Ramps for H2
 

what is everybody using.

Rhino Ramps 12,000 lb only takes tires up to 10" wide.

I need a set of ramps.

thanks

Re: Ramps for H2
 

3 ton floor jack to lift it and four 6 ton jack stands to set it on when I rotate tires and change the oil and lube the grease zerks.

Re: Ramps for H2
 

never liked ramps...I use jacks also.

Re: Ramps for H2
 

BLOCKS!!!!:D

Re: Ramps for H2
 

Just find a bit landscaping boulder and put it in your yard. Drive your H2 up on it when you need the room ahahahhhaha.

Eric
Seriously I dont even have to jack my truck up to change oil etc.... However I am running 2" of lift and 37's. And I dont rotate tires myself I got free lifetime rotation when I bought them.

Re: Ramps for H2
 

I don't trust ramps or concrete blocks much. I'm a firm believer in hydraulic jacks backed up with commercial grade jack stands. I've had a Torin 20 ton, long shaft hydraulic jack for many years and they are hard to beat cost and quality wise. I know it's overkill, but it's better to have too much jack than too little. This is a newer model, but similar to the old one in design and price. You can use it manually or with your air compressor.
http://www.northerntool.com/webapp/w...55?cm_vc=C5503