clip.

http://www.currieenterprises.com/ces...nnyjoints.aspx

Everybody throw out ideas or places you know somebody that actually makes things. Im working on my network of talented friends.

Re: Tie Rod
 

Are the later model OEM tie rods larger diameter and stronger?
Have more people broken the earlier tie rods?
Maybe we can upgrade to the later tie rods?

Could a simple clamp-on reinforcment sleeve be fabricated?
That way you wouldn't need to un-bolt anything or re-align the front end



What does the Alpha sterring system look like? Would that system work on the older H3s

Re: Tie Rod
 

That's usually it.

Re: Tie Rod
 

I doubt they've beefed up the steering at all for the Alpha. We're stuck waiting for someone to come up with something aftermarket.

Re: Tie Rod
 

Yo HummBebe - GOT IT!! Installed it lastnight and now it's back to the trails!! I owe you a ROD!!:giggling: I checked with the dealership and I should find out today when the damn thing will be in, once I get it I will FEDEX it back to you.

Thanks again!! As for coolnest - you get :perfect10s:

Re: Tie Rod
 

YAY!!!!

:jump:

Re: Tie Rod
 

Still not in yet, just sent you an email. Spoke with the dealership on Wednesday and not in yet. Will try calling again today.

Thanks again!! :dancingbanana:

Re: Tie Rod
 

Basically, the same. No specs yet, but since tire rods usually break due to stress from hits directly on them, or hits into the side of a wheel, or pressure from running on the side of the wheel, I would guess they will be the same size. I can say, the steering system looks identical, but I didn't measure anything.

Re: Tie Rod
 

yep she da bomb :beerchug:

Re: Tie Rod
 

Heck yeah definitely cool. A for my tierod STILL NOT FREAKIN' IN YET!! If it takes too long I may have another source I could use - Hummbebe will keep you posted. If you ever need to directly email me just use:

4x4boyz@gmail.com

Aloha!

Re: Tie Rod
 

Thanks for the update :-)

Re: Tie Rod
 

The older 14mm inner/outer rods are being replaced with 16mm rods. If one (inner or outer) is replaced, the other must also be replaced.

Re: Tie Rod
 

Thanks for the info f5fstop!

Re: Tie Rod
 

So do you think my new rack came with 14mm or 16mm?

Re: Tie Rod
 

Chances are the new ones, but only way to tell would be to measure the diameter of the links, or see if there is an eight digit part number...outer - 15907712.

Now, I don't mind that the newer rods are larger, I also don't mind that if you replace one (either inner or outer) you have to replace the other. However, I am having a hard time locating the new rods for my trip.
To say I'm a bit peed at some people right now, is an understatement.
I should know more on Tuesday, when I return to work and have a long conversation with a parts' engineer.

Re: Tie Rod
 

The reason I noticed my tie rods were different, is when I went to pick up my truck after the rack was replaced, my new tie rods were black, with a yellow stripe.

Re: Tie Rod
 

Tell him I said hi :jump:


And make sure he knows I sent my only spare to Hawaii for a fellow wheeler....we're getting desperate here.

Re: Tie Rod
 

:iagree:

WE NEED SPARES!!!!

Re: Tie Rod
 

I have not looked to see if the new rods are black, been a little busy putting out other fires.
How I found out about the new rods being back serviced is I ran across the chassis service engineer manager yesterday and asked him to explain why there were over three hundred back-ordered inner tie rods and about 150 back-ordered outer tie rods for the H3. His response was GM is not having any 14mm outer made, and only a limited number of inners, and the dealers should be ordering the new 16mm rods. Well, the parts manual does not state this, or at least my electronic copy dated May 1, does not state that. He will be looking into it.
I then had a friend run a parts check and guess what, per the parts' system, there are no new ones in stock either (WTF). So, it appears everyone, including me have taken today as a vacation day, and Monday is a holiday, therefore on Tuesday, I will be on the phone first thing to the chasis dude and the dude in charge of these tie rods for service parts.
Now, I have to get back to my production of some front end brackets for a Hi-Lift jack.