Hummer Forums by Elcova - Piaa 520 driving light install question

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)

- Technical Discussion and Customizing your H3 (http://www.elcovaforums.com/forums/forumdisplay.php?f=26)

- - Piaa 520 driving light install question (http://www.elcovaforums.com/forums/showthread.php?t=16336)

nashvegasH3

12-13-2005 09:49 PM

where is the best place to find a 12 volt switched wire?

nashvegasH3

12-13-2005 09:49 PM

where is the best place to find a 12 volt switched wire?

f5fstop

12-14-2005 09:03 AM

More information would be nice

, but I'll make some assumptions.
If you are installing a switch in the center trim panel, under the HVAC, there is a brown wire going into the gray 12-pin connector on terminal K. This connector plugs into the HVAC control head.
It is switched hot by the BCM through the HVAC relay.
I'm also assuming you just need this for an ignition On trigger wire, and the actual power for the lights will be coming from the battery, through a relay.

nashvegasH3

12-14-2005 11:59 AM

sorry for the lack of info. but you are exactly right. Thanks for your help

All times are GMT +1. The time now is 07:58 AM.