Hummer Forums by Elcova - Using wheel spacers with 35" MT's?

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)

- General H3 Discussion (http://www.elcovaforums.com/forums/forumdisplay.php?f=23)

- - Using wheel spacers with 35" MT's? (http://www.elcovaforums.com/forums/showthread.php?t=35893)

Bro	11-04-2008 07:45 PM

Using wheel spacers with 35" MT's?

1 Attachment(s)

Hello All,

I recently added 35" Toyo MT's to my 07 H3 and cranked the torsion bars about 2.5 turns to raise the front end up a bit. I'm still experiencing a slight rub on the sway bars. Will utilizing 1/4 wheel spacers cure the rubbing issue without having to extend the wheel studs? I don't really want to go with a full 1 inch spacer as of yet to cure the issue since I have a set of 1/4 spacers on hand.

Mr. Gasket 1/4 Wheel Spacers 6x5.5

Hummer3

11-04-2008 10:28 PM

Re: Using wheel spacers with 35" MT's?

It is a normal symptom for lug bolts to break under the extra pressure that spacers cause.....not a good thing.

wpage

11-05-2008 01:31 AM

Re: Using wheel spacers with 35" MT's?

Why space them at all?

If they only rub a little dont do it. Why stress.

All times are GMT +1. The time now is 04:33 PM.