what do I need to mount my front license plate on my H3?
 

Just got my plates today. There are 2 square holes up front but no bracket or any threaded inserts for bolts or anything.

Is there some sort of bracket for it?

Re: what do I need to mount my front license plate on my H3?
 

check in your glovebox and see if there are two small plastic plugs -- those pop in those holes, then you can use screws (which may be in there too) to attach the plate..if not -- your dealer probably has a ton of these and would just give a couple to you.

Re: what do I need to mount my front license plate on my H3?
 

ah I will check that out. Probably the same as the ones for the back plate.

thanks

Re: what do I need to mount my front license plate on my H3?
 

You can also get them from any auto parts store!

Re: what do I need to mount my front license plate on my H3?
 

no luck in the glovebox.

looks like a stop at AutoZone

Re: what do I need to mount my front license plate on my H3?
 

Advance Auto sells these plugs. I remove my dealer vanity plate and plugged the holes with the plugs. They are very large in size. The shaft is about 3/8" OD , 1.5" long, and the cap is about the size of a half dollar. They look like black, streamlined mushrooms.

Re: what do I need to mount my front license plate on my H3?
 

OR.........

SUPER GLUE !!!!!

RYD

Re: what do I need to mount my front license plate on my H3?
 

[quote=RubHer Yellow Ducky]OR.........

SUPER GLUE !!!!!

RYD[/quote

I prefer "Duck Tape" or is it "Duct Tape?":jump:

Re: what do I need to mount my front license plate on my H3?
 

[quote=timgco]
DUCKY TAPE

:perfect10s:

Re: what do I need to mount my front license plate on my H3?
 

Well I went to AutoZone and they had a plate mounting kit for $0.99. It has 4 screws and 4 square nylon plugs that are threaded on the inside. Used two of them, they snapped right in the bumper and the plate screwed right on!

Re: what do I need to mount my front license plate on my H3?
 

cool :beerchug:

Re: what do I need to mount my front license plate on my H3?
 

AUH !!!

What I would give for some $ .99 cent screws...

RYD

:beerchug:

Re: what do I need to mount my front license plate on my H3?
 

QUACK (tape)

Any fix for a buck is a good fix!!!

:iagree:

Re: what do I need to mount my front license plate on my H3?
 

You should have had the dealer provide them and put them in, if the state you are in requires plates on the front and back - then it's the dealers responsibility to make the vehicle plate ready. :rant: :)

Re: what do I need to mount my front license plate on my H3?
 

If your going offroad, bend the plate to the bumper and put in 4 screws. Might save the plate

Re: what do I need to mount my front license plate on my H3?
 

:shhh: (:giggling:)

Re: what do I need to mount my front license plate on my H3?
 

I didnt realize that it didnt have mounting provisions until I received the plates. also, I got the vehicle in Ohio and I now live in North Carolina so it was just easier this way :D

Re: what do I need to mount my front license plate on my H3?
 

True