Lights
 

Anyone tried to replace their own light sensor? My headlights are always in the night mode, even in bright daylight.

Re: Lights
 

Shouldn't be hard....or its not rather. U will have to pull a lot of the dash to get to it

Pull the give box door off (3 screws bottom of the door)
Pull the cover on the pass side dash around the airbags (air bag stay installed)
There are 2 quick release push buttons to get the grab bar to slide off.
pull the AC vent panel on the drivers side and also the cluster housing panel
pull loose your center console panel(around the steroids/AC)
That gives you access to the screws that hold you forward dash panel on take all of them out and it slides aft. That sensor has a plug and about 1/4 of a turn and it comes off


It sounds like a lot but its not. Basically all the chrome hexhead screws

Good luck sir