Tag Plate Brkt
 

Ok I have a 2005 H2 with the hard spare cover and where the tag goes it is a whole for the tag plate to sit in and the light above.

I want to use the spare cover to advertise. is there a brkt I can buy to move the tag to the left side around the bumper area and low enough not to hit the swing arm of the spare?
I seen one a few weeks ago but couldn't quite make out how it was attached.
thanks

Re: Tag Plate Brkt
 

you can use a bracket from earlier h2s that had the plate holder and light attached to the drivers side tow hook or if you dont use your hitch much you can use a hitch mount plate holder like mine.

Re: Tag Plate Brkt
 

Nice, didyou make that, or did you buy it? Also it doesn't look as though it has the light attached to it. Does your state require having a tag light? Thanks...and nice looking truck by the way.....jamie

Re: Tag Plate Brkt
 

you can buy them
http://www.etrailer.com/mm5/merchant.mvc?Screen=PROD&Store_Code=E&Product_Code =5443&Category_Code=FMH
i bought a liscense plate frame with a light on it,there always on ebay.

Re: Tag Plate Brkt
 

how about like this?

Re: Tag Plate Brkt
 

I think it was at the drivers side coming off the bracket.
where could I get one?

pne here or at a hummer store or is there an after market one I could get?

thanks

Re: Tag Plate Brkt
 

Thanks a mil. That is kinda what I have been looking for. I'd like to show-off the rear spare instead of having the plastic thingy couver it up. I will get on ebay tonight and see if I can find one with the light. I believe its against the law to not have a lighted plate in Florida. Thanks again.....Jamie

Re: Tag Plate Brkt
 

Is that some sort of TV reciever on the top of your rig? Just curious...Jamie

Re: Tag Plate Brkt
 

I looked on ebay, and nothing. Do you have a company name or anything from where you got one with the light on it? Thanks....Jamie

Re: Tag Plate Brkt
 

yes it is.....satellite....good eyes

Re: Tag Plate Brkt
 

here ya go ,do a search for lighted plate frame theres more.you can run your wires through the hitch so you dont even see them.also try to get a hitch lock from pepboys ,so someone dosent walk away with your plate.


http://cgi.ebay.com/ebaymotors/LICENSE-PLATE-FRAME-LIGHTED-HOT-ROD-STREET-ROD-RAT-ROD_W0QQitemZ330142888708QQihZ014QQcategoryZ42613Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem

Re: Tag Plate Brkt
 

How would I incorporate that to work in the hitch...its just the plate frame? Also, how would I run the wires through the hitch? Thanks for doing research into this for me...I appreciate it....Jamie

Re: Tag Plate Brkt
 

Also, how did you get the center cap on the spare? If it is the stock spare carrier, it has a protruding metal piece that extends out that has the light fixture on the end. Did you somehow cut it down, or what. I hate to start cutting, but if I have to ...oh well. I have a pic I can post up if you are unsure what I am talking about. Thanks again...Jamie

Re: Tag Plate Brkt
 

heres the plate holder ,then you need the lighted frame.
http://cgi.ebay.com/ebaymotors/License-Plate-Holder-Adapter-for-Receiver-Hitch_W0QQitemZ220127302841QQihZ012QQcategoryZ3365 3QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

the lighted frame has the wires on it ,tap into the existing tag light and run the wires trough the
hitch from behind the bumper.

Re: Tag Plate Brkt
 

:beerchug: Thanks bro....Jamie

Re: Tag Plate Brkt
 

Jamie i cut that metal piece off, if you look close you will see the backup camera in center of cap.

Re: Tag Plate Brkt
 

You know...I thught that dot was a reflection of something in the fore ground. Very nice indeed, however I couldn't cut on my wheels, but being a stocker, wouldn't be an issue. Well, I guess I could always order another center cap from the manufactuer. Thanks man. Also, what did you use to cut that thing? It seems pretty freaking thick! Thanks bro....Jamie

Re: Tag Plate Brkt
 

sharp hacksaw

Re: Tag Plate Brkt
 

Got some metal cutting Dremel bits tonight, hopefully it'll work.:D