![]() |
Tire and wheel suggestions...
I have a 2005 H2 SUT. Yellow, Chromed out but its missing some nice wheels and tires. I like the stock ones but I want something a bit beefier. I like the KMC XD wheels and I like Toyo Open Country M/T wheels and the Nitto Grapplers.
How big can I go with the tires without having to lift it or sacrifice my steering? Also, would 20' Inch wheels be adequate? |
Re: Tire and wheel suggestions...
37 inch tires
12.5 width wont need a lift. might have to crank the torsion bars some. |
Re: Tire and wheel suggestions...
I just found my next set of wheels... MOTO METAL 909 SKULL with Nitto Grapplers.
Absolutely bad ass. |
Re: Tire and wheel suggestions...
with 4.53" back space, they will stick waayyyyy out. You will also need to stick with a 35" tire. 37's with that wheel spec will rub without a lift.
try to find a 9" wide wheel with 4.75 to 5" backspace and you can run a 37 12.50 MT tire and will fit with little to no rub..maybe a slight tbar crank needed. |
Re: Tire and wheel suggestions...
Quote:
This. |
Re: Tire and wheel suggestions...
So whats the verdict? 35s with a crank on the bars?
|
Re: Tire and wheel suggestions...
On stock rims you can run the toyo 37x13.5 m/t but will need to crank the tbars and change the front shocks.
|
Re: Tire and wheel suggestions...
As I understand it, it's all in the backspacing of the wheel. I bought my truck used with the Fabtech 6" kit already installed. The guy had Toyo 37x13.50x22's on it and it rubbed. The wheels had too little backspacing.
|
All times are GMT +1. The time now is 01:26 AM. |
Powered by vBulletin Version 3.0.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.