Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H3 (http://www.elcovaforums.com/forums/forumdisplay.php?f=26)
-   -   Got the 12volt Air Horn Installed (http://www.elcovaforums.com/forums/showthread.php?t=2938)

WikidPete 01-16-2006 07:37 AM

1 Attachment(s)
Finally finished the install of the Air Horn. Thanks to fourfourto for the tips from his POST Here.

Installing a Momentary Switch for the Horn. This is what I came up with for a nice flush look.

WikidPete 01-16-2006 07:37 AM

Finally finished the install of the Air Horn. Thanks to fourfourto for the tips from his POST Here.

Installing a Momentary Switch for the Horn. This is what I came up with for a nice flush look.

WikidPete 01-16-2006 07:38 AM

1 Attachment(s)
Drilled a hole in the blank for the switch

WikidPete 01-16-2006 07:41 AM

1 Attachment(s)
Another PIC Assembled Switch with the blank.

WikidPete 01-16-2006 07:42 AM

1 Attachment(s)
Installed back into the Console. Rear View.

WikidPete 01-16-2006 07:43 AM

1 Attachment(s)
Front View

WikidPete 01-16-2006 07:45 AM

1 Attachment(s)
Front View Close Up

WikidPete 01-16-2006 07:46 AM

1 Attachment(s)
And here are the Air Horns. Much Better than the original.

WikidPete 01-16-2006 07:57 AM

1 Attachment(s)
The compressor is mounted behind the Left Headlight.

Mike E 01-16-2006 12:35 PM

Whoa! That's one (two) serious air horn setup! I feel sorry for the person going slow in front of you!

Good job on the installation. Nice and clean looking.

fourfourto 01-16-2006 12:41 PM

1 Attachment(s)
Nice ! I used the other switch at radio shack it had a bigger button and I removed the blank .I did use same quick connect (for rc car)The switch you used has a nice clean look.
Also I was to lazy to remove grill I just forced the bigger horn through the opening in the grill.
This horn is a inexpensive option to those high priced horns.
My wife blasts it all the time .she's horny.

Heres the switch i used. I thought it matched my lighter so I went with that one.


All times are GMT +1. The time now is 07:03 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.