![]() |
installing h2 front tow hooks
Hello, I'm new to all of this so please forgive my mistakes as I go along as I won't make them a second time. I've purchased new stainless front tow hooks for my H2 and would like some installation advice or instructions if possible. I've tryed to find it here but no luck can anyone advise. Thanks, John
|
Re: installing h2 front tow hooks
Hi, installed stainless hooks on mine too. You must remove the front bumper to get at the bolt for the hooks. Not really a big deal. Make sure to disconnect the driving lights, and you can get at the bolts from underneath to get the bumper off. Not really a bad job. Good luck!:)
|
Re: installing h2 front tow hooks
Thanks, I appreciate the advice. John
|
Re: installing h2 front tow hooks
Thaanks, I apreciate the advice. John
|
Re: installing h2 front tow hooks
Its really almost too easy. There are 4 bolts that hold the front bumper on the H2. Two on the top (pop the round plastic caps off the top of the bumper.) and underneigth you will find a 19mm bolt. The other 2 are on the bottom of the bumper and very easy to get to. Like he said dont forget to pull your driving lilghts out first.
|
All times are GMT +1. The time now is 08:44 PM. |
Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.