Here is a link for some replcement Projector housings that might work for our trucks Projector lights

Here is a link for some replcement Projector housings that might work for our trucks Projector lights

Hmmm. So can you put Silverstars in those? Wonder if they make any improvement.

- Dan

-------------------------------------------------
SUT on order 12/02. 12 months down, 6 to go!
-------------------------------------------------

Saw these too:

http://www.procarparts.com/store-detail.asp?sku=UNI%2DOTT%2D7XIN%2DEUCL%2DRO2B%2DPC VX

-------------------------------------------------
SUT on order 12/02. 12 months down, 6 to go!
-------------------------------------------------

I'm not exactly a math teacher or anything and given the fact that it is like -400 outside I gave myself 2 seconds to measure the lights on the truck and came up with 6 1/2". Chances are I am wrong, I tend to always be. If it is 7" then I will be the guinea pig on this one and try them out. Someone let me know.

I know for a fact they are 7" round. Thinking of buying them!!

Stock headlamps are 7"

Maybe im missing something, but whats the point

Nicer beam pattern?

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by N2ITNSD:
Maybe im missing something, but whats the point <HR></BLOCKQUOTE>

The point would be to make your own headlight that looked like this except for a lot cheaper. No bi xenon but at least it would be an upgrade over stock and better than just a normal HID upgrade.

However.. Here is what I see could cause a problem. If you look at the headlight below from the H2, you will notice that there are 3 "mounting extensions" coming off the face of the lense. These are "guides" for mounting on the black housing that keeps the headlights from moving once installed in the grill. The lights from these other companies do not have these so there could be an issue with the lights being loose and moving around.

But, until someone tries it out, who knows. The lights are not that expensive so it would not be that much of a loss for someone if they tried...

03 Black with Nology Ignition products, K.I.T. carbon-fiber fender trim / hood scoop with handles / hood side tower caps / rear louvers / engine cover, 14 inch BulletProof Suspension powdercoated black installed by CTL MOTORSPORTS, Fox Racing Shox, 44inch Truxus STS with 17x14 Weld Racing Wheels, Snyper brakes, Custom black bi-xenon projector headlights, Kodiak fold down steps, black grill, Pro-Fit custom black LVE fuel door, Benevento carbon-fiber dash kit, Husky Liners floor mats, MOMO shift knob / pedals, HITCHCAM rear camera, Royal Purple fluids, Cleargearz clear differential cover, Airaid intake / filter, Borla exhaust / headers, Optima Battery.

So basicly its a fake looking H.I.D. light that performs like a stock one.........Bling??

You only need to put a red "R" on it and you could sell it to the ricers as well

Well... it's basically a replacement "projector" light which can use either halogen or HID light bulbs. It is really meant for older model vehicles that had those "milky" looking headlights.

And as far as your "RICERS" comment - those are companies that are geared towards "RICERS". I am surprised APC doesn't have these as well. In fact, APC has an intake for the H2 and were planning on developing other parts as well (insider info)..... SCARY!!!!!!!

03 Black with Nology Ignition products, K.I.T. carbon-fiber fender trim / hood scoop with handles / hood side tower caps / rear louvers / engine cover, 14 inch BulletProof Suspension powdercoated black installed by CTL MOTORSPORTS, Fox Racing Shox, 44inch Truxus STS with 17x14 Weld Racing Wheels, Snyper brakes, Custom black bi-xenon projector headlights, Kodiak fold down steps, black grill, Pro-Fit custom black LVE fuel door, Benevento carbon-fiber dash kit, Husky Liners floor mats, MOMO shift knob / pedals, HITCHCAM rear camera, Royal Purple fluids, Cleargearz clear differential cover, Airaid intake / filter, Borla exhaust / headers, Optima Battery.