Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H3 (http://www.elcovaforums.com/forums/forumdisplay.php?f=26)
-   -   Radar Detector directwire install (http://www.elcovaforums.com/forums/showthread.php?t=30125)

subunix 10-02-2007 03:05 PM

Radar Detector directwire install
 
Has anyone installed a directwire in the H3 yet? I've got one for an Escort 8500 and was just wondering where people hooked up the wires

subunix 10-03-2007 12:06 AM

Re: Radar Detector directwire install
 
Went and got a fuse tap , ill let everyone know how it goes tomorrow

aflax24 10-04-2007 08:30 PM

Re: Radar Detector directwire install
 
I have done it, I just pulled the stereo/climate panel and wired it (with a fuse) to the rear wiper switch. I drilled a hole in the small odd shaped dashboard plug located top/center. I also fished wires for the auto mute button to mount it on top of the steering column. Works great.

Took a little time and carved out a block that contours around my detector and stuck it down to the dash. I will post pics.

subunix 10-05-2007 12:18 AM

Re: Radar Detector directwire install
 
Quote:

Originally Posted by aflax24
I have done it, I just pulled the stereo/climate panel and wired it (with a fuse) to the rear wiper switch. I drilled a hole in the small odd shaped dashboard plug located top/center. I also fished wires for the auto mute button to mount it on top of the steering column. Works great.

Took a little time and carved out a block that contours around my detector and stuck it down to the dash. I will post pics.



cool, i just did the wire i didnt do the smartcord, I may get it later on. I ended up piggying off the rear wiper fuse as well, works great

Hucky 10-05-2007 12:42 AM

Re: Radar Detector directwire install
 
What is a directwire?

Thanks

subunix 10-05-2007 01:15 AM

Re: Radar Detector directwire install
 
Quote:

Originally Posted by Hucky
What is a directwire?

Thanks



A wire you hook directly to your fuse block to power an accessory ie. radar detector, that way you dont have any wires showing and keeps your stuff out of view. Thats the best i can describe it

Hucky 10-05-2007 03:04 AM

Re: Radar Detector directwire install
 
Got it. Thanks

We always referenced that as a Hardwire or a Direct Connect, Fusable Im with ya now.

Thanks

DMV631 05-02-2008 01:18 PM

Re: Radar Detector directwire install
 
how do you remove the control panel to access the rear wiper wires??

foozed 07-30-2008 12:42 AM

Re: Radar Detector directwire install
 
pics ?

GM_Tech 08-02-2008 02:48 PM

Re: Radar Detector directwire install
 
This info should help You guys.
NOTHING needs to be removed
put Your head underneath the dash by the foot break side to the firewall area. You'll see thick harness. then You'll see smal harness taped to it with blue connector on it. there will be 2 wires in it. Pink and Green. Pink wire is the one You want to use


foozed 08-24-2008 03:55 AM

Re: Radar Detector directwire install
 
On a 2008 this harness isnt there - or it is but it has 3 wires..

I didnt have much luck finding a switched 12v on it - but I could have spent more time checking it..

I decided to get a fuse tap with extra power lead from autozone and go that route.


All times are GMT +1. The time now is 01:48 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.