Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   General H3 Discussion (http://www.elcovaforums.com/forums/forumdisplay.php?f=23)
-   -   $59.00 for a spare h3 key? (http://www.elcovaforums.com/forums/showthread.php?t=19295)

wpage 08-09-2006 11:30 PM

$59.00 for a spare h3 key?
 
Just had my jack changed out at the dealer for the recall. While there got a spare key made for a wallet holder without fob. After the guy cut it thought he made a error when he said it was $59.00. He checked it. Since its a special resistor type key and is uncommon I am stuck. Gold Coast Cadillac Oakhurst NJ you suck!

fourfourto 08-10-2006 12:00 AM

Re: $59.00 for a spare h3 key?
 
:eek: BAM :eek:

That sucks
Better off getting something like this for a spare :D :cool:

http://cgi.ebay.com/ebaymotors/HUMMER-SWITCHBLADE-KEY-BLANK-FOR-H3-MODELS_W0QQcmdZViewItemQQcategoryZ40016QQihZ010QQi temZ200015310645QQrdZ1QQsspagenameZWDVW

dеiтайожни 08-10-2006 12:01 AM

Re: $59.00 for a spare h3 key?
 
Maybe you should've asked how much it was before having it cut? :confused: It's common knowledge that keys at the dealership run $50-$200.

f5fstop 08-10-2006 12:03 AM

Re: $59.00 for a spare h3 key?
 
No resistor in a H3 key, the resistor circuit is in the ignition module's passlock sensor. The system senses a correctly cut and grooved ignition key has been inserted, and when the switch is turned the passlock controller sends the a signal to the BCM. The BCM sees the correct signal and triggers the PCM to allow the fuel to flow, ignition to spark, and engine to start.

Older passlock systems did use a resistor, it was quite noticeable. Looked like a little black square wart on both sides of the key.:D

Dealer did just what dealers do, charge customers full price for the part. :(

NoMoGMPG 08-10-2006 12:34 AM

Re: $59.00 for a spare h3 key?
 
Quit bitchin', the PK3 key is the least expensive of the new anti-theft systems employed by OEM's. I know that a Volvo key I just had sent to me (took a week cuz it had to be matched to the VIN) cost $140 and that was wholesale!

The cheap Home Depot spare key days are over.

Wisha Haddan H3 08-10-2006 03:54 AM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by NoMoGMPG
Quit bitchin', the PK3 key is the least expensive of the new anti-theft systems employed by OEM's. I know that a Volvo key I just had sent to me (took a week cuz it had to be matched to the VIN) cost $140 and that was wholesale!

The cheap Home Depot spare key days are over.


No kidding. The key to my ex's land cruiser was $300 bucks from the Parts dept, and $50 more to program the darn thing :(

NEOCON1 08-10-2006 04:01 AM

Re: $59.00 for a spare h3 key?
 
who the hell needs a key :p ;) :D

Agriv8r 08-11-2006 12:38 AM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by NEOCON1
who the hell needs a key :p ;) :D


someone who loses the originals??

Viet Nam Vette 08-11-2006 12:50 AM

Re: $59.00 for a spare h3 key?
 
Now you can see why there are so many Car jackings....!!! The rides are becoming harder and harder to steal. The best Anti Theft device is a BFH..Or a tire Iron or a Club ..not the one that goes on the steering wheel..!!

And..if you have a carry permit.. your all set...BAM..!!:D

HummerHippy 08-14-2006 04:25 PM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by Wisha Haddan H3
No kidding. The key to my ex's land cruiser was $300 bucks from the Parts dept, and $50 more to program the darn thing :(


Damn, I thought $80 for another key to my Infiniti was a lot!

usetosellhummer 08-14-2006 05:21 PM

Re: $59.00 for a spare h3 key?
 
A GMC blank works, $5.00 at most joints. you got rrrrriiiiippppppped.

partsguy 08-14-2006 05:26 PM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by usetosellhummer
A GMC blank works, $5.00 at most joints. you got rrrrriiiiippppppped.

The H3 blank is $59.00 but you are right a chevy,GMC, blank are cheaper by a long shot.I don't sell the H3 blank.Just ask for a B110 curtis blank.

aggiehummer...er 08-14-2006 07:21 PM

Re: $59.00 for a spare h3 key?
 
If you lose both of your original Saab keys, you have to get a new computer installed in your car at a cost of about $900.

usetosellhummer 08-14-2006 07:28 PM

Re: $59.00 for a spare h3 key?
 
pontiac GTO key is ceramic, drop it the right way and your done, the key has to be orderd from Holden in Auzzyland

RubHer Yellow Ducky 08-15-2006 10:00 PM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by partsguy
The H3 blank is $59.00 but you are right a chevy,GMC, blank are cheaper by a long shot.I don't sell the H3 blank.Just ask for a B110 curtis blank.


Could you please be more specific..

are you saying a B110 curtis blank will start an H-3 without being cut???

or

cut a B110 curtis blank from an original H-3 key and that will work

RYD

Aubs 08-16-2006 05:51 PM

Re: $59.00 for a spare h3 key?
 
I've moved like 5x and haven't lost my 2 H2 keys yet. You just need to be more responsible! haha. BMW and MB keys cost a forture too, so $60 bucks really isn't bad at all.

KB7TCV 08-16-2006 06:06 PM

Re: $59.00 for a spare h3 key?
 
From reading the thread and having some experience in cutting keys. He is saying that the blank is a curtis B110. You still need to get the key cut to your original.

ree 08-16-2006 06:08 PM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by Aubs
I've moved like 5x and haven't lost my 2 H2 keys yet. You just need to be more responsible! haha. BMW and MB keys cost a forture too, so $60 bucks really isn't bad at all.

BTW, an H2 compatible blank is like $2-3.

Aubs 08-16-2006 06:53 PM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by ree
BTW, an H2 compatible blank is like $2-3.


Eh, I enjoy being fleeced! :D

partsguy 08-16-2006 06:58 PM

Re: $59.00 for a spare h3 key?
 
Quote:

Originally Posted by RubHer Yellow Ducky
Could you please be more specific..

are you saying a B110 curtis blank will start an H-3 without being cut???

or

cut a B110 curtis blank from an original H-3 key and that will work

RYD

Jesus.....no key that I know will start anything without being cut.Ok...buy a b110 blank cut it either by your code or copy it from the original.Sorry about being so VAGUE:confused:


All times are GMT +1. The time now is 02:17 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.