Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Technical Discussion and Customizing your H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=5)
-   -   Intake / Exhaust for better mileage (http://www.elcovaforums.com/forums/showthread.php?t=38471)

pdxrealtor 11-09-2009 09:06 PM

Intake / Exhaust for better mileage
 
Will standard K&N intakes work as good as a cold air setup to improve gas mileage?

RE: the exhaust....

I will purchase one for the same reason, to help a tad with mileage (God I love it when I have good excuses to buy something!)

What is exhaust flows well but isn't that loud? I've come to really like the quieter cabin.

Will doing a cat back only help with the gas mileage?

IRA51 11-10-2009 12:16 AM

Re: Intake / Exhaust for better mileage
 
This has been covered many times ,the stock setup works just fine. if you want to see for yourself . dyno your stock setup and then buy the K&N and cat back . dyno that ,and compair the 2 . you may find 1 or 2 HP above 3500 rpm ,but that's it . do you drive in that rpm range ? as far as mpg ,at 1800 to 2200 there is no differance.

pdxrealtor 11-10-2009 02:44 AM

Re: Intake / Exhaust for better mileage
 
Quote:

Originally Posted by IRA51
This has been covered many times ,the stock setup works just fine. if you want to see for yourself . dyno your stock setup and then buy the K&N and cat back . dyno that ,and compair the 2 . you may find 1 or 2 HP above 3500 rpm ,but that's it . do you drive in that rpm range ? as far as mpg ,at 1800 to 2200 there is no differance.


Thanks for the reply....much appreciated!

HUMMERcustoms.com/TAZ 11-11-2009 05:08 AM

Re: Intake / Exhaust for better mileage
 
IRA is correct, go with his advice. You would gain some torque with catback but, not great. You would need long tube headers to go with them to get most out of both.
TAZ

pdxrealtor 11-11-2009 05:16 AM

Re: Intake / Exhaust for better mileage
 
Thanks TAZ!

I did go with his advice... I didn't order either one, cold air OR exhaust.

For now I'm just going to get used to the H2 mechanicals... and work on the cosmetics..

Thanks again!!! :beerchug:


All times are GMT +1. The time now is 06:20 AM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.