From looking at the pictures of the H3's on this site; it looks like most people have the little GM logo in front of the H3 on the lower part of their door.

My little GM logos are up higher right behind the top of the fenders and not on the door.

More of a trivia question, but anybody else have theirs up high too?

From looking at the pictures of the H3's on this site; it looks like most people have the little GM logo in front of the H3 on the lower part of their door.

My little GM logos are up higher right behind the top of the fenders and not on the door.

More of a trivia question, but anybody else have theirs up high too?

I only seen one with the gm under antenna on fender(maybee it was your rig).
I know some people use a heatgun and remove it all together.Mines on the doors .

I pulled mine off, didn't like them

Mine are in the garage, in the junk bin.

Will try to remember to provide them with the truck when I sell it.

I don't know why they would change the location of those. Interesting. You can also use fishing line, get it behind the badge and drag it through the adhesive. Works well for these kind of things. Make sure you rub the remaning adhesive off with a light buffing compound. Using paint thinner or mineral spirits damages the clear coat and it will show up as small cracks in a few years.

The plant uses a tool to locate the emblems so I don't think it came that way from here.

Mine and Kira's are on the toolbox. Took them off the days the trucks came home.

they must of been party'n at the factory that day

they are in a goofy spot. guess I will need to take them off too. I was kinda surprised to not see something on that bigazz grill. seems like a great spot for some brand badging.

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">I pulled mine off, didn't like them </div></BLOCKQUOTE>


Funny, my water heater is now made by "GM".

My H3 has them on them on the same place as westhillsat's

Mine is on the lower inside of the toilet lid...

Reminds me of the Porsche forum. They went crazy discussing removing the Boxster logos off of the trunk lid...



S.

All the H3s at the dealer last night that had been built recently had them under the antenna. Didn't check the drivers side to see where they were on that side.

One of the first mods I did to my H3, was to take those cheep looking GM badges off. It looks much cleaner w/o them! I also took the dealer emblem off and filed it in the garbadge can, under the "SEE YA" file!

My question is: Why?

They looked odd by the H3 logo, and now they look even worse under the antenna