Hummer Forums by Elcova

Hummer Forums by Elcova (http://www.elcovaforums.com/forums/index.php)
-   Photos of YOUR H2 (http://www.elcovaforums.com/forums/forumdisplay.php?f=4)
-   -   Black H2 (http://www.elcovaforums.com/forums/showthread.php?t=403)

mboard 03-30-2004 02:10 AM

1 Attachment(s)
Here are photos of my BLACK H2. Tinted lenses, windows, powder coated wheels, 15k Warn winch.

mboard 03-30-2004 02:10 AM

Here are photos of my BLACK H2. Tinted lenses, windows, powder coated wheels, 15k Warn winch.

mboard 03-30-2004 02:10 AM

Here are photos of my BLACK H2. Tinted lenses, windows, powder coated wheels, 15k Warn winch.

mboard 03-30-2004 02:11 AM

1 Attachment(s)
another photo

mboard 03-30-2004 02:12 AM

1 Attachment(s)
another...winch photo

DRTYFN 03-30-2004 03:51 AM

I have some questions:
How do you access the winch?
How do you check on your cable to see if it's spooling properly?
Where's the clutch handle?

How much did you have to cut the frame to fit the winch in there? And what did you secure it to? And how did you secure it. Did you load test it?

sand-hog 03-30-2004 04:07 AM

"SMOKE OUT" ALL THE LIGHTS!!....IT WILL MAKE A HUGE DIFFERENCE AND WILL LOOK ALOT BETTER...

Circuitguy 03-30-2004 04:23 AM

Those lenses still look like the OEM factory ones. Check out this thread. Now thats tinted lenses! BIG-C

http://elcova.com/groupee/forums?a=tpc&s=2826088551&f=2606011751&m=949100043

Navigator 03-30-2004 09:58 AM

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Circuitguy:
Those lenses still look like the OEM factory ones. Check out this thread. Now thats tinted lenses! BIG-C

http://elcova.com/groupee/forums?a=tpc&s=2826088551&f=2606011751&m=949100043 <HR></BLOCKQUOTE>

Big-C are you giving yourself a pat on the back?

Circuitguy 03-30-2004 12:14 PM

No, Just stating my opinion...Hehe!! BIG-C

mboard 03-30-2004 02:28 PM

Lenses are as dark as those posted, however flash on camera makes them look lighter. Tinted by company in S.Cal through Winkel Hummer. They offer an exchange program so you don't have to send off and wait for lenses to be tinted. Winch was installed and tested for load by Custom Motorsports www.custommotorsports.com for $2,000.00. Clutch handle is in photo on left of winch and wire connection to right. Very clean installation. They had to slightly modify winch corners and also drop skid plate approx 1/2".

DiscoDancingRover 03-30-2004 02:36 PM

Is your suspention different, looks like you have something similar to the Old Man Emu LTR shock (I know they aren't those, but the look)?

mboard 03-30-2004 03:05 PM

Shocks are Rod Hall (Hummer Race Team) extreme travel shocks. What you see in photo's is resevoir for fluid. Makes for consistent response of shock as keeps fluid cool. See at www.rodhall.com

FrgMstr 03-31-2004 02:04 AM

Shoulda got 37s. I gotta say that winch rigging is pretty damn nifty although I dont know if I am for making anything closer to the ground on these H2s.

I am going to wait and see how Det's Road Armor bumper works out for him, but Drty makes some VERY good points as I have seen the enclosed winch cause some problems when it comes to spooling wire. Guess synth rope would be a must have...

Prodigy 03-31-2004 11:19 AM

Now all you need is a nice coat of Meguiar's Gold Class paste wax. I used that stuff and it looks about 100x better than when I bought it.

FrgMstr 03-31-2004 01:14 PM

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Prodigy:
Now all you need is a nice coat of Meguiar's Gold Class paste wax. I used that stuff and it looks about 100x better than when I bought it. <HR></BLOCKQUOTE>

Actually what I think you meant to say what that it needed some dirt on it. Way too clean.

Detonate 03-31-2004 01:35 PM

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by FrgMstr:
I am going to wait and see how Det's Road Armor bumper works out for him, but Drty makes some VERY good points as I have seen the enclosed winch cause some problems when it comes to spooling wire. Guess synth rope would be a must have... <HR></BLOCKQUOTE>Actually, I know what you are talking about, but the RA bumper doesn't fall into that catagorey, because you can actually see the wire spool, and can actually manipulate the wire with a hammer, screwdriver or whatever.

The problem I had with my winch wire, besides it being my fault for doing something as stupid as trying to move the solenoid, it would have happened no matter where the winch was installed, even if it was completely loose from a housing all together.

Hummer Man 03-31-2004 04:32 PM

Your Halfway there - it looks good goto LIMO TINT on the windshield!!

mboard 03-31-2004 04:50 PM

What is limo tint?

Grim_Smoker 03-31-2004 06:39 PM

limo tint = 0% tints


All times are GMT +1. The time now is 11:17 PM.

Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.