Anyone have a set or know of any cheap???

Anyone have a set or know of any cheap???

Sut Guards are a pain in the back side to keep attached to the body.
Would not even bother to put them on.

When I had my SUT, the taillamp guards would not stay attached. It was a real pain.

partsguy -- Do you know if there is a new design with holes/screws? I know the guards on the Pacific Blue limited editions have screws, but I thought I saw some the other day on a regular truck that had screws as well.

new design has screws

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Mr. I - Man:
new design has screws </div></BLOCKQUOTE>

Are they self-tapping or is drilling required?

Drill........

no more 3M DST. Oh well - drill the buggers!

don't know maybe boogers.???

I believe they were drilled . The stealership did them.

yep!

The damn Sut's are shaped strange and put pressure on the DST side of the guard.
They pop off all the time.
Drill and screw
What a thing to say here,...........

The guards I have use existing screws and require no drilling.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by TXSUT:
The guards I have use existing screws and require no drilling. </div></BLOCKQUOTE>

Are you talking about the existing screws on the interior of the tailgate? All of them have these. We're talking about the outside attachment that previously used double-sided tape.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by mstams:
Are you talking about the existing screws on the interior of the tailgate? </div></BLOCKQUOTE>

Yes, my misunderstanding.

TXSUT,

Are your's factory? I assume they are...

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by VTSTOMPER:
TXSUT,

Are your's factory? I assume they are... </div></BLOCKQUOTE>

No, they came from H2 Source (if I recall correctly).

ok, I was checking them out in your "GOBI pics" and liked the look of them. I remember them having more cross bars than the factory ones.

Yeah, they have one more cross bar than the factory guards, which are more in line with the separations of the bulb chambers than these are.

I had the same problem with mine. They were going off about every two weeks. I cleaned the area with alcohol and sanded the portion where the double sided tape attached to the guard and then cleaned it with alcohol. I used the heavy duty 3M double sided tape and they have held for the last month and do not show any signs of coming lose.

Are you guys talking about the whole guard coming off, or just the doube-sided tape?