Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H3 (http://www.elcovaforums.com/forums/forumdisplay.php?f=26)
-   -   New Bilstein / Cognito Hummer H3 Leveling Front Shocks??? (http://www.elcovaforums.com/forums/showthread.php?t=26955)

HummBebe 05-18-2007 09:03 PM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Quote:

Originally Posted by tomp
Ok, I will try. However, I understand them to be high pressure charged and may be kind of difficult depending on the PSI they used:beerchug:


You will see a line at the bottom :) Measure from there.

Sewie 05-19-2007 06:23 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
I just ordered a set tonight. We'll see how they do.

tomp 05-22-2007 04:38 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Ok, shocks arrived today. Wasn't sure where to take measurements from, so I took them from the tip of the threaded end and to the center of the bolt hole on the other end.

Didn't have time to install, but will get to that hopefully tomorrow...

The shocks measure 15.5" compressed and 21.75" uncompressed using the method above. Please let me know how this compares to stock and Rancho shocks. thanks!

HummBebe 05-22-2007 06:02 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Here is the Rancho Specs....
Quote:

2006 Hummer H3
Front shock IFS
Compressed length 13.43 Extended length 15.77
2.34 Travel


Rear Shock S
Compressed Length 15.25 Extended length 23.49
8.25 Travel



Now for the Avalanche 4" lift for front replacement:

Quote:

Front shock IFS
Compressed length 13.875" Extended length 20.75"
6.875 Travel

Rear Shock Suburban 4" lift shock
Compressed Length 15.875" Extended length 26.25"
10.375" Travel


Quote:

Link to Part #'s
http://www.gorancho.com/flash/docs/2005_shocks.pdf

Link to Shock Specs
http://www.gorancho.com/flash/docs/2005_shocks.pdf

Part numbers: Rancho 5000 Front RS5268
Rancho 9000 Front RS99268

Part Numbers: Rancho 5000 Rear RS5190
Rancho 9000 Rear RS99190

If you look at the year make and model, both shocks have multiple applications. If they ask you what rear and model, defer to the part number.

PLEASE keep in mind Rancho will not warranty these shocks.....they are not being used in their "proper" application.

They will not warranty the H3 shocks either if your Torsion bars are turned, so... meh....

HummBebe 05-22-2007 06:17 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Looks similar. Glad they did it right!

MtnHmr 05-22-2007 05:36 PM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Quote:

Originally Posted by tomp
Ok, shocks arrived today. Wasn't sure where to take measurements from, so I took them from the tip of the threaded end and to the center of the bolt hole on the other end.

Didn't have time to install, but will get to that hopefully tomorrow...

The shocks measure 15.5" compressed and 21.75" uncompressed using the method above. Please let me know how this compares to stock and Rancho shocks. thanks!

Just a humble thought from the new guy.

When you compare shocks from different manufacturers you may want to measure from the top of the shock body instead of including the threaded stud in your measurement. The same shock, for the same car, form two different manufacturers may have a very different length threaded stud on the end. So in essence, when you measure, you are gettting the compressed/extended(travel) measurement plus whatever the difference is between the two studs.
I found this to be true when comparing the stock shocks to the Bilstiens. The threaded stud on the stock shock was longer.
I hope this helps

HummBebe 05-22-2007 05:43 PM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
All of those measurements are on the shock specs link above.

And true, he should be measuring the body of the shock.

Wisha Haddan H3 05-23-2007 01:22 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Quote:

Originally Posted by HummBebe
Here is the Rancho Specs....


Now for the Avalanche 4" lift for front replacement:


Hey Beebs, those links open the same pdf. Where are the specs?

blindzebra 05-23-2007 02:35 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
I think I'll go with the Foxs when I replace mine.

RuggedH2 05-23-2007 03:55 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
There is a lot to like about the Fox shocks (except the price).

I was thinking about Fox for the rear axle.

tomp 05-23-2007 04:08 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Okay, shocks are on and test drive completed. I drove it around for a while and what a huge difference! Big improvement over stock ride quality, even with TBs cranked!:jump:

HummBebe 05-23-2007 06:05 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
OOpsie:o


http://www.gorancho.com/flash/docs/2...shock_spec.pdf

HummBebe 05-23-2007 06:09 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
I think, no wait I know that the Fox shock is FAR superior to any of these mentioned in this thread.

Yes they are pricey, but for the amount of money I have spent on shocks I could have bought a set of the Fox shocks.

The fox shocks are rebuildable. If you blow it, you can rebuild it for less than a replacement cost of the other shocks.

Idaho-Hummer 05-24-2007 05:27 PM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
ok, I give up, where are you finding the Fox shocks at for our H3's?

H3slate 05-24-2007 10:37 PM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Fox shocks are available from Rod Hall Products. They are not listed on the website, but give them a call. When they are not racing they are very friendly and knowledgable.

http://www.rodhall.com/

1-877-ROD-HALL

HummBebe, have you purchased the fox shocks? I know they were recommended by a suspension guy working on HD torsion bars for the H3, just curious if you have had a chance to try the shocks.

HummBebe 05-24-2007 11:08 PM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
No not yet, but soon. You can also get them from Sam at Samco Fab...

http://www.samcofabrication.com/index.html

He's even nicer :jump:

Wisha Haddan H3 05-25-2007 01:36 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Quote:

Originally Posted by HummBebe
No not yet, but soon. You can also get them from Sam at Samco Fab...

http://www.samcofabrication.com/index.html

He's even nicer :jump:


Damn bebes, is there anyone you DON'T know! Oh, and thanx for the link :D

HummBebe 05-25-2007 02:05 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Quote:

Originally Posted by Wisha Haddan H3
Damn bebes, is there anyone you DON'T know! Oh, and thanx for the link :D



:dancingbanana:

SR1355 05-25-2007 02:53 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Bebes, did you ever get anywhere with Sam and HD Torsion Bars???? Where did you pick up your add-a-leaf kit???

HummBebe 05-25-2007 03:52 AM

Re: New Bilstein / Cognito Hummer H3 Leveling Front Shocks???
 
Quote:

Originally Posted by SR1355
Bebes, did you ever get anywhere with Sam and HD Torsion Bars???? Where did you pick up your add-a-leaf kit???


I actually am ready to oder the HD t-bars now. And when I get everything together, we will place the order.

The spring helpers I ordered are going on tomorrow. Can you believe I still don't have those on???

It's from Hellwig, and they are load pro 15's. http://www.hellwigproducts.com/produ...es/default.asp They are progressive rate springs, so the more weight you add the firmer they get. No weight and you still have a comfortable ride.


All times are GMT +1. The time now is 10:34 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.