how do i program the "lock/horn" veture?
 

and the door locks?

i followed the manual and inserting the key to the "lock" position while the car is turned off, you are supposed to push both the lock/unlock buttons on the key fob....but nothing happens...

and the same for the locks....puching and holding down the lock buttton....nothing on the display ever shows up.

any help?


id like my horn to sound when locking/unlocking

Re: how do i program the "lock/horn" veture?
 

im almost positive the procedure you just sated is the one for the H2 but i could be wrong.

Re: how do i program the "lock/horn" veture?
 

You have to go from off to key lock and hold both buttons down on remote until it displays.

page 3-42 http://www.hummeranswers.com/files/hum_h3_2006_man.pdf

Re: how do i program the "lock/horn" veture?
 

I just did that to mine yesterday, the proceedure in the manuals works perfectly. I think I had to keep the buttons on the remote held down during the entire thing. And it did take a few seconds for the display to come up, but it worked.

key in "lock"
Hold both unlock and lock
Press reset stem till the right RFA

by the way RFA=Remote Feedback Action ??? just curious