When I get my truck back from replacing the damn ring and pinion. I've got an appt. to install my new Eclipse radio. Like my Yukon, I will have 3 cameras. One to see the hitch, one to just see out the back and I have a 3rd camera on the back of my enclosed trailer.

I would like an attractive, factory looking rocker style 3 way switch. In my Yukon, I used a tiny but simply 3 way toggle.

Anyone have any suggestions?

Thanks,

Mark

When I get my truck back from replacing the damn ring and pinion. I've got an appt. to install my new Eclipse radio. Like my Yukon, I will have 3 cameras. One to see the hitch, one to just see out the back and I have a 3rd camera on the back of my enclosed trailer.

I would like an attractive, factory looking rocker style 3 way switch. In my Yukon, I used a tiny but simply 3 way toggle.

Anyone have any suggestions?

Thanks,

Mark

If you have a decent alarm, you can wire them up on the alarm's accessory outputs so you can use the remote for the alarm. Just an option to consider. Your radio tech could handle this.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by tomp:
If you have a decent alarm, you can wire them up on the alarm's accessory outputs so you can use the remote for the alarm. Just an option to consider. Your radio tech could handle this. </div></BLOCKQUOTE>

Good idea but when the radio goes in, a remote start will also go in. The problem is, the remote will have modules to open/close windows, etc.

Besides, I prefer to have a switch on the dash. Much simpler.

Thanks,

Mark

I wish I had a good online source for 12 volt switches to refer you to

Hey, get back to work on my Air Suspension

Don't know if they have a website, but they have every kind of switch possible. I sent some to Finally and he said they were perfect.
NORVAC

Thanks Drty,

I'll call them. Just want to find something that looks like it belongs.

Mark

You can search till your hearts content from here:

http://www.globalspec.com/industrial..._Manufacturer/

Thanks guys, WOW, what a selection... I'm still checking it out.

Mark